Question about 2004 Jeep Grand Cherokee

1 Answer

Code 13 Check engine light on

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

2004 Jeep? grand Cherokee?
why 2 digits?, where did you see that? very odd that.
are you posting to year 2004 in error?
do post car brand model, GC.
and post year, post engine option (size)

beg,barrow, rent or get loaned (many stores loan it) or ask you mech.
to scan the PCM. (watch out for poor shops with ratty tools)

any scan tool that has JEEP factory code support works best.
one of the best is INNOVA 3160

or drive to any auto repair shop. and ask them to scan car
many will do it for free, as good faith and easy way to get work.

jeeps 1996 to 2000 any scan tool works
93-95 year needs a special OBD1 jeep scan tool , $150?
old that 1993 , only very expensive dealer type tools work. DRB1 or 2.

the operators guide in the glove box, says what to do .
did you lose that?

Posted on Apr 01, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the 2012 kia forte engine light turn on?


Engine Light Is On: 2010-2013 Kia Forte - What to Do - 2010 ...

www.carcarekiosk.com/...Kia_Forte_EX...engine_light/diagnose
A check engine light can indicate a broad spectrum of problems with your 2010 Kia Forte. ... The video above shows how to locate the on board diagnostics (OBD) plug on your 2010 Forte, how to read the trouble codes and how to reset or clear the checkengine light using a scanner on ...

KIA Check Engine Light (CEL) Codes - Kia Forte Forum : Sedan ...

www.forteforums.com/.../11832-kia-check-engine-light-cel-codes.html

May 20, 2012 - 15 posts - ‎8 authors
Old 05-19-2012, 08:42 PM Thread Starter. SketchedOut ... KIA Check Engine Light(CEL) Codes ... P0115 Engine Coolant Temperature Circuit Malfunction. 2012 Forte Koup: Check Engine light
13 posts
Jun 29, 2015
Automatic Transmission Shifting Harder Than Usual
13 posts
Apr 27, 2014
Check Engine Light + P200A code on new 2011 SX
15 posts
Jun 7, 2011
Oil filter caused check engine light?

Jul 05, 2014 | 2011 Kia Forte

1 Answer

I have a 92 Lexus LS 400 I had a code 13 but I fix that but the engine light is still on what do I do?


Chances are the problem causing the code to be set is still there.
If the problem is fixed, and you clear the code, it should not come back.
Code 13 should be a loss of RPM signal which could be a cam sensor or something else.

Feb 22, 2014 | Cars & Trucks

1 Answer

Code engine lights flash 1 25 13 55


Please give year, make, and model, as well as double check flashes after key turned on, off,on, off, and on and leave it on. No such code as 1, but 13 is Map sensor related, and 25 is Air idle speed motor related. 55 is end of message.

Aug 07, 2011 | Plymouth Grand Voyager Cars & Trucks

2 Answers

Error codes for 1991 dodge spirit


Turn the key to run then off, back to run, then off, then to run and leave it on. The check engine light will be on and will then go off and then on again according to the codes the engine controler happens to have in it. If the check engine light was on when you stopped the car, then there is at least one code in the controler. The light will blink the codes like this.
Cycle the key three times and leave on on the third time. light on for about 3-4 seconds then goes out for about 2 seconds and then blinks one time and goes out for 3 seconds this is for the no.1. Then the light blinks 3 times and goes out for about 3-4 seconds. You have the code 13. You could have a whole string of codes in the controler memory. It could be something like this. key cycled 3 times, light on for 3-4 seconds, then blinks 1 time, pause, 3 times, longer pause, 2 times ,pause 4 times, longer pause, then 5 times, pause 5 times the goes out.
This is code ; 13,24, 55. code 55 isn't really a code. It just tells you it's the end of any codes the controller has.
If you disconnect the battery and hook it back, you will have code 13 which simply mean 'battery disconnect'. It will errace it's self after several starts if it's not disconnected again. If you cycle the key and you get 55, this means there are no codes recorded at this time.
You will allways get 55 when checking for codes wheather there are fault codes or not. The light on for a few second before the codes start flashing is only a bulb check. Some codes like 13 will not turn the check engine on, but but will leave a code for diagnostic purposes only. If you have the check engine light on and accellerate and the light begains to blink, then the controller is telling you that you have an engine miss and are running the chance of burning out you're catalatic converter if you continue driving. Sometimes its advised to disconnect the battery after you have recorded the codes.
This will erase all codes that are present but were generated by conditions that aren't pertanent to the present condition. and then the codes that come back are the real ones to address.
This link: http://minimopar.knizefamily.net/fault/index.html
Contains the entire list of Chrysler Engine Error Codes.


Mar 03, 2011 | 1991 Dodge Spirit

1 Answer

My 94 jeep loaps and then backfires out the tail pipe can you solve


Power train control module controls the drivetrain. If you can get a code from the computer it would go a long way diagnosing wether its an engine malfunction or computer issue. To get the codes bring a pen & piece of paper out to the car, turn the key to the run position (not start but when all the dash lights come on) then off then run then off then run (three times in the on position, after you have turned the ke on then off 3 times on then leave the key in the on position and watch the check engine light. It will flash a code to you for example check engine light turns on then off 1 time with a long pause then the light flashes three times then another pause this would be the #13 code , most start with this code to tell you that it is checking codes. Just count the # of flashes (from the check engine light) & that is the first # of the code it will pause then flash again & that is the second # of the code. Flash 5 times pause then 5 more flashes is the # 55, & that is the last code you get to indicate all codes have been displayed, so key on then off then on then off then on & watch the check engine light count the flashes write down that # when it pauses then count the next number of flashes until the pause & that is your trouble cod they are 2 # codes & usually 13 is the first code flashed & the # 55 is the code that lets you know it is done, all the 2 digit codes in between are trouble codes & can be found in a chiltons or haynes service manual or search the web for chrysler trouble or computer codes.

Sep 23, 2010 | Jeep Cherokee Cars & Trucks

1 Answer

Check engine light comes on only sometimes and it on off again is there a code now or dose it have to stay on


No you should be able to pull it. You only need a paper clip to pull it of that
Finder the connector in this picture under the driver side of the dash. With the key in the on position but the engine NOT running put the paper clip in the A and B slot (top 2).
Now the code will blink through the engine light. The first code will be 13. 1 flash STOP and 3 flashs then STOP. It will do that 3 times. After nujmber 13 that will be the problem code.
Come back and post and I will help more.

http://www.2carpros.com/forum/automotive_pictures/62217_GM_DLC95_Older_17.jpg

Mar 29, 2009 | 1993 Chevrolet K1500

1 Answer

1994 Sonoma service engine soon. Code 13?


Actually codes are specific to vehicles, you will need to bring it into a shop and have it checked. Any time a "Service Engine Soon" light comes on, you have and emissions problem, and it will not pass inspection

Jan 20, 2009 | 1994 GMC Sonoma

1 Answer

Trouble code 13, 1990 Subaru Justy


cmp sensor(camshaft position sensor)check the wiring harness first.to see if its loose if not then it needs replaced thats what trouble code 13 list.

Nov 13, 2008 | 1990 Subaru Justy

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...