Question about GMC Sierra
When it wont crank radio and headlights go dim cleaned batt cables on batt end no change
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
that has a votec engine in it the fuel pressure is droping at knight and it takes 60 psi before the injectors will fire most likely cause fuel pump ,leaking injector ,or a feul pressure regulator
Posted on Jul 14, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Remove the clips and screws securing the old window to the arm and slide it out through the top of the door (may need to be maneuvered out)
Posted on Sep 11, 2009
Just maybe it's mechanical.Internal to the steering column is an activator rod that manually makes the contact in the ignition switch.It's the cast piece that is molded to the activator rod that breaks.Two things you can do;tilt the steering wheel all the way up and try again to start(the cast piece spreads before it breaks,by tilting you gain a little extra throw on the switch).This will only work a couple times before complete failure of the casting.The other is to move the cover that's just below the tilt lever enough to get to the rod and move it with a pliers to start.If it's mechanical these things do work,I ran my truck with a vice grip for a couple weeks until I could get the parts for the repair,but replacing the broken part is smarter and won't scratch up your column like mine.
Posted on Dec 13, 2009
Check coolant level. Check for heat at the heater hose going from water pump to heater core at firewall. Check to see that cable is moving coolant control valve from the closed to open position. Low mileage so it shouldn't be plugged heater core.
Posted on Jan 07, 2010
Testimonial: "You were absolutely correct. Low coolant level. Put in some 50/50 and we're nice and toasty now, but need to find out why coolant was so low. Thanks."
Tips for a great answer:
Feb 04, 2016 | 1997 GMC Sierra
Jan 25, 2016 | GMC Cars & Trucks
Jan 01, 2016 | 2002 GMC Sierra 1500
Jan 27, 2013 | 2003 GMC Sierra 1500
Jan 23, 2013 | 2008 GMC Sierra 1500
May 05, 2017 | 1997 GMC Sierra
Jan 29, 2011 | 1997 GMC Sierra
Jan 12, 2011 | 2003 GMC Sierra 1500
Feb 06, 2010 | 1997 GMC Sierra
Dec 28, 2009 | 2002 GMC Sierra 1500
60 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: