Question about 2008 Hummer H2

1 Answer

How do you know when to do a brake job on a hummer h2

How to determine when to replace the brakes

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

There are wear indicators on the pads that squeal when you apply the brakes. You could look through the wheel and look to see if the rotor is smooth and groove free.
The best way is to remove the wheels and visually check to see how much of the brake pad is left. If you are down to a 1/8 to 3/16th of an inch I would replace the pads.

Posted on Apr 01, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2004 hummer h2 leaks water from roof over front

Seal all the lights on top. Mine flooded from the water running down the light harness wires. Used clear rtv sealant and fixed it. You will have to remove the seal the two larger lights on the corners.

Posted on Jul 06, 2009

  • 7 Answers

SOURCE: headlight replacement

Open the hood, Turn the twist lock sleeve the surrounds the wiring harness end and pull out bulb holder. Pull out old bulb, press new bulb tab into slot, replace unit back into light housing, turn twist lock sleeve to secure to housing.

Dont touch the new bulb with your bare fingers.

Skin oils can heat up on the bulb and cause it to fail.

Posted on Aug 22, 2009

abdoush
  • 12 Answers

SOURCE: change light on 2006 hummer h2

it can be easily changed by removing the plastic cover then u will see the light bulb, don't try to change it from the back, it wont open :)

Posted on Sep 08, 2009

abdoush
  • 12 Answers

SOURCE: top speed of h2 hummer

it's a heavy car, so the H2 does 0-60 in 8.2 seconds.
and Max speed is 100 Mph

Posted on Sep 08, 2009

  • 1 Answer

SOURCE: 2006 H2 Hummer Rear Door Hatch

is the child lock on?

Posted on Jun 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Hummer H2 stuck in park. It will start but I can not move the shifter.


usually have to push brake down to get out of park .

Oct 13, 2015 | 2006 Hummer H2

1 Answer

Brake lights signals not working


If the tail light goes out when the brake light goes on, you have a bad ground.

Apr 12, 2014 | 2006 Hummer H2

1 Answer

How do I replace brake switch on a 2004 Hummer H2?


The break switch is located on a bracket behind the break pedal. Find it,take out and replace with new. It should only be one screw.

Dec 17, 2013 | 2003 Hummer H2

1 Answer

I drive a 2005 hummer h2. Lately my brakes have been harder harder to engage. I push the peddle and usually i dont have to apply that much pressure to stop. I have had my brakes replace with top of the...


  • Most commonly a stuck brake bad will cause the hydraulic fluid to boil and expend and then the brake pedal won't hardly move.
  • But all considering you need to replace the brake booster.
  • This is not a DIY "project. I will link you to where one is though so you can see what it looks like. http://www.partstrain.com/ShopByDepartment/Brake_Booster/HUMMER/H2/2005
  • Traditionally a bad master cylinder will give a spongy feeling to the brake pedal.

  • Hope this helps and thank you for using FixYa

Regards, Tony

Jul 25, 2011 | 2003 Hummer H2

1 Answer

Washed the vehicle Fri. It sat in the garage over the weekend. Temp outside is in the high 20. When I baked out this morning my brake pedal was so hard to push and I had no power steering. 2003 h2 hummer


Did you wash the engine too? any way the only reason the brake/power steering goes hard is due to either brake booster not working or P steering belt coming off OR the vehicle shuts off momenterly. Check to see if the brake fluid is at level.

Feb 28, 2011 | 2003 Hummer H2

1 Answer

Power steering and brakes do not work when I returned from vacation


RECALL: 2003-2004 Hummer H2 NHTSA Campaign Number: 04V045000

www.nhtsa.dot.gov
Manufacturer GENERAL MOTORS CORP. Recall Date: 02/04/2004 Potential Number Of Units Affected: 68,875 Description SERVICE BRAKES, HYDRAULIC Summary CERTAIN SPORT UTILITY VEHICLES, PICKUP TRUCKS, AND PASSENGER VANS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, ?PASSENGER CAR BRAKE SYSTEMS.? SOME OF THESE VEHICLES WERE PRODUCED WITH AN OUT-OF-SPECIFICATION BRAKE HYDRO-BOOST HOUSING RELIEF VALVE BORE. Consequence CONSEQUENTLY, THE VALVE O-RING SEAL MAY FRACTURE. STEERING EFFORTS MAY BE SLIGHTLY INCREASED WHILE BRAKING OR PARKING. UNDER CERTAIN DRIVING CONDITIONS, A FRACTURED SEAL MAY REQUIRE A SLIGHT INCREASE IN THE APPLIED BRAKE PEDAL EFFORT TO ACHIEVE THE SAME VEHICLE DECELERATION RATE AS PRIOR TO THE SEAT FRACTURE. Remedy DEALERS ARE TO REPLACE THE HYDRO-BOOST RELIEF VALVE. THE RECALL BEGAN ON APRIL 26, 2004. OWNERS SHOULD CONTACT CADILLAC AT 1-866-982-2339; CHEVROLET AT 1-800-630-2438; GMC AT 1-866-996-9463; OR HUMMER AT 1-866-486-6376.

Jan 03, 2011 | 2003 Hummer H2

2 Answers

I have hardly any brakes and no power steering. Any ideas?


THE POWER STEERING PUMP ON MOST OF THE LIGHT TRUCKS ANY MORE ALSO RUN THE POWER BRAKES, CHECK TO SEE IF YOU HAVE POWER STEERING LINES GOING TO AND COMING FROM THE BACK OF THE MASTER CYLINDER AREA. THATS THE HYDROBOOST ACTUATOR. REPLACE THE P/S PUMP AND FLUSH ALL THE LINES

Dec 27, 2010 | 2004 Hummer H2

2 Answers

MY 2004 H2 Hummer is in park... I can start it but no matter what I do I cant get it out of park??? any Idea's


Do your brake lights work? It might be the brake switch or the shift interlock solenoid.

Jun 08, 2009 | 2003 Hummer H2

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7727 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...