Question about 1999 Lincoln Continental

1 Answer

1999 lincoln keypad stopped working

The unlock code for my car just stopped working. the (7/8)(9/0) together combo will still lock it, but nothing happens with my unlock code. Any idea how to get that back in there?

Posted by on

  • 2 more comments 
  • Kate
    Kate Apr 01, 2014

    That was my thought too. However, I don't have one. Thats why I turned to the internet!

  • yadayada
    yadayada Apr 02, 2014

    You can obtain the owners manual on line at the Ford fleet site.

  • yadayada
    yadayada Apr 02, 2014

    Go here.

  • yadayada
    yadayada Apr 02, 2014

    https://www.fleet.ford.com/maintenance/o...

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Lincoln Master
  • 76,848 Answers

Read in the owners manual and it will tell you how to reprogram the key pad.

Posted on Apr 01, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
chuck943
  • 783 Answers

SOURCE: brake lighs stop working

Does the 3rd brake lamp illuminate? If so then your problem is multifunction switch.If it doesn't do the following checks.
Check for power to and thru the brake lamp switch itself.If you do not have power to the switch check fuse no. 10(20 amp) in the interior fuse panel.If you have power to the switch then depress brake pedal and make sure you have power thru the switch.If this is ok the check Fuse 22(20amp) with brake applied..

Posted on Mar 01, 2009

emissionwiz
  • 76848 Answers

SOURCE: 1999 lincoln town car fuel gage not working

99% of the time this is due to a defective gas gauge sending unit, this is located in the gas tank.

Posted on May 01, 2009

  • 1 Answer

SOURCE: I need the door lock code location for my 2004 Town Car

The code should be on a white sticker located on the truck hinge. Mine is on the right hinge.

Posted on Jun 28, 2009

SOURCE: how can i find the keypad code on my 2004 lincoln

In the grey folder with your owners manual,is a white card with the factory code,for the keyless entry keypad. It also, tells you, how to put in your own code

Posted on May 16, 2010

  • 1 Answer

SOURCE: Lincoln Continental2000-Door key won't unlock door-but starts car

I locked the 2000 lincoln continental with the key fob but lost it now the ignition key wilolo not unlock the door

Posted on Sep 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Locked key in 2006 Lincoln Navigator can I unlock from outside without code


do you have another key or key fob --if you dont have a code to unlock door assuming code for door keypad no code doors stay locked --notify aaa if member---check your insurance policy some now have roadside=lockout assistance,or call a locksmith or service station that does lockouts

Aug 31, 2016 | Lincoln Cars & Trucks

1 Answer

How do you program the transmitter on a 1996 Lincoln Town Car?


1. Enter 5-digit permanent entry code into the keyless entry keypad.
2. Within 5 seconds of pressing last button of code, press the 1/2 button. All doors will lock then
unlock confirming you are in programming mode.

3. Press any button on first Keyless Remote within 5 seconds of pressing the 1/2 button. Locks will
cycle to indicate succesful programming.

4. If you are programming more than one Keyless Remote (Including any exsiting remotes) Press
any button on second keyless remote within 5 seconds of previous remote. Locks will cycle again
to indicate succesfull programming. (If the keypad light goes out before all remotes are
programmed the entire process must be repeated).

5. Press the 7/8 and the 9/0 buttons simultaneously on the keypad to exit program mode.

Mar 28, 2013 | 1996 Lincoln Town Car

1 Answer

How do i get my factory remote to work on my 1997 lincoln town car


Pretty simple really. all you need to do is enter your code into the keypad located on the vehicle (the code to unlock and lock the doors/the normal code you always use). Then press the 1/2 button on the keypad. then just press one button on the remote. Your doors should lock and unlock to let you know the programming was a success. If you are doing more then one remote press the other ones within i think 5 seconds to program that remote as well. I hope this helps and good luck.

Mar 02, 2011 | 1997 Lincoln Town Car

1 Answer

Keypad entry has quit working


Reinstall your own code,if the preset works and you still have the little instruction card. If not let me know,I'll look at mine and go over the service manuals

Apr 29, 2010 | 2001 Lincoln LS

1 Answer

I don't have a manual for my 2004 lincoln Avaitor but would like to know how I can change the code on the drives door key pad


KEYLESS ENTRY SYSTEM With the keyless entry keypad, you can: • lock or unlock the vehicle doors without using the key. Your vehicle has a factory set 5 digit code that operates the keyless entry system. You can also program your own 5 digit personal entry code. The factory-set code is located: • on the owner's wallet card in the glove compartment • or at your dealer. When pressing the controls on the keyless entry keypad, press the middle of the controls to ensure a good activation. This system will disable the power door lock controls. These will not work until the vehicle is disarmed. Programming your own personal entry code To program your own code: 5. Enter factory set code (keypad will illuminate when pressed). 6. Press 1/2 control within five seconds of step 1. 7. Enter your personal 5 digit code. Enter each digit within five seconds of previous one. 8. After the code is entered, the locks will cycle, confirming that the new code has been set. Do not set a code that includes five of the same number or presents them in sequential order. Thieves can easily figure out these types of codes. Your personal code does not replace the permanent code that the dealership gave you. You can use either code to unlock your vehicle. If a second personal code is entered, the module will erase the first personal code in favor of the new code. Locks and Security 149 Locks and Security If you wish to erase your personal code, use the following instructions: 1. Enter factory set code. 2. Press 1/2 control and release. The system will now only respond to the factory set code. Anti-scan feature The anti-scan feature prevents repeated attempts at arriving at a valid key code. The keyless entry pad is disabled for 1 minute after 7 unsuccessful attempts (35 consecutive button presses) at entering a valid key code. The keypad will flash during this 1 minute mode. However, the 7/8 and 9/0 controls will still lock the vehicle. Anti-scan will be turned off after: • one minute of keypad inactivity. • the remote entry transmitter UNLOCK button is pressed. • the ignition is turned to the ON position. Unlocking the doors with the keyless entry system To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will also illuminate. To unlock all doors, enter the factory set code or personal code (driver door unlocks) and press the 3/4 control within five seconds. Locking the doors with the keyless entry system It is not necessary to enter the factory or personal code prior to locking all doors. To lock the doors: • with the driver's door closed, press the 7/8 control and the 9/0 control at the same time.

Dec 17, 2009 | 2004 Lincoln Aviator

1 Answer

Keypad door lock does not work..?


it's in owner manual. But, first you have to enter your original code and it must work. then you press the 1 button and then enter a new 5 digit code, then press the 1 button again.

Keyless Entry Keypad To unlock the driver front door (20124) , and disarm the anti-theft alarm control (19A366) , (if equipped):
  • Enter the permanent factory code.
  • Enter the owner's alternate code.
To unlock the passenger door(s), press the 3/4 button within five seconds of unlocking the driver door or luggage compartment. To unlock the luggage compartment door (40110), press the 5/6 button within five seconds of unlocking driver or passenger door(s). To turn on the courtesy lamps and light all illuminated components, lift either front door handle (22404) or press any button on the keyless entry keypad (14A626) . To lock all doors, press the 7/8 and 9/0 buttons at the same time with all doors closed. (It is not necessary to enter the key code first.) This will turn off courtesy lamps and arm anti-theft alarm control (if equipped). To program an alternate code:
  1. Enter the five digit permanent entry code into keyless entry keypad .
  1. Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent code.
  1. Enter any alternate five digit code within five seconds of pressing 1/2 button.
    • Enter a sixth digit as follows to indicate operator's memory seat setting to be set by alternate code:
      • 9/0 — no memory recall
      • 1/2 — memory seat position 1
      • 3/4 — memory seat position 2
      • 5/6 — memory seat position 3
    • After successful programming, the doors will signal by locking and then unlocking.
---------------------------------------------
  • Keyless Entry Keypad Does Not Work Properly
  • Circuit.
  • Keyless entry keypad.
  • Electronic door lock control processor.

  • Open Fuses:
    • Town Car and Crown Victoria/Grand Marquis
    • Power Distribution Box (under hood)- K, 40A (Maxi)
    • Instrument Panel Fuse Panel - 17 (10A), 10 (20A), 8 (15A), 5 (15A) and 4 (10A)
  • Loose Connectors
  • Corroded Connectors
  • Oct 04, 2009 | 1995 Lincoln Town Car

