Question about 2001 Ford Taurus

1 Answer

2001 ford taurus computer keeps failing locking all systems,why?

Computer fails locking all system

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Ford Expert
  • 245 Answers

What system is it locking?"

Posted on Dec 23, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

daves944
  • 1050 Answers

SOURCE: vehicle failed emissions testing

You need to replace the intake upper plenum gaskets. There is two pieces, a top cover with one big silicone o-ring gasket and a lower half with six smaller silicone o-rings for the individual intake ports. You can buy these as a set, just for this job. Start this job by removing the wiper blades, then release all the screws, (including the ones that support the wiper motor), that hold that big black plastic valence at the back of the engine compartment. Pull that out of the way, you will have to pull the windshield washer hose through it, just disconnect it on the engine side, now you have access to the plenum. It's a pretty easy job now to remove and replace both halves, just a bunch of 8mm screws hold it all together. Take notes or digital pics along the way so you can pop it all back together. My only caution would be; when you have it apart, do not drop anything in the intake port! I always stuff kleenex in these while I'm working in case something slips out of my hands. Also, don't over tighten, it's all plastic. If you don't want to do it yourself, a shop should charge about an hour and a half, plus the codes must be reset and the van driven until all the monitors are ready.

Posted on Mar 26, 2009

chuck943
  • 783 Answers

SOURCE: Spark plug firing order Ford Taurus 2001

1-4-2-5-3-6

Posted on Apr 08, 2009

  • 1146 Answers

SOURCE: I need a replacement keys for 2001 ford taurus

A good place to start is a ford dealer. Often they can cut you a key off the VIN number. You will have to go there in person., and some kind of proof of ownership would be needed!

Posted on Apr 02, 2010

csmock132
  • 4669 Answers

SOURCE: 2001 ford taurus 3.0 liter ohv serpentine belt

3.0 OHV Vin U24dba77.gif

Posted on Apr 03, 2010

  • 123 Answers

SOURCE: diagram of serpintine belt 2001 ford taurus

here it is4777b9b.gif

Posted on Jul 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car starts then dies let it sit for 30 min started right up then a week later same problem


Are you loosing spark or fuel pressure when it stops running ?
You need to know which system is failing to know what to check.

Aug 26, 2013 | 2001 Ford Taurus

2 Answers

What does the codes p0442,p0136 &p0141 mean on my 2001 ford taurus it failed inspection for these codes


P0442 FORD - Evaporative Emission System Leak Detected Small Leak

Possible causes- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0136 - O2 Sensor Circuit Malfunction Bank 1 Sensor 2
Possible causes- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

P0141 FORD - O2 Heater Circuit Bank 1 Sensor 2

Possible causes- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)

Sep 27, 2012 | 2001 Ford Taurus

2 Answers

2001 ford windstar drivers power door lock does not work


Most likely a failed driver's door lock actuator.

Mar 24, 2012 | 2001 Ford Windstar

1 Answer

2001 taurus over heating ,smell gas in radiator why?


typical 3.0 liter engine....head gasket failure...you can by a hydrocarbon kit from napa to test this...it tests for exhaust oin cooling system by perking the air in botle through a solution that changes color with prescense of exhaust...the cooling system was suspect at best back then and gaskets failed on regular basis

Jun 15, 2011 | 2001 Ford Taurus

1 Answer

Car stuck in anti theft mode. theft light keeps blinking. it's a 2003 Ford Taurus.Car wont turn on when key turned.


NEED TO RUN THEFT CODE CHECK TO VERIFY WHAT PART OF THEFT SYSTEM IS FAILING .COULD BE JUST KEY ,IGNITION SWITCH OR AN ELECTRICAL PART

Dec 25, 2010 | Ford Taurus Cars & Trucks

2 Answers

Failed smog test because of fault code po174 : system too lean (bank 2) ford taurus 1998


Leak on the intake, bad EGR valve that's not closing. Perhaps a bad O2 sensor, but probably not. The O2 sensor is what detects a rich/lean condition. But when they fail they usually give their own error codes.

Feb 05, 2010 | 1998 Ford Taurus

2 Answers

Brake pedal goes to floor,replaced front pads rear good,bleed brakes no help


Hi:
If you have replaced all pads, and see no leaks at any wheel, and have bled your brake system, then most likely your brake master cylinder has failed.

Dec 18, 2009 | 2001 Ford Taurus

1 Answer

I need diagram for evap system for 2003 Ford


You DO NOT necessarily need special testing and tools to fix this. Many auto parts stores have scan tools that they'll hook up for free as a diagnostic aide. Your evap system is solely to keep fuel vapors from escaping into the atmosphere when your car is OFF, but you will fail emissions testing with a leak.

Dec 04, 2009 | 2003 Ford Taurus

1 Answer

2001 Ford Taurus door locks


The electric motor that pulls the lock button up and down has failed, you will need to pull the door panel to replace it. Yes it is fairly common.

Jul 28, 2008 | 2003 Ford Windstar

Not finding what you are looking for?
2001 Ford Taurus Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...