Question about 2006 Toyota Camry

Open Question

The guidance voice does not working

Gps voice not working

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sat nav in my Audi 2001 A6 cant start route guidance because no satellites are detected


If it never picks up the sat signal then you have a defective GPS. Best to just replace it, the repair cost is equal to a new one.

Jul 22, 2016 | Audi Cars & Trucks

2 Answers

2007 XL7. Why doesn't the information center work?


XL7 not XL-7 (the dash matters big time)
i'll guess its a dash.7
REDUX
in your post you said fuses are good (tested too)
have you checked and reseated the connectors on the OBJECTS that fail>?? (that is free to do)

we now learn many things fail on car,
even HEAD LIGHTS?????
and no statement of what works. in total!
does car drive perfect night and day?????
just a clue here, and win big. huh>?

I can't drive your car and see all those many things failing,& that are. ok .. and what does not fail....

but this car has CAN-bus (or the like)
a NETWORK for sure, and bus structured.

and does not work like some 1990 Vitara.
at all, not even close to same. (forget them...)
it's a BUS system.
each switch you throw sends a command on the bus.
it's failing I bet because of communication errors
that you fail to see because you did not use a real scan tool at the time of failure.
it must be scanned while failing !

cant fix it if its not broke,...(unless you drive
scan and log data. like i do all the time for all intermittent of any kind....)



does it fail engine running?
is running battery voltage at 13.3 to 15vdc
if voltage is low all computers in car will go nuts. (same with your cell phone)
this is a fact and what i check first?
valid battery voltages first.
2nd after fuses, (done already)
then scan it. using a real scan tool
not some relic.
a real tool can see all CAN buss errors
U codes top the list.

P1,p2, p3 and B codes too.... all seen.
failing.

you can buy tools
rent tools
or get the car scanned failing at any ASE shop.
car parts store may have junky or relic tools.
(i can name 10 that are)
some tools only do old federal P0xxx codes. say some old 1996 tool.

try a real shop and win. really
http://www.ase.com/Landing-Pages/Car-Owners/Find-a-Repair-Shop/Shop-Locator.aspx

Sep 06, 2015 | Suzuki Cars & Trucks

1 Answer

2004 honda accord ex w/navigation lost guidance voice


It lost the voice and or the voice crackles... I had that same problem. Eventually the entire thing will go out. Check to see what brand CD/DVD drive is mounted in the trunk. Mine was Alpine. If yours is too here you go: Alpine Electronics of America, Inc.
(800) 421-2284 Ext.860304
or
(800) ALPINE-1 (1-800-257-4631)
I paid $150 and the entire thing was fixed. I uninstalled the unit that the DVD for the navigation is in then sent it out. I re-installed it and it worked like new. The dealer charges labor and JACKS up the price. Go directly through the maker!

Aug 05, 2012 | 2004 Honda Accord

2 Answers

WITSON DOUBLE-DIN DVD GPS NO AUDIO


This sounds like a setting found in the OPTIONS or SETTINGS portion of your MENU. As the "Safe Driving" banner implies, the voice has been muted. I use a TOM-TOM system which has voice adjusting capabilities. Most likely someone found the voice annoying and shut it down or someone did not want you to be distracted by the voice feature.

This is a little thing to fix and if you can not reprogram it, a BMW Dealer may do a Courtesy fix to build a Relationship with you.

I hope my solution is helpful.

Aug 05, 2012 | BMW Cars & Trucks

2 Answers

I have 2008 RX400h. How can I override the gps?


Not sure what you mean by over ride, but if you want to silence the little lady in the box with her annoying commands once a destination is set you can go back in to destinations and delete destination, or to silence her temporarily you can go into the menu/ info screen and you will see a "SUSPEND GUIDANCE" ICON .
Once you click on that icon "Naggy Maggie", will be silenced until you click again at the same location, but your destination will be saved however you will notice the option will now be reading "Resume Guidance"... wish I had the same buttons for my kids...

If on the other hand you simply want to reroute you can go into destinations and you will have options to EDIT ROUTE or ADD to route, etc
. Post back if you need more clarification..

Enjoy the car, great choice

Oct 06, 2009 | 2009 Lexus RX 350

1 Answer

Navi/Voice command problem


I have the exact same problem. If you have a solution can you please email kfillebay@shaw.ca. Thanks!!!

Aug 01, 2009 | 2004 Acura TL

1 Answer

I just upgraded to 2009 US maps and the GPS voice has worked once


I had the same problem. I had to have the dealer reload the GPS software once I got back to the states. It took two tries, but once actual GPS software was updated with the U.S. software version it worked find.

Jul 26, 2009 | 2006 Volvo XC90

1 Answer

My gps voice does not work.


I'am not familiar with your exact model year system. I do know that the voice recognition is fiber optically controlled among other command system functions. If you have sound and your c.d. player and phone work the system is working fiber optically. I think you have a bad microphone. Does your teleaid and roadside system work? They all use the same mic. Try calling roadside and see if they can hear you. The mic should be located in your over head compartment under the vent screen. They were a comman failure in previous models. I hope I have been helpful.

Jun 27, 2009 | 2007 Mercedes-Benz ML500

Not finding what you are looking for?
2006 Toyota Camry Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...