Question about 2000 Ford Windstar

Open Question

Radiator Fan won't turn on 2000 ford Windstar

BUT my AC works fine? Aren't they connected? If not how do I find the correct fuse and relay. Buddy's dog ate my book :(
Not fun pulling over every few minutes to cool off and add more water.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 97 Answers

SOURCE: headphones,need ac adapter,dog ate wire from ac adapter to headhone

http://www.buylogitech.com/store/logius/en_US/DisplayCategoryProductListPage/categoryID.11201000

Logitech website.

Cheers

Posted on Apr 03, 2008

Ad
dustyboner
  • 331 Answers

SOURCE: 1996 windstar relay

The fuel pump power on the Windstar is controlled by a component called a Constant Control Relay Module (CCRM).
Its located located on the driver's side of the engine compartment.d7fb0ae.jpg

Posted on Oct 22, 2008

  • 98 Answers

SOURCE: adding ram to my averatec buddy net book

Thear will be some panels you can unscrew at the bottom of your laptop this will give you accses to the Hard drive and memory to upgrade.Your lay
out may be difrent.
9abc931.jpg

Posted on Jan 24, 2009

  • 1 Answer

SOURCE: i have a 2000 ford windstar no heat still

My 99 windstar did this too. It was the blend door that the actuator motor goes into was broke. When you pull the actuator out look into the hole and see if you see a d shape piece coming out of the box if it is not d shape it is broke check out this site great photos

Posted on Feb 28, 2009

King Cuervo
  • 14 Answers

SOURCE: 2000 ford windstar... electrical mess!!

one reason for that fuse to blow is a bad brake pressure switch on the master cylinder. could be a
warranty/recall item. can also leak brake fluid. also check behind each wheel for any sign of brake fluid,
particularly the rear wheels if you have rear drum brakes. fixed one here recently where the vehicle's jack
came loose in the right rear compartment and short that circuit. make sure your jack is stowed properly.

good luck

Posted on Jun 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan not working


check fuses & relay. Probably need workshop manual from local auto store to locate relay. Check earth connections coming off fan motor to body, are clean & tight.

Feb 16, 2013 | 2000 Ford Windstar

1 Answer

Rear blower only clicks when selecting any speed


CHECK YOUR HEATER RELAY SWITCH AND YOUR FUSES

Feb 14, 2013 | 2002 Ford Windstar Cargo

1 Answer

Cooling fan not working in my 2000 Dodge Durango. I checked the fuse ( its good) and replaced the cooling fan....still not spinning/working. HELP! This is my only car!


the fan have a relay, turn your AC on and check to see if it comes on your fan have 2 speed one is for temp and the other for AC.

Sep 18, 2012 | Cars & Trucks

1 Answer

Some electrical problem


Why don't you suspect the ignition switch ?

Aug 22, 2012 | 2000 Ford Windstar

3 Answers

My 2000 honda crv is overheating there are 2 fans and neither seems to come on


One fan should come on when the A/c is turn on. The other fan Will be the primary radiator cooling fan. This fan is controlled by a coolant temperature switch, a relay and fuse. Once the coolant temp, reaches 186 degs. the fan should come on. So you have to check the fuses for a burnt fuse, then you can check the coolant switch by un-pluging it and making a jump in the wiring with a paper clip and stick it into the connection. That should force the fan on. Hope this helps FixYa up.

Sep 03, 2011 | 2000 Honda CR-V

1 Answer

Radiator fan not operating could be fuse don't know how to change 1994 lancer


Look in your manual for fuse diagram LOOK FOR A RELAY, put a "RF" on top of the "Radiator Fan relay and find another with same part number. in the fuse compartment. ie Air Cond. put an "A C" on that one, switch them out and get engine HOT to see if fan works, turn AC on too if it works the relays are both good. next things to check [a] "Temperature switch" on block, or [b] corroded wire terminal at firewall connections [c] the fan motor could be bad ...... that Radiator fan operate TWO ways. (1) a hot engine (2) turn the AC on high will also turn it on. Check this first before U get your hands greasy.

Mar 20, 2011 | Mitsubishi Lancer Cars & Trucks

1 Answer

2004 Ford Focus overheating when ac is on. no leaks, fluids are fine too. ac isnt as cold as it used to be either.


sounds like your engine cooling fan is not working. it should come on when the AC is on. there is a relay that controls the radiator fan . It's a 5$ part at rockauto.com . check fuses first.

Sep 02, 2010 | Ford Focus Cars & Trucks

2 Answers

Radiator fan motor doesnt come. changed radiator fan motor and the checked fuse ;good! Turned the AC on and the motor still doesn't come on! Checked power at the fuse box but reads 2.5 volts dc to...


Make sure all your ground connections are good and clean. That includes the main one from the battery to the block, fender and block to firewall and several other smaller ones on the block. Make sure the connectors are clean and have power where it should be. You have a fan relay behind and below the rt headlamp. that is the primary one for the fan. Don't forget that there are connectors under the power distribution center. A good fuse connected to a bad connector won't work.

Jun 12, 2010 | 2000 Jeep Grand Cherokee

1 Answer

98 Mustang v6 - no AC


Make sure the radiator pressure cap is the correct one and that the hose is not soft--check the lower hose and heater hoses for softness as well. They should be firm, but not hard or cracking. The temperature sensor is reporting normal operating temperature, so it and the thermostat are working correctly (hot water would blow out of the radiator if it were stuck). Check the cooling fan for free turning and no noise. Check it's grounding connection. Check the fuse box for blown fuses to the fan and to the A/C compressor. Make sure all the relays and fuses are firmly pressed into their sockets. Check the A/C compressor clutch winding for resistance--should not read infinity. Does the blower motor for the heater/A/C run when either is turned on? The A/C switch on the dash may be defective.

Sep 08, 2009 | 1998 Ford Mustang

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...