Question about 2007 Ford F-150 Harley Davidson

Open Question

P0012 and P0016

Error codes P0012 and P0016

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p0012


P0012 is a cam shaft error code.



Positioning over retarded bank 1.



You may be looking at a cam shaft sensor replacement, a wiring issue. Or worse, a mechanical fault.



I suggest getting the vehicle to a garage as soon as you can.

Feb 27, 2014 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

2005 f150 5.4 code p0016


EOBD II Error Code: P0016
Description:
Crankshaft Position (CKP)/Camshaft Position (CMP), Bank 1 Sensor A - Correlation
Indication:
Malfunction Indicator Lamp (MIL) ON.
Solutions:
Wiring.
Crankshaft position (CKP) sensor.
Camshaft position (CMP) sensor.
Mechanical fault.
Timing Issue.
Camshaft Adjuster.

Checks:
Check Setting of Timing Belt.
Check Timing of Intake/Exhaust Cams.
Check Cam Adjusters as per Repair Manual.

Nov 14, 2013 | 2004 Toyota Prius

1 Answer

Check Engine light on 2005 Toyota Echo, Code P0012


Error Code: P0012

Fault Location:

Camshaft Position (CMP), Intake/Left/Front, Bank 1 - Timing Over-Retarded


Possible Cause:

Valve timing.

Mechanical fault.

Camshaft position (CMP) actuator.

Intake Camshaft Adjuster tight/stuck.

Intake Camshaft Adjuster faulty.

Possible Solutions:

Check Intake Camshaft Adjuster.


Check valve timing.

Check the timing gears.

Sep 28, 2012 | 2005 Toyota ECHO

1 Answer

P0012


P0012 - "A" Camshaft Position - Timing Over-******** (Bank 1)
OBD-II DTC Trouble Code Description

"A" Camshaft Position - Timing Over-******** (Bank 1)
What does that mean?

A code P0012 refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car's PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0012 DTC specifically refers to the camshaft (cam) timing. In this case, if the cam timing is over-********, the engine light will be illluminated and the code will be set. The "A" camshaft is either the intake, left, or front camshaft.
Potential Symptoms

Most likely a P0012 DTC will result in one of the following:

hard starting
poor idle and/or
stalling

There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.
Causes

A P0012 DTC trouble code may be caused by one or more of the following:

Incorrect camshaft timing
Wiring problems (harness/wiring) in intake timing control valve control solenoid system
Continuous oil flow to VCT piston chamber
Failed timing valve control solenoid (stuck open)

Possible Solutions

The main thing to check is to verify the operation of the VCT solenoid. You're looking for a sticking or stuck VCt solenoid valve caused by contamination. Refer to vehicle specific repair manual to perform component tests for the VCT unit. Notes: Dealer techs have advanced tools and the ability to follow detailed troubleshooting steps, including the ability to test components using a scan tool.

Nov 26, 2011 | 2004 Ford F150

3 Answers

I have a f150 04 and the code p0012 came up fills like your on a bull when driving intake retarded bank 1 is what came up on the scanner


P0012 A Camshaft Position - Timing Over - Retarded (Bank 1 A P0012 DTC trouble code may be caused by one or more of the following:
  • Incorrect camshaft timing
  • Wiring problems (harness/wiring) in intake timing control valve control solenoid system
  • Continuous oil flow to VCT piston chamber
  • Failed timing valve control solenoid (stuck open)

Jun 13, 2011 | 2004 Ford F150

2 Answers

Ml350 replaced a/b cam position sensor reset computer & and erra codes p0016/p0016 check engine ligth is reset car drives with light off when engine is turn off and started the light goes out if you...


P0010....'A' Camshaft Position Actuator Circuit (Bank 1)

P0011....'A' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)

P0012....'A' Camshaft Position - Timing Over-Retarded (Bank 1)

P0013....'B' Camshaft Position - Actuator Circuit (Bank 1)

P0014....'B' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)

P0015....'B' Camshaft Position -Timing Over-Retarded (Bank 1)

P0020....'A' Camshaft Position Actuator Circuit (Bank 2)

P0021....'A' Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)

P0022....'A' Camshaft Position - Timing Over-Retarded (Bank 2)

P0023....'B' Camshaft Position - Actuator Circuit (Bank 2)

P0024....'B' Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)

P0025....'B' Camshaft Position - Timing Over-Retarded (Bank 2)

I think your sensors are pattern parts and the readings /resistances are not the same as the original parts ,try some bosch units is my first suggestion ,

Nov 02, 2010 | Mercedes-Benz ML350 Cars & Trucks

1 Answer

2006 Mustang GT 4.6L codes P0010,P0012,P0016,P0020,P0171, P0174


my mustang had problems after i put an exhaust on it. if this is the case for you go down under your car it has 2 sensors up high on each exhaust pipe get the size then go down to an auto parts store and get some spark plug reducers and screw your o2 sensors into them and back into your exhaust

Jun 08, 2009 | 2005 Lotus Elise

Not finding what you are looking for?
2007 Ford F-150 Harley Davidson Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...