Question about 2007 Ford Fusion V6
Charge your battery, clean your terminals and see what happens. If you don't have a charger, clean the terminals and try jumping it again. Make sure you have quality jumper cables.
Posted on Apr 01, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try over riding the starter relay on the fender ,it has one there right?. dont go to a mechanic yet. the engine aint seized. if it doesnt have this relay then i would get the alternator tested. if you want to test it yourself it can be costly for the right equip. autozone usually tests for free. i dont know were you live so if theres not an autozone. let me know if you cant get it tested.
Posted on Mar 27, 2009
Sounds like connections or cables. They may appear to look good but if they are aftermarket terminal ends they get corrosion under the bolt down clamp that holds the wires in. If they are factory cables that are molded on to the ends of the wires the same thing can happen. The easiest and cheapest thing to try is to put aftermarket terminal ends on the cables. Make sure you wirebrush the ends of the cables after you strip them and tighten them evenly and securely. Also clean the battery side thoroughly. If this doesn't work check the starter relay. Its the first place the red cable bolts to after the battery. Check the connections and try putting a jumper wire between the battery positive cable and the small terminal marked with an "S". One of these solutions should take care of this.
Posted on Nov 26, 2008
HI, I'm reading your problem,
Let me explain something about your car.
2005 Ford Taurus, The key on that car has Chip inside of the key and receiver on the ignition switch,
Check if the key you are trying to use is Black and has a plastic head.
If not you need a key with that characteristics.
But if you have the right key, Remenber if you had drop on the floor, or hit with something,
Because some times they come damaged, with insignificat thins.
Remenber if you left the key close to a magnets like speakers.
If nothing aply at your case, you need to call a place Aloha Smith, they have the computer to program or reprogarm your key. IF not you can't start your car.
OK.. I hope this information work for you.
Thank's for submit yous question on fixya.com
Posted on Jul 10, 2008
Main fuse or fusible link blown? What led to the need for replacement batteryand jump any symptoms?
Posted on Apr 25, 2009
You have a bad ABS module. Had the same problem with my 2000 Taurus. The ABS module is a Bosch 5.3 You can have yours rebuilt for $170 or go to a junk yard and pull one from a 2000-2003 Taurus. Make sure its a traction control module if you have it on your car!
Posted on May 28, 2009
Tips for a great answer:
Mar 31, 2015 | 2005 Hyundai Accent
May 22, 2014 | Hyundai Santa Fe Cars & Trucks
Jun 25, 2012 | 2003 Dodge Caravan
Dec 01, 2017 | 2002 Nissan Altima
Feb 15, 2010 | 2000 Chrysler Grand Voyager
May 05, 2009 | 2002 Chevrolet TrailBlazer
May 03, 2009 | 1998 Volvo S70
Jun 13, 2014 | 2007 Ford Fusion V6
151 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: