Question about 2004 Ford F150

1 Answer

Want start has new plugs and coils

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 115 Answers

Does it crank?yes have your battery pass the 400A load test...do u
have gas?check if it reaches the engine....

Posted on Apr 01, 2014

Testimonial: "yes it cranks yes it has fuel and getting fuel new battery it started with a miss code said miss in cyl 1 2 6 I replaced all 8 coils still had miss replaced all 8 plugs now it wants to start but want or when it dose it still missing then dies"

  • 1 more comment 
  • GASTON CHOUINARD Apr 01, 2014

    distribution gas at injectors is good?when you start the engine does it smell gas at end pipe?

  • David Elliott
    David Elliott Apr 02, 2014

    yes

  • GASTON CHOUINARD Apr 02, 2014

    the engine is flooded!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It mayI have no fire going to the coil or from the coil to the plugs


Have you checked the wiring, the spark @ plug, Power to the coil???

Engine Won't Start No Spark - Auto Diagnosis Repair Help

aa1car.com/library/no_spark.htm
If your engine cranks normally but will not start because it has no spark, or it ... If an engine has a coil-on-plug ignition system with no plug wires, remove one of ...

No-start, No-Spark diagnosing simulated - YouTube

? 5:13
https://www.youtube.com/watch?v=XSWN1M8Hoqo
May 19, 2010 - Uploaded by FrankHurtAuto
Simulation of no start with no spark diagnosing, ... Ignition coiland module test with test light (ScannerDanner Premium lecture) - Duration: ...

getting fire from coil but not to plugs - CarGurus

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusJun 12, 2013 - 2000 dodge ram 1500 4x4 not getting fire changed distributor cap, coil, pickup ignition, rotor, plugs, plug wires 2 answers. ... 1994 dodge 5.9 just shut off and wont start back up there is no spark or fire from coil or plugs. ... 94 dodge van 318 eng will not start new plugs new crank ...

Ignition Coil Troubleshooting: (No) Fire in the Hole

www.secondchancegarage.com/public/coil-troubleshooting.cfm

Jan 27, 2016 | Cars & Trucks

1 Answer

Chrysler town country engine light flashes 10 times


does it have coil packs? you may need to replace one

Jan 26, 2013 | 2004 Chrysler Town & Country

2 Answers

2004 envoy 4.2 6cyl. runs rough. had a new


take the breather off and take a 10 mm socket to take the coil off easy to get to then take a 5/8 plug socket to take out plugs easy to get to,

Jan 03, 2010 | 2003 GMC Envoy Xl

1 Answer

4 cyl. won't start,new plugs, wires,cap,etc.


a crank sensor tells the coil to fire.are you getting a signal at the coil to fire?

May 25, 2009 | 1995 Jeep Wrangler

1 Answer

Changing spark plugs


Changing the spark plugs on a 1997 Ford Expedition 5.4L engine takes patience. Remember to start this project on a cold engine! I started on the passenger side by locating the Coil over iginition coils and cleaned out all the old dirt using some compressed air. Then I had to disconnect the electrical connections to both the Coil over ignition coils and the passenger side fuel injectors. Once you remove the small bolt which holds the ignition coil in place, use your compressed air again to blow out the spark plug hole. After that, you will need a 5/8" swivel spark plug socket and various length extensions to remove the spark plugs. Take your time because there is not much room for your hands. Before installing the new plug, check the gap and use clean engine oil on the new threads. Tighten the new spark plug and reinstall the coil over ignition coil. Reconnect the electrical connection to both the ignition coil and the fuel injector. Continue these steps with all eight spark plugs. You will find the ones on the drivers side are difficult because of the fuel rail gets in your way. Have patience and use swivel extensions to work around the tight spaces. When you are done, you will have saved lots of money! Don't forget to replace your air filter, fuel filter, and pcv valve to complete your tune up.

Jun 19, 2008 | 2003 Ford Expedition

Not finding what you are looking for?
2004 Ford F150 Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...