Question about 2005 Dodge Magnum SE
Checked all fuses both front & back none of them are blown, hiwever, not sure if any fuses are missing since I dont have a buyers manual. Replace wipers, blinkers & high beams but still not working can someone help me please??
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Obviously you have a connector which has come partially apart somewhere between the Headlights and the Headlight Switch. Most modern vehicles have several connectors between the Headlight Switch and the Headlights, Start at the Firewall Connector and work forward toward the Headlights making sure all connectors are securely mated. Another remote possibility is that you have fractured the "Low Beam Filaments" in BOTH Headlights. You don't mention how hard you hit the Speed Bump but if it caused the car to "Bottom Out" the front suspension it was a hard enough impact to fracture the filaments. You can use a 12 Volt Test Light at the Sockets for the Headlight Bulbs and see if you are getting 12 Volt power there. If you are in Low Beam position you have fractured the filaments. Check with High Beam too.
Posted on Nov 18, 2011
Do they all work off the same 'stalk' lever from the steering wheel?
Also, look in the Owner's Manual for where you FUSES are located.
Find those related to the issues you're having and check to see if they're blown/bad.
Posted on Aug 24, 2016
Tips for a great answer:
Aug 24, 2016 | Dodge Cars & Trucks
Jan 30, 2013 | 2005 Dodge Magnum
Nov 10, 2011 | 2005 Volvo XC70
Sep 16, 2009 | 2005 Dodge Magnum
Jul 16, 2009 | 2005 Chrysler 300
Jun 29, 2009 | 2005 Dodge Magnum
Jun 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: