Question about 2011 Dodge Grand Caravan

Open Question

P0340 I dont know where to start this diag

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Crankshaft and camshaft position sensors where are they on a nissan micra 2004 (k12) 1.2 petrol engine? (that may relate to codes p0011 and p0340)

at info that cover everything from wiring diagrams, electrical diag, fault/error codes, troubleshooting, service/repair/operation/maintenance info, PCV, etc.
that'll be all you need, without doubt.

Apr 11, 2018 | Nissan Cars & Trucks

1 Answer

2009 dodge journey wiring diagram

Your local library subscribes to Haynes and Chilton's online service manuals. You can get all the information and procedures you want there for free!

Aug 15, 2014 | 2009 Dodge Journey SXT

1 Answer

P0340 code

Had the same code but it turned out to be one of the coils. Cam sensor was ok

May 01, 2014 | 1998 Cadillac Eldorado

1 Answer

Getting p0340 - replaced camshaft position sensor - still getting p0340 - checked wiring connector there is 5 volts on the connector - still getting p0340 and won't start. any suggestions?

The ECM is the next thing to check for this problem. You will need to know what voltage should be at the connector to determine the fault is in the ECM

Oct 12, 2013 | 2004 Chrysler Pacifica

1 Answer

P0340 nissan navara2010

Take the battery cable of for a wile and let it re boot put it back on and see it clears and it stays off. Some times just clearing it with the computer dont clear it from the source

Feb 27, 2013 | Nissan Frontier Cars & Trucks

1 Answer

I have a 05 Dodge ram 1500 90,000mi. and it start to bog and eng.light came on my codes were p0129-p0405-p0340-p0868 and pending codes were p0129-p0325-p0330-p0405-p0340. I had put a new map sensor in...

P0340 is for camshaft position sensor circuit malfunction so the problem can be in you hav already changed sensor, then you need to check wiring from sensor to ecu and if the wires are ok than check the ecu! It can be either of them cousing the problem.

Jan 30, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

I have a ford mondeo 2001 and the engin light has come on and stayed on but dont know why.

You need to have computer diag. done, light means that the computer, pick up a bad signal from one of your engine sensors, most auto parts or Autozone will do this for free, get back with us with the trouble code number, and we will help you diag. your trouble code.

Sep 01, 2010 | Ford GT Cars & Trucks

1 Answer

2002 Mits Galant has a hard time to start

Your P0340 is a different problem from your P0303, but they may be related.

Since the code P0340 indicates that there is something wrong with your cam speed sensor, your misfiring in cyl3 may be caused by this.

This points to addressing the P0340 error before the P0303 since it could be contributing to the 303 in the first place. Look at your cam speed sensor in cyl3 and maybe this would solve both problems at once.

Hope this helps.

Jun 30, 2009 | 2002 Mitsubishi Galant

1 Answer

Error Codes P1684 and P0340

Camshaft position sensor circuit
  • Most likely cause : Camshaft position sensor failed.
means the battery was disconnected(or had been drained to a low voltage) recently.

Jul 22, 2008 | 2001 Dodge Stratus

1 Answer

Trouble codes P0340, P0622, P1388

OK.. HI.

The codes you have they refer to:
P0340. No cam signal at the PCM
P0622. Generator field not switching properly. " Charging system"
P1388. Auto shutdown relay control circuit.

"" P0340" This code , cam sensor make the car long start or not start, conditions.

Jun 29, 2008 | 2000 Jeep Cherokee

Not finding what you are looking for?
2011 Dodge Grand Caravan Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides