Question about 2007 Chrysler Pacifica FWD New Cars

Open Question

Interlock solenoid car would not come out of park position

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission won't shift into gear only park works no prior problems just all of a sudden stop Lincoln Continental 2001


I would say it has something to do with this !
Shift Interlock System An ignition/shifter interlock mechanism is installed to prevent shifting the transaxle out of the PARK position unless the ignition switch is rotated to RUN and the brake pedal is applied. The floor shift interlock system consists of:
  • an actuator assembly integral to the ignition/shifter interlock cable assembly.
  • a bracket retaining the actuator.
  • the necessary wiring.
The solenoid is energized when the ignition switch is turned to the RUN position, locking the transaxle range selector lever in the PARK position. When the brake pedal is applied and the stoplight switch (13480) is activated, the ignition/shifter interlock actuator is deactivated and the transaxle range selector lever can be moved out of the PARK position.

Dec 17, 2016 | 2001 Lincoln Continental

1 Answer

The linkage are hooked up but the car still want go into park,a 2000 Taurus


Do you have floor console shifter ?
Shift Interlock System A brake/shifter interlock system consists of the following:
  • ignition switch (11572)
  • brake pedal stoplight switch (13480)
  • brake shift interlock module
  • brake shift interlock solenoid assembly (attached to key interlock assembly)
  • necessary wiring
On floor-shift vehicles, the ignition/shifter interlock cable (3F719):
  • locks the floor shift transaxle range selector lever in the PARK position when the ignition switch is in the LOCK position.
  • requires the floor shift transaxle range selector lever to be in the PARK position to turn the ignition switch to the LOCK position.

May 04, 2015 | 2000 Ford Taurus

1 Answer

My 2005 Pacifica will not disengage from park and the check engine, brake and anti-skid warning lights are all on


SHIFTER LOCKED IN PLACE

  1. Remove the instrument panel cover below the steering column, then remove the steering column shrouds to gain access to the brake transmission shift interlock (BTSI) solenoid. The solenoid is part of the interlock cable assembly.
  2. Disconnect the wire connector from the rear of the BTSI solenoid.
  3. Insert the ignition key and turn it to the ON position.
  4. With the brakes applied, try moving the shifter out of the PARK position.
    • If the lever now moves freely in and out of PARK, perform the Circuit Test below.
    • If the shift lever still does not move from the PARK position, remove the BTSI solenoid from the shift lever assembly. If the shift lever now moves freely in and out of the park position, the BTSI solenoid is faulty and the interlock cable must be replaced. If the shift lever still does not move from the park position, the problem is in the shift lever assembly or the ignition interlock cassette

Jul 30, 2011 | 2005 Chrysler Pacifica

2 Answers

2006 chrysler pacifica - drove car into my garage and shut down. Next morning I could not get the car to shift out of park.


some are set up with safety with brake lites out. ck if brake lites work if not turn key on do not start and shift to neautral and start and have brake lites repaired

Jun 03, 2011 | 2006 Chrysler 300

1 Answer

I can not take my car out of park


CHECK FOR BRAKE LIGHTS.IF NO CHECK FUSE.IF FUSE GOOD.BRAKE LIGHT SWITCH IS FAULTY NEED REPLACING. IN WHICH WILL CAUSE THE BRAKE TRANSMISSION SHIFT INTERLOCK SOLENOID NOT TO WORK WHICH WILL CAUSE YOU NOT TO GET THE CAR OUT OF PARK.IF BRAKE LIGHT SWITCH IS GOOD.PROBLEM COULD BE FAULTY BRAKE TRANSMISSION SHIFT INTERLOCK SOLENOID OR FAULTY PARK NEUTRAL POSITION SWITCH.

Aug 16, 2010 | 1997 Chevrolet Lumina

2 Answers

2006 Chrysler Pacifica- Will not shift out of Park, the steering wheel isn't locked, and the brake is releasing as it should. What else could it be?


Can't get out Park, starts ok, tried the manuel thing pressing
the pink release button, nothing. Had the car towed but
they had to hoist it on a truck. Was there a recall for this?

Jun 09, 2010 | 2006 Chrysler Pacifica

2 Answers

Gear shifter does NOT shwitch from park and break


SHIFTER LOCKED IN PLACE

  1. Remove the instrument panel cover below the steering column, then remove the steering column shrouds to gain access to the brake transmission shift interlock (BTSI) solenoid. The solenoid is part of the interlock cable assembly.
  2. Disconnect the wire connector from the rear of the BTSI solenoid.
  3. Insert the ignition key and turn it to the ON position.
  4. With the brakes applied, try moving the shifter out of the PARK position.
    • If the lever now moves freely in and out of PARK, perform the Circuit Test below.
    • If the shift lever still does not move from the PARK position, remove the BTSI solenoid from the shift lever assembly. If the shift lever now moves freely in and out of the park position, the BTSI solenoid is faulty and the interlock cable must be replaced. If the shift lever still does not move from the park position, the problem is in the shift lever assembly or the ignition interlock cassette

May 09, 2009 | 1998 Honda Accord

2 Answers

Gear shifter is not moving when u press on break


center console shifter? if so, likely could be a misadj shift cable, you can pull loose top cover per instruction maneul tells you how to get out of park till you can get it adj, or repaired

Apr 01, 2009 | 2004 Ford F150

2 Answers

Can't get 1993 Linclon Towncar out of park


SHIFTER LOCKED IN PLACE

  1. Remove the instrument panel cover below the steering column, then remove the steering column shrouds to gain access to the brake transmission shift interlock (BTSI) solenoid. The solenoid is part of the interlock cable assembly.
  2. Disconnect the wire connector from the rear of the BTSI solenoid.
  3. Insert the ignition key and turn it to the ON position.
  4. With the brakes applied, try moving the shifter out of the PARK position.
    • If the lever now moves freely in and out of PARK, perform the Circuit Test below.
    • If the shift lever still does not move from the PARK position, remove the BTSI solenoid from the shift lever assembly. If the shift lever now moves freely in and out of the park position, the BTSI solenoid is faulty and the interlock cable must be replaced. If the shift lever still does not move from the park position, the problem is in the shift lever assembly or the ignition interlock cassette

Feb 21, 2009 | 1993 Lincoln Town Car

2 Answers

2000 range rover


Pull hard on the steering wheel to the left and the steering wheel lock mechanism should release. I mean pull hard to left because shift interlock is froze if you cannot get it this way you will need a pro to help! Good Luck Mate.

Dec 07, 2008 | 2004 Land Rover Range Rover

Not finding what you are looking for?
2007 Chrysler Pacifica FWD New Cars Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...