Question about 2007 Honda Ridgeline

Open Question

Honda ridgeline dealer suggest replacing sensor bank 1 & sensor 1 because they got a dtc p0134 ho2s b1 s1 no activity. so whick sensor should be replaced

Honda ridgeline dealer suggest replacing sensor bank 1 & sensor 1 because they got a dtc p0134 ho2s b1 s1 no activity. so which sensor should be replaced

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Honda ridgeline oxygen sensor bank 2 sensor 1;is

Here is how you guys can tell, which bank it is...Rule of thumb..Bank 1 is where the first piston firing order is.....Which in the Honda Ridgeline is in the rear...If you look at the motor its side ways ok...The best way to judge the first piston is to look at the spart plug cover....the one that is the closest to you is the first piston....Remember your looking at the engine as if it were straight, however honda ridgeline is side ways...So the front of the piston is on the passenger side...Ok...I hope this helps...

Posted on Sep 27, 2012

Ad
  • 819 Answers

SOURCE: Engine light came on - yellow. Code: P0134 02

there is either a problem with the wiring going to the front oxygen sensor, or with the oxygen sensor itself. good luck!

Posted on Mar 31, 2010

Testimonial: "Thanks - I'll have someone look into it!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix a code p0134 for my 1999 infintiy i30


code p 0134 refers to heated oxygen sensor(HO2S) 1 bank 1--no activity detected ===causes wiring open circuit ---heating inoperative ---HO2S Sensor
also refers to oxygen sensor (O2S) --no activity detected ===causes --- wiring---O2S
the HO2S is in the exhaust manifold before the cat converter
the O2S is after the cat converter
check the wires and connections , then replace either or both sensors

Oct 22, 2016 | Cars & Trucks

1 Answer

P1884 code 2005suzuki forenza P0420 P0134 P0138


code p 420 refers to cat converter system , bank 1--efficiency below threshold ===causes ---cat converter faulty---wiring --heated oxygen sensor (HO2S), 2 faulty
code p 0134 refers to HO2S 1 bank 1-no activity detected ===causes --wiring open circuit -- heating inoperative --- HO2S
also refers to oxygen sensor ( O2S) 1 bank 1--no activity detected == causes wiring ---O2S
code p 0138 refers to HO2S 2 bank 1--high voltage === causes ---wiring short to positive ---HO2S--- ECM
also refers to O2S 2 bank 1 high voltage === wiring short to positive O2S -- ECM
I do not have a listing for code p 1338 but I suspect that it will refer to the other codes in some way
first fix is to check the cat converter is operational ( not cracked and blocking the exhaust system)
next replace the HO2S sensor ( one before the cat converter ) and then the O2 sensor (the one after the cat converter)
all the codes will relate to problems in that area

Sep 01, 2016 | 2005 Suzuki Forenza

1 Answer

1998 Infiniti I30 trouble code P0134 were are the oxygen sensors?


code p 0134 refers to heated oxygen sensor(HO2S) 1 bank 1--no activity detected ===causes ---wiring open circuit--heating inoperative---HO2S sensor
it also refers to oxygen sensor (O2S) 1 bank 1 --no activity===causes wiring -- oxygen sensor
HEATED oxygen sensors are in the exhaust manifold or exhaust pipe before the cat converter
oxygen sensors are in the exhaust pipe after the cat converter
bank one is the side closest to the radiator on a cross fitted engine or on the lhs with you facing the fan

Aug 10, 2016 | Infiniti Cars & Trucks

1 Answer

These are the codes i got p0030, p0053,p0302,p0053, p0054,p0134


Hi,

Code explanations as follows:

P0030 = HO2S Heater Control Circuit (Bank 1 Sensor 1)
P0053 = HO2S Heater Resistance (Bank 1, Sensor 1)
P0054 = HO2S Heater Resistance (Bank 1, Sensor 2)
P0134 = 02 Sensor Circuit No Activity Detected (Bank 1, Sensor 1)
P0302 = Cylinder 2 Misfire Detected


Cheers,




"If this has helped you, please rate this solution"

Nov 01, 2011 | 2005 Chevrolet Equinox

2 Answers

I'm getting codes po134 and po130 and knock sensor no continuity ,the wiring is good leading to the pcm and 02 sensor is brand new,and it has continuity. the last resort would have to be having the...


Too often sensors are replaced when in fact they are doing what they are suppose to do, report back to the PCM. A good diagnostic scan can capture what is going on in real time and help determine what steps need to be taken to correct the problem.
Here is a brief example of how 02 sensors work.

The powertrain control module (PCM) supplies a bias voltage of about 450 mV between the heated oxygen sensor (HO2S) high signal circuit and the HO2S low reference circuit. When measured with a 10 mega ohm digital voltmeter, this may display as low as 350 mV. The oxygen sensor signal varies from about 800 mV when the exhaust is rich, to about 50 mV when the exhaust is lean.If the HO2S 1 voltage remains at or near the 450 mV bias for an extended period of time, DTC P0134 is set. If the signal amplitude of HO2S bank 1 sensor exceeds the no activity (P0134) thresholds but will not allow closed loop operation, DTC P0130 will set.
If the HO2S 1 voltage remains excessively low for an extended time, DTC P0131 will set.
If the HO2S 1 voltage remains excessively high for an extended period of time, DTC P0132 will set.
During the monitoring period, the PCM counts the number of times that a rich-to-lean and lean-to-rich response is indicated and adds the amount of time necessary to complete all transitions. With this information, an average time for each transition can be determined. If the average response time is too slow, a DTC P0133 will be set.
If the HO2S 1 voltage remains at or near the 450 mV bias for an extended period of time, DTC P0134 is set...it's possible all you need is a reflash of your OBD.

Jul 05, 2011 | Pontiac Grand Am Cars & Trucks

1 Answer

05 dodge cummins,driving down roadway ,throttle will climb erratically for about 3-4 seconds when coming to a stop, it has electrical throttle connections ,no cables that i can see. When parked idling and...


To retrieve OBDII Error codes from your Chrysler/Jeep/Dodge vehicle, do the following sequence with the key: ON-ACC-ON-ACC-ON and look at the odometer, that is where codes will be displayed. Here are the codes that you may/can get.

