Question about 2001 Opel Astra 2.2

Open Question

P0330 astra solutions for this problem

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Temperature just dropped only have 1 gal. antifreeze in .Book I have says a 7.5 1997 cooling system holds 23.6 qts.How much should I put in?

23 quarts is nearly 6 gallons which is a big cooling system so I guess it belongs to a commercial vehicle or PSV.

The minimum safe antifreeze solution is 25% but this gives only drive away protection for a few degrees of frost and the windchill factor can still freeze the radiator if the engine isn't thoroughly warmed before driving away.

Practically speaking a 33.3% solution is reckoned to provide the minimum protection as the coolant will turn to a semi-solid mush under very low temperatures and limit the possible expansion damage. It should be possible to start the engine. No freezing is likely to take place in most frosts experienced by the temperate regions.

A 50% solution is reckoned to be the minimum for good frost protection and makes best use of the antifreeze's anti-corrosion additives as well as providing a good summer coolant.

A 60% solution is reckoned to provide comprehensive protection.

Dec 18, 2016 | Cars & Trucks

1 Answer


I use this website all the time:

Now the art is knowing how to interpret, the P0320 and P0330 can set off your P0420 and P0430 oxygen sensor codes. I would address the P0320 and P0330 first and probably the O2 sensor stuff will probably go away. If your car is knocking, rough idle, loses power, etc. then the 300 codes make sense and you have issues. It could also be two separate issues were damaged wiring on the knock sensors and then a damaged catalytic converter. I've got a car that constantly throws up 420 and 430 codes because the catalytic converter got dinged up from running something other.

Apr 17, 2015 | 2006 Cadillac CTS

1 Answer

My problem is the same as montanas 2009. I wonder did anyone ever find a solution?

There are solutions to most everything

Most vehicle are designed & built for years,
with the same problems & no attempt to do otherwise.

The aftermarket has found solutions to pretty much everything

You told us nothing,so google the question, to find an answer,
try You Tube Video for the solution,ask a dealers service dept
to look up bulletins & ask a repair shop to do the same.

May 11, 2014 | Cars & Trucks

1 Answer

How do I find a solution that I previously provided.

Login to your account and click on your profile icon (avatar) on the right of the top menu. Click on "My Profile". Now in the new page you can click on "My Solutions" to see the solutions you had posted. There is also a possibility that you had just posted your own similar problem in response to the topic and since the website script does not know if it was a solution or not, it by default takes every reply to a topic as a probable solution. Not a good way to handle it but that is how it is now. I just found this out after I received a similar email and searched for the solution I might have posted years ago. Turns out even I had the same problem as the topic and I had just added my problem in the hope that someone might answer it. No response in over a year though.

Apr 28, 2014 | Cars & Trucks

1 Answer

My health fryer turns on and goes round but the halogen bulb doesn't come on??? Do I need a new bulb???

Why dont you reward your body !

Isagenix Consultant
The Isagenix Wealth Creation solution
Cleanse for Life
The Isagenix Weight Loss Solution
The Isagenix Wealth Creation solution The Isagenix Weight Loss Solution

Apr 07, 2014 | Cars & Trucks

1 Answer

P0330 and p1130

I wonder if these two codes are related. P0330 could be due to a bad Knock Sensor which might affect the timing thereby causing issues with air/fuel ratio i.e. P1130

Nov 12, 2013 | 2001 Lexus RX 300

2 Answers

I have an 02 jeep liberty stalls after warm and is throwing multiple knock sensor codes p0325, p0330 help

P0325, P0330 are both knock sensor codes that are detected by your ECU. Considering that you are showing both codes indicates that your model trim level is either "Limited" or "Renegade" that will have a knock sensor for 2 banks (V6). Knock sensor errors will change the timing of your engine ignition and can lead to a drop in performance or worse, lead to engine stalling in order to save other components of your engine.
The common solution to remove knock sensor codes is to have the sensors replaced by an authorized mechanic; sometimes shorted electrical leads to the sensors are also a cause for the codes. Replacing the knock sensors will remove the prompting of P0325, P0330 and expect to find another fault as engine stalling is not always present with knock sensor error codes.
Hope this helps.

Nov 05, 2013 | Cars & Trucks

1 Answer

Code p0330 knock sensor does this affect the way it shifts if engine light is on

Possible but unlikely. Code p0330 refers to knock sensor(KS) 2 bank 2-circuit malfunction==causes --wiring --KS--ECM. Replace the KS. The engine light is telling you that there is a problem with sensors in the ECM and that is what will be affecting the performance . Shifting is the area of the TCM( transmission control module ) so have that checked out as well

Oct 26, 2013 | 1999 Lexus RX 300

Not finding what you are looking for?
2001 Opel Astra 2.2 Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Brad Brown

Level 3 Expert

15557 Answers

george parkes

Level 3 Expert

975 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides