Question about 2003 Lexus SC 430
Replace bulb what else do you need
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The HID bulbs are very easy to change, and can be bought online for much less than from the dealer. Check sites like xenondepot and Ebay for Phillips D2R (for reflector headlamps) HID bulbs and you can replace them yourself.
Posted on Jun 06, 2009
replacing the headlights is easy. There is no need to adjust the afs, is is automatically done within the vehicle. Changing the bulbs doesn't affect the afs system at all.
Posted on Oct 08, 2009
move the drivers seat to the extreme of each position, then reset the memory. you should hear a beep when the memory resets. also make sure the headrest is all the way down.
Posted on Oct 25, 2009
Tips for a great answer:
Apr 16, 2017 | 2006 Chevrolet HHR
Jun 15, 2011 | Kia Amanti Cars & Trucks
Dec 12, 2010 | 2001 Buick Century
process for replacing tail light bulbs is the same in all models. If
you have a burnt-out tail light bulb, you may need to replace the
brake light, the reverse light or the turn signal. The procedure to
replace each of the bulbs is the same.
1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.
Remove the two screws from the tail light assembly. Pull the tail
light out and inspect the back for two bulbs. The top bulb is the
brake light and turn signal. The bottom bulb is the reverse bulb.
Determine which bulb you need to replace.
the tail light into its cradle. Hold it with one hand and replace
the Phillips head screws with the other.
Dec 03, 2010 | 2008 Hummer H3
Jul 08, 2009 | 2005 Cadillac Escalade Esv
Dec 31, 2008 | 2003 Honda Civic
44 people viewed this question
Usually answered in minutes!