Ho2S = heated oxyen sensor, TP = throttle position, MAF = mass airflow, MAP = manifold absolute pressure, TC=turbocharger.
P0030 HO2S Heater Control Circuit Bank 1 Sensor 1
P0031 HO2S Heater Circuit Low Voltage Bank 1 Sensor 1
P0032 HO2S Heater Circuit High Voltage Bank 1 Sensor 1
P0036 HO2S Heater Control Circuit Bank 1 Sensor 2
P0037 HO2S Heater Circuit Low Voltage Bank 1 Sensor 2
P0038 HO2S Heater Circuit High Voltage Bank 1 Sensor 2
P0050 HO2S Heater Circuit Bank 2 Sensor 1
P0051 HO2S Heater Circuit Low Voltage Bank 2 Sensor 1
P0052 HO2S Heater Circuit High Voltage Bank 2 Sensor 1
P0056 HO2S Heater Circuit Bank 2 Sensor 2
P0057 HO2S Heater Circuit Low Voltage Bank 2 Sensor 2
P0058 HO2S Heater Circuit High Voltage Bank 2 Sensor 2
P0100 MAF Sensor Ckt. Insufficient Activity
P0101 Mass Air Flow (MAF) Sensor Performance
P0102 Mass Air Flow (MAF) Sensor Circuit Low Frequency
P0103 Mass Air Flow (MAF) Sensor Circuit High Frequency
P0104 Mass Air Flow Circuit Intermittent
P0105 MAP Sensor Circuit Insufficient Activity
P0106 Manifold Absolute Pressure (MAP) System Performance
P0107 Manifold Absolute Pressure (MAP) Sensor Circuit Low Voltage
P0108 Manifold Absolute Pressure (MAP) Sensor Circuit High Voltage
P0109 Manifold Absolute Pressure Circuit Intermittent
P0110 Intake Air Temperature (IAT) Sensor Circuit
P0111 Intake Air Temperature (IAT) Sensor Performance
P0112 Intake Air Temperature (IAT) Sensor Circuit Low Voltage
P0113 Intake Air Temperature (IAT) Sensor Circuit High Voltage
P0114 Intake Air Temperature Circuit Intermittent
P0115 Engine Coolant Temperature (ECT) Sensor Circuit
P0116 Engine Coolant Temperature (ECT) Sensor Performance
P0117 Engine Coolant Temperature (ECT) Sensor Circuit Low Voltage
P0118 Engine Coolant Temperature (ECT) Sensor Circuit High Voltage
P0119 Engine Coolant Temperature Circuit Intermittent
P0120 Throttle Position System Performance
P0121 Throttle Position Sensor Circuit Insufficient Activity
P0122 Throttle Position (TP) Sensor Circuit Low Voltage
P0123 Throttle Position (TP) Sensor Circuit High Voltage
P0124 Throttle Position Sensor 1 Circuit Intermittent
P0125 Engine Coolant Temperature (ECT) Insufficient for Closed Loop Fuel Control
P0126 Insufficient Engine Coolant Temperature for Stable Operation
P0128 Coolant Thermostat
P0130 HO2S Circuit Closed Loop (CL) Performance Bank 1 Sensor 1
P0131 HO2S Circuit Low Voltage Bank 1 Sensor 1
P0132 HO2S Circuit High Voltage Bank 1 Sensor 1
P0133 HO2S Slow Response Bank 1 Sensor 1
P0134 HO2S Circuit Insufficient Activity Bank 1 Sensor 1
P0135 HO2S Heater Performance Bank 1 Sensor 1
P0136 HO2S Circuit Bank 1 Sensor 2
P0137 HO2S Circuit Low Voltage Bank 1 Sensor 2
P0138 HO2S Circuit High Voltage Bank 1 Sensor 2
P0139 HO2S Slow Response Bank 1 Sensor 2
P0140 HO2S Circuit Insufficient Activity Bank 1 Sensor 2
P0141 HO2S Heater Performance Bank 1 Sensor 2
P0142 HO2S Circuit Bank 1 Sensor 3
P0143 HO2S Circuit Low Voltage Bank 1 Sensor 3
P0144 HO2S Circuit High Voltage Bank 1 Sensor 3
P0145 HO2S Circuit Bank 1 Sensor 2 Slow Response
P0146 HO2S Circuit Insufficient Activity Bank 1 Sensor 3
P0147 HO2S Heater Performance Bank 1 Sensor 3
P0150 HO2S Circuit Closed Loop (CL) Performance Bank 2 Sensor 1
P0150 HO2S Circuit Bank 2 Sensor 1
P0151 HO2S Circuit Low Voltage Bank 2 Sensor 1
P0152 HO2S Circuit High Voltage Bank 2 Sensor 1
P0153 HO2S Slow Response Bank 2 Sensor 1
P0154 HO2S Circuit Insufficient Activity Bank 2 Sensor 1
P0155 HO2S Heater Performance Bank 2 Sensor 1
P0156 HO2S Circuit Bank 2 Sensor 2
P0157 HO2S Circuit Low Voltage Bank 2 Sensor 2
P0158 HO2S Circuit High Voltage Bank 2 Sensor 2
P0159 HO2S Slow Response Bank 2 Sensor 2
P0160 HO2S Circuit Insufficient Activity Bank 2 Sensor 2
P0161 HO2S Heater Performance Bank 2 Sensor 2
P0162 HO2S Circuit Bank 2 Sensor 3
P0163 HO2S Circuit Bank 2 Sensor 3 Low Voltage
P0164 HO2S Circuit Bank 2 Sensor 3 High Voltage


P




Dec 18, 2010 | 2005 Dodge Ram 2500 Truck

1 Answer

Honda trouble code P0134-P0135


I found the codes on a site for the EX model.

Indicates to me that the O2 sensor is in need of replacement.

P0134 O2 Sensor Circuit No Activity Detected - Bank 1 Sensor 1
P0135 O2 Sensor Heater Circuit - Bank 1 Sensor 1

Jul 05, 2010 | 2004 Honda CR-V

2 Answers

P0031, ho25circuit low, bank 1 sensor 1. sft b1 -3.91, ltft b1 .78, stft b2 -3.91, ltft b2 3.91. R&R ox sensor or what


Hello,
P0031 - Bank 1 Heated Oxygen Sensor No. 1 Heater Circuit - Low Voltage. That is what this code means.
DTC P0031 is set when Bank 1 HO2S No.1 heater current is less then .09 amps, or potential difference between heater positive and negative terminals is more then 13.99 volts while HO2S heater is on. MIL (The engine light) is illuminated when Engine Control Module (ECM) detects malfunction during 2 consecutive drive cycles.
Possible Causes are: - Bank 1 HO2S No. 1 heater circuit malfunction - Bank 1 HO2S No. 1 heater malfunction - ECM malfunction - HO2S heater relay

DTC Confirmation Test (Advanced/Intermediate Users): Ensure intake air tempature is 18f (-8c) or more, engine coolant tempature is 18-230f (-8-110c) and vehicle is at an altitude of 8000 feet or below, and barometric pressure is 75 kPa or more. Turn ignition off, connect scan tool and turn ignotion on. Using scan tool, clear DTCs. Start engine and run at idle speed for 5 minutes. Using scan tool check for current or pending DTC P0031.