    2 Answers

    1999 lincoln con


    SECTION 501-14B: Keyless Entry/Computer Operated Locks 1999 Town Car Workshop Manual GENERAL PROCEDURES Programming —Keyless Entry Keypad Code
    1. Enter the permanent factory keyless entry keypad code.
    1. Press the 1/2 button within five seconds to activate the programming mode. Holding the 1/2 button for more than two seconds will erase all stored customer codes. The existing codes do not need to be erased to program new codes.
    1. Enter the new five-digit keyless entry keypad code.
    1. To associate the new code with personality positions 1, 2 or 3, press the 1/2 button within 5 seconds of entering the 5th digit of the new code for position 1 or 3/4 button for position 2 or 5/6 for position 3. The door locks will lock and unlock confirming the new code is programmed.
    1. If another code is to be programmed, begin entering the code within 5 seconds of the last button pressed.
    1. After all new keyless entry codes are programmed:
      • Press keyless entry keypad buttons 7/8 and 9/0 at the same time to exit the program mode.
      • Wait for 5 seconds; the driver door module (DDM) will exit the program mode automatically.
      • -------------------------------------------------------------
    Programming —Transmitter
    1. Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming program mode has been entered.
    1. NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.
      Press any button on the transmitter to be programmed.
    1. If additional keyless entry remote transmitters are to be programmed, repeat step 2 within 7.5 seconds.
    1. To exit program mode, turn the ignition to START or wait 7.5 seconds.
    --------------------------------------------------
    Programming —Remote Memory Activation NOTE: This procedure must be completed within 5 seconds.
    1. Press the SET button on the driver door panel.
    1. Press any button on the keyless entry remote transmitter to be associated with a memory setting.
    1. Press the 1 or 2 memory button on the driver door panel.
    -------------------------------------------------------------
    Programming —Autolock and Horn Chirp
    1. NOTE: This procedure must be completed within 30 seconds.
      Turn the ignition switch to RUN.
    1. Press the UNLOCK button three times.
    1. Turn the ignition switch to OFF.
    1. Press the UNLOCK button three times.
    1. Turn the ignition switch to RUN. The doors will lock and unlock to confirm entry into program mode.
    1. Press the UNLOCK button once to toggle the Autolock feature on or off, or twice to toggle the Horn Chirp function on or off. The horn will chirp to confirm toggling of the Autolock feature.
    1. Exit program mode by turning the ignition to OFF, START, or wait 7.5 seconds.
    ----------------------------------------------------------------------------------

    Apr 07, 2009 | 1999 Lincoln Town Car

    1 Answer

    Door key pad, won't unlock door


    1. Enter the permanent factory remote keyless entry (RKE) keypad code.
    1. Press the 1/2 button within 5 seconds to activate the programming mode associated with the memory position 1 settings. Holding the 1/2 button for more than 2 seconds after activation erases the stored personal code.
    1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed and associated with the memory position 1 settings. Entering any new personal code automatically erases the old personal code.
    1. Press the 3/4 button within 5 seconds to activate the programming mode associated with the memory position 2 settings. Holding the 3/4 button for more than 2 seconds after activation erases the stored personal code.
    1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed and associated with the memory position 2 settings. Entering any new personal code automatically erases the old personal code.
    1. Press the 5/6, 7/8, 9/0, 7/8 and 9/0 button within 5 seconds to activate the programming mode or allow the system to timeout.
    1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed. Entering any new personal code automatically erases the old personal code.

    Jan 23, 2009 | 2005 Ford Freestyle

    2 Answers

    Lincoln Continental2000-Door key won't unlock door-but starts car


    I locked the 2000 lincoln continental with the key fob but lost it now the ignition key wilolo not unlock the door

    Jan 01, 2009 | 1999 Lincoln Continental

    1 Answer

    I have a 99 lincoln town car signature the left window is very slow going up or down. I can not open my car using the code # on side wiyhout the key


    Try clear silicone spray in the window runs. They are the felt covered channel that the window glass moves up and down in- make sure to spray enough so the lube gets down inside the runs that are inside the door. Keyless problem need more info- Can you lock doors by hitting last 2 buttons together? If so hit 1 button at a time to see if makes keypad light up- If one button does not keypad needs replacement. Also double check number- Alot of people will put their own codes in system. If battery loses power or is disconnected that code will be forgotten and factory code will only work- Factory code should be on a sticker on the right side trunk hinge arm.

    Dec 29, 2008 | 1999 Lincoln Town Car

    Not finding what you are looking for?
    1999 Lincoln Continental Logo

    56 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lincoln Experts

    yadayada
    yadayada

    Level 3 Expert

    76848 Answers

    fordexpert

    Level 3 Expert

    5546 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Are you a Lincoln Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...