Question about 1999 Chevrolet Cavalier
Replace head gasket
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Overheating could be a combo of many thing's.If your thermostat is stuck you will have no circulation which will cause overheating.Also if your eng. has alot of miles your water pump may be in need of replacement.Listen for your radiator fan motor and be sure that's working and also check to see if you radiator is good.If your loosing antifreeze because of a headgasket you will see a white cloud out of the exhuast because it is burning it and sometimes you also get a little in your eng.oil.Using a pressure tester on your coolant system will help to diognos the problem,if you have a leak some where it will not hold pressure.Sign,s of a bad waterpump are poor circulation and a antifreeze leak from a vent on the waterpump.Be sure the eng. is cool before working on it.Hope this was helpfull.
Posted on Mar 02, 2009
Well the biggest problems for the 98 and 99 cavaliers are that they mess up from the timing chain,..they make a rattling noise on the right side underneath the fender.
Posted on Jun 23, 2009
Drive it. Then have the rear abs brake sensors checked because they seem to be the first to go in a system like that. Someone with a scan tool should be able to read out any trouble codes in the abs system
Posted on Jul 08, 2009
The Intake Air Temperature (IAT) sensor determines the air temperature
inside the intake manifold. Resistance changes in response to the
ambient air temperature. The sensor has a negative temperature
coefficient. As the temperature of the sensor rises the resistance
across the sensor decreases. This provides a signal to the PCM
indicating the temperature of the incoming air charge. This sensor helps
the PCM to determine spark timing and air/fuel ratio. Information from
this sensor is added to the pressure sensor information to calculate the
air mass being sent to the cylinders. The IAT is a two wire sensor, a
5-volt reference signal is sent to the sensor and the signal return is
based upon the change in the measured resistance due to temperature.
Fig. 1: The IAT sensor is located in the air cleaner outlet tube-2.2L engine and 2.4L engine
Posted on Apr 11, 2010
Tips for a great answer:
Mar 08, 2017 | 2005 Chevrolet Cavalier
Oct 08, 2012 | 1999 Chevrolet Cavalier
Aug 06, 2012 | Cars & Trucks
Feb 25, 2012 | 1999 Chevrolet Cavalier
Sep 28, 2011 | 1999 Chevrolet Cavalier
May 17, 2010 | 2000 Chevrolet Cavalier
Jan 18, 2010 | 1999 Chevrolet Cavalier
Jan 14, 2010 | 1997 Chevrolet Cavalier
Apr 18, 2009 | 1999 Chevrolet Cavalier
Sep 03, 2008 | 1999 Chevrolet Cavalier
23 people viewed this question
Usually answered in minutes!