Diagnosis & Repair Procedure (Advanced/Intermediate Users): 1. If engine system check has been performed, go to the next step. If engine system check has not been performed, do the system check.
2. Turn ignition off. Disconnect Bank 1 HO2S No. 1 4-pin harness connector. Bank 1 HO2S No. 1 is located in the left exhause pipe before catalytic convertor. Measure resistance between Bank 1 HO2S No. 1 pigtail connector terminal No. 3 (Green wire) and No. 4 (Blue wire). Resistance should be 5.0-6.4 ohms at 68f (20c). If resistance is as specified, go to next step. If resistence is not as specified, replace HO2S. After repair repeat DTC Confirmation Test (Above).
3. Disconnect HO2S heater relay. HO2S heater relay is located on the left fender well. Turn ignition On. Measure voltage between ground and HO2S heater relay socket cavity No. 3 (Black/White wire). Also measure voltage between ground and HO2S heater relay socket cavity No. 1 (Blue/White wire). If voltage readings at both measurements is 10-14 voltes, go to step 5. If voltage readings are not as specified go to next step.
4. Check for blown HO2S (15-amp) or IG COIL (20-amp) fuses. Fufses are located in the underhood fuse and relay boxc. If fuses are okay, check for open or short it to ground in Black/White wire between IG COIL fuse HO2S heater relay. If problem is found repair as necessary. After repair repeat DTC Confirmation Test (Above).
5. Turn Ignition off. Install HO2S heater relay. Dicsonnect ECM 30-pin harness connector C51-2. ECM is located under instrument panel, under glove box. Measure voltage between ground and ECM harness connector C51-2 terminal No. 4 (Green wire). If voltage reading is 10-14 volts, subsitute a known-good ECM, and repeat DTC Confirmation Test (Above). If DTC does not reset, testing is complete. If voltage readings are not specified, go to next step.
6. Check for short to ground in Green wire between Bank 1 HO2S No. 1 and ECM. If no problem with wiring is found, replace HO2S heater relay. If problem persists after repairs, subsitute a known-good ECM and repeat DTC Confirmation Test (Above).

I hope this helps and is what your looking for. Best of luck.

Nov 21, 2009 | 2003 Suzuki XL-7

1 Answer

95 gmc jimmy engine codes


9141 does not exist I will assume it is DTC P0141 HO2S Heater Performance Bank 1 Sensor 2

The VCM has the capability to monitor this process by using the Heated Oxygen Sensor (HO2S Bank 1, Sensor 2). The HO2S (Bank 1, Sensor 2), located in the exhaust stream before the catalytic converter, produces an output signal which indicates the storage capacity of the catalyst; this in turn indicates the catalysts ability to convert the exhaust emissions effectively. If the catalyst is functioning properly, the HO2S signal will be far less active than the signal produced by the Heated Oxygen Sensor (Bank 1, Sensor 1).
When the HO2S temperature measures below 360°C (600°F), the sensor will not produce any voltage and will behave like an open circuit. This will result in an Open Loop operation.
The HO2S heater provides for a faster sensor warm-up which allows the sensor to become active in a shorter period of time and remain active during long extended idle. The DTC P0141 determines if the HO2S is functioning properly by checking the response time of the sensor. This DTC is a type B DTC.

Dec 05, 2008 | 1995 GMC Jimmy

1 Answer

Trouble codes


P0108 - Manifold Absolute Pressure (MAP) Sensor Circuit High Voltage,
Possiable MAP sensor defective

P0134 - Heated Oxygen Sensor (HO2S) Circuit Insufficient Activity Bank 1 Sensor 1
P0141 - Heated Oxygen Sensor (HO2S) Heater Performance Bank 1 Sensor 2 , I recommend you replace both O2 sensors, bank 1 and bank 2

Oct 13, 2008 | 1996 Pontiac Grand Am

Not finding what you are looking for?
2007 Honda Ridgeline Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...