Question about 2010 Audi S4

Open Question

Change low beam bulb - 2010 Audi S4

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE NO LOW BEAM RIGHT SIDE FRONT CHANGED BULB HIGH BEAM IS OK BUT STILL NO LOW BEAM


thats what it sounds like first place to check is the plug to see if its burnt the contacts

Sep 30, 2012 | Cars & Trucks

1 Answer

Both high beams do not work, but low beams do.


Need new lightbulbs. Lowbeam will still work evan after highbeam elament is burnedout in bulb. If separate bulbs are used for high and low beam,then change high beam bulbs only. If does not fix then check fuse or wires and make sure plug to bulb is in correct position. But probably just need new bulbs.

Oct 22, 2011 | 2005 Honda Pilot

2 Answers

2008 gmc truck Low beams quit working. I have High beams and running lights only. whats possible fix?


Are the bulbs good?

If your low and high beams are on the same bulb, then the low beam elements have blown even though the high beam still works, you need two new bulbs.

Apr 04, 2011 | 2008 GMC Sierra 1500 2WD

2 Answers

No headlights only high beams


Both the low beam bulbs must be defective.
People at Jiffylube change headlight bulbs while you wait, if you are not up to the task.

Dec 02, 2010 | 2002 Chevrolet Impala

1 Answer

Low beam burnt out


The headlight on an 03 baja are a double element bulb for high an low beam. I replaced mine with 9007 bulb from auto parts store. Be careful to pay attention to bulb position, they can be installed up side down having the high beam as your low beam. I would shine the lights up against a wall or garage door and flip your high and low beams on and off to see how the shine.

Feb 21, 2010 | 2003 Subaru Baja

1 Answer

How to change front headlamp bulb? Low beam


  1. Open the hood.
  2. Remove Grille.
  3. Remove the 2 retainers on back of headlamp assembly and remove the headlamp from the sheet metal panel.
  4. Remove the access cover from the rear of the headlamp.
  5. Disconnect the electrical connector from the socket.
  6. Rotate the bulb and socket counter clockwise in order to remove the bulb and socket from the housing.
  7. Disconnect the electrical connector from the socket.
  8. Remove the bulb and socket from the headlamp.
Installation Procedure Important: • Replace a high beam bulb with another high beam bulb. The high beam bulb has a black socket. • Replace a low beam bulb with another low beam bulb. The low beam bulb has a gray tip and a grey socket.

Oct 14, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

2008 gmc acadia low beam light bulb changing


how do you change the low beam light bulb on the 2008 gmc acadia

Feb 24, 2009 | 2007 GMC Acadia SLE

2 Answers

Low beams do not work but High beams do


Yes you are... but only the bad onemake sure must be carefully when you take out the old bulbs. take this with you to the spare part..ask the store for the same type...and some times you must say to them type and brand of your car.
when you install new bulbs remember don't touch the glass area 'cause can make light not bright...good luck

Jan 30, 2009 | 2006 Mazda 3

Not finding what you are looking for?
2010 Audi S4 Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14185 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...