Question about 2010 Peugeot Bipper Teepe

Open Question

How do you remove a spare wheel underneath a bipper van

Remove spare wheel

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove spare wheel from bipper van


Find the release bolt from underneath, measure the bolt position relative to edges or some other defined point that you can follow through the same points/edges to the top (you may have to estimate a little) and work out where to drill or remove the ply to reveal the release.

May 14, 2014 | 2010 Peugeot Bipper Teepe

1 Answer

Van no start breakdown diagnosed ignition module fitted new module had it coded at dealership still no start told it is a wiring issue between ecu and ignition module but cannot find any wiring plans for...


Didn't get the model of your van...many times the "crank position sensor" creates this problem...Also many auto parts stores offer free diagnostics...stay away from the costly dealership...talk with a local repair shop about a free diagnosis:) Hope this helps.

Oct 31, 2013 | 2010 Peugeot Bipper Teepe

1 Answer

Where is the spare wheel/tyre stored on the DODGE CARAVAN 2002/4 MODEL 5DOOR SEATS IN FLOOR. THANKS NIC


Your spare tire is located underneath the rear of the vehicle and must be cranked down to remove using the long bar that should be mounted in the back on the inside of the van.

Apr 06, 2011 | 1999 Dodge Caravan

1 Answer

I need to replce my rotor's on an e-250 van. How do I remove them?


Place van in park and place chocks behind the rear wheels. Jack up the van and place two jack stands underneath the frame. Remove the front tires. Loosen the bolts holding the caliper assemblies and use a large flat screwdriver to pull the caliper 1/16 in. Remove the bolts holding the calipers and pads and set the assembly up out of the way. Do not put any strain on the brake lines. Take off the bearing caps. Remove the cotter pins and wheel bearing nuts. Pull the rotors off. Inspect and have them machined or replace them with new.

Mar 25, 2011 | Ford E-250 Cars & Trucks

1 Answer

I just rented a T & C. Is the spare underneath the van. How do you remove it?


The spare is under the front of the van, between the front seats. There is a tool in the back that you use to turn a screw in the floor between the front seats. This lowers the spare tire assembly.
The owners manual should show you how.

Jun 24, 2010 | 2008 Dodge Grand Caravan

2 Answers

Where is the spare tire located on a 1995 ford aerostar?


Section 00-02: Lifting, Jacking and Spare Tire Stowage 1995 Aerostar, Ranger, Explorer Workshop Manual
TIRE STOWAGE Tire, Spare, Removal, Aerostar If the Aerostar is a standard length vehicle the spare tire is mounted inside to a carrier at the left rear quarter panel. To remove the spare tire, remove the wing nut and plate. A flat tire can be temporarily stowed in the same location.



If the Aerostar is the bus with a standard length body or extended length (all models), the temporary spare tire is stowed at the rear of the vehicle under the body. The Aerostar standard length E-4WD bus spare tire is mounted on the floor.
  1. Insert lug nut wrench into the actuator hole and turn counterclockwise until the cable extends to allow the spare tire to be pulled rearward from under the vehicle.
  1. Slide spare tire to the rear and remove the retainer from the wheel.
  1. To stow cable/retainer with spare tire removed, insert cable fitting into carrier rear wall slot, place wheel retainer against the carrier, and turn lug nut wrench clockwise until slack is removed.
please rate, thanks

Jul 09, 2010 | 1995 Ford Aerostar

2 Answers

My VW T5 camper van does not come with a spare wheel. There appears to be a space underneath the rear of the vehicle designed to take a spare wheel. If this is correct then can I get one fitted and would...


t5 originally had a spare wheel underneath but some conversion companies remove it to fit waste water/sewerage tanks etc,you will need to put car on ramp and see if you have enough space,or do whatever the rest of us do and put it on the front(makes a good deer ram...)

Mar 27, 2010 | Volkswagen Camper Cars & Trucks

1 Answer

Spare tire removal from underneath van cant seem to get the tire from the bracket is there a specail way to remove it


What's happening is that the latch is not releasing - a safety feature so the tire doesn't drop down onto the road should the cable or assembly rust/break etc. While researching I got this info from another forum: Jack up the rear of the van. Wind the spare "up". now put your jack under the spare to support its weight. Then "unwind" it. now look up through the spare to the winch assembly. You'll see a latch at the back - towards the rear of the van. Reach in with a long screwdriver and release it by moving it towards the rear of the van. If you've unwound the winch you should be able to move the plastic holder downwards. Once you've done this you can allow the tire to come down and remove it. Now remove the winch assembly - 5 or 6 bolts. Odds are you'll see apiece of wire hanging or it may have fallen out. You'll also see a spring clip - it clips onto the underside so when you unwind the winch it should pull the aforementioned latch to release the tire. You should be able to get this back in place by fiddling with it, or just attach a wire to the latch to work it manually. Or buy a new winch assembly - approx. $150. Good luck

Dec 22, 2009 | 1994 Plymouth Voyager

2 Answers

How to remove wheel on 2001 bmw 325i


In the boot you'll find underneath the carpet, a spare wheel well. Containing a spare wheel, a jack, lever tool to remove the bolts and thats all you need. Make sure the handbrake is on and in gear to stop the car moving. Using the jack, you'll notice rubber jacking blocks on th underside of your car.
These points are where to jack the car up. Jack the car up so the its slightly lifted but the wheel is still touching the floor, this will make it easier to undo the wheel nuts. Best way is to put the wheel bolt removal tool and kick it down to "crack them off". Once all bolts loosened continue to jack car up till the wheel is clear off the ground. Remove all loosened bolts and replace wheel. Job done!

May 25, 2009 | 2001 BMW 3 Series

1 Answer

Spare wheel renault clio


open your tailgate and right in the middle in front of your tailgate catch pull the boot carpet back or there might be a little **** in the carpit when pulled back you should see a bolt head remove your wheel brace and apply to the bolt head turn antyclockwise you spare wheel should drop a you turn it,hope this helps.adrian

Feb 09, 2009 | 1986 Renault Sport

Not finding what you are looking for?
2010 Peugeot Bipper Teepe Logo

Related Topics:

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

mike hayward

Level 2 Expert

279 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...