Question about 1999 Jeep Grand Cherokee

1 Answer

Fan rotation The blades do not rotate. the 40 amp fuse is fine.

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

AC or Engine ? If engine it may be the engine coolant temp. Fan switch. Its either located on. Lower radiator or thermost housing. If you can unplug the wire at sensor and ground the wire. If fan runs you need to replace sensor.

Posted on Aug 12, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 grand marquis not getting power across relays for fuel pump. changed pump, relay, and computer. still nothing


Check fuses #1 #2 #9 #10 #11 #12 in the battery junction box under the hood to make sure they are good

2001-grand-marquis-not-getting-power-0mjk1nw4aqo52z33ebnvxua0-3-0.gif Check fuse #8 in the central fuse box inside the car

2001-grand-marquis-not-getting-power-0mjk1nw4aqo52z33ebnvxua0-3-1.gif

Feb 14, 2016 | 2001 Mercury Grand Marquis LS

1 Answer

Maza 323 radiator fan rotating direction


the direction of fan rotation will be on the motor body but check that th curved edge ( leading edge) of the fan blade is facing the radiator and that air is being pulled through th radiator. THe motors are dc operation and can spin in both directions and the fans themselves are made to fit in front of the radiator( a/c fan) and blow air through the radiator. So checking these points is necessary

Jan 19, 2013 | Mazda 323 Cars & Trucks

1 Answer

Replacing fan belt?what tools are required?


Instructions

Things You'll Need
3/8-inch drive breaker bar
Metric sockets
Serpentine belt

1 Open the hood and inspect the flat surface on top of the plastic fan shroud for the belt routing diagram. Follow the diagram instructions to route the new belt.

2 Locate the serpentine belt self-adjusting tensioner on the front of the engine block. The tensioner has a pulley on the bottom of the tensioner arm, which the belt travels under. The tensioner can only be rotated from the bolt that secures the pulley to the tensioner arm.

3 Rotate the tensioner in a clockwise motion with a metric socket and the breaker bar to loosen the tension from the belt. Then, pull the belt off the top of the tensioner pulley. Release the tensioner pulley and pull the breaker bar off the pulley bolt.

4 Pull the belt out of the accessory pulleys. Then, slide the belt around each fan blade and out of the engine bay. Rotate each fan blade to the top side of the engine to get the belt around each fan blade.

5 Match both the new belt and the old belt together to make sure that the new belt is the correct size. Then, route the new belt around each fan blade and around the crankshaft pulley. The crankshaft pulley is the big pulley at the very bottom of the engine.

6 Follow the routing directions from the belt routing diagram to install the new belt around the other accessory pulleys. Once the belt has been routed around all of the pulleys, look over the belt and make sure that it is secure inside all of the pulleys.

7 Crank the 1998 Dodge Caravan and let the motor run for about 15 seconds. This will finish seating the ridges of the new belt into the grooves of each accessory pulley.

8 Shut the motor off and close the hood.

Jul 07, 2011 | 1998 Dodge Caravan

1 Answer

NEED TO REPLACE THE HEATER FAN IN A 2003 BUICK LASABRE. PLEASE ADVISE IF FAN BLADE CAN BE REPLACED OR DO I NEED TO REPLACE THE ENTIRE BLOWER MOTOR & FAN? THIS IS THE INTERIOR FAN FOR HEATER AND AC.


the fan "blade" is a tubular rotating device that looks like a mouse treadmill. it can't go bad. if it is binding, free it. it is almost certainly the motor which will probably come with a new fan cage.

Aug 30, 2010 | 2003 Buick LeSabre

2 Answers

My 1993 ford taurus's wipers work part of the time. You can hear the relay click. but when they do work, the motor is fine. delay works and all.


Check if the wiper fuse is loose in the fuse box. Take it out and reinsert it. If it is still loose, take a small short piece of wire and insert it with the fuse to make in tight in its fuse slot.

Aug 18, 2010 | 1993 Ford Taurus

2 Answers

AC fan won't run . No air coming out at all. Also heater won't run.


First check the fuse for the fan. If it makes a humming sound, check if the fan blades have jammed somewhere and being physically stopped, it creates a humming sound.Also check the insulation of fan armature to see if an of the coils have shorted out. Also dont forget to check the condenser/capacitor which initiates the rotation of the fan................sodeep

Sep 04, 2009 | 2000 Dodge Caravan

1 Answer

Temperature light is flashing red, coolant is


fan relay is under the frame on the left by the fans. but most likely the fans themselves have gone bad check the fuse panel on top of the battery see if it is burned or blown fuse this is caused by the fans going from stop to high speed to many times. you will flat 40 or 50 amp flat blade fuse and both fans sorry for bad news

Sep 01, 2009 | 2001 Volkswagen Beetle

2 Answers

Can I use a clockwise rotation Fan Clutch in place of a counter clockwise fan clutch , What are the differance and what can it hurt,,.


u can if you have the blade to go with it, cooling fan blades either push or pull but not both.

Jul 07, 2009 | 1999 BMW 323 Series

4 Answers

Not sure what fan to buy!!


are you talking about switching to electric fans? or a standard fan that will run all the time?

Feb 27, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

97 Gmc Savana,6.5 turbo diesel vacuum pump not rotating


If the pump is not rotating all the time then it's due for replacement. They are not supposed to stop while engine is running. 227K miles is a lot of miles for any engine component.

May 18, 2008 | 2007 GMC Savanna

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...