Question about 2005 Isuzu Ascender

1 Answer

Install coil pack.

Engine is a I6

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 20,706 Answers

Is the missing words,
How to? like in how to remove the bolts and put it back?
is this a single coil
or COPs.
(varies by country)

how to unbolt a COIL pack?
well you unscrew the bolts. is that what you need?

its just a coil?, unplug it and DO NOT MIX wires if this is a wasted spark coil pack, do not.
if cops, say so, 6 cops.
I dont think 2005 has a distributor. so you have either 6 coils
or 3 coils in a pack.
some call the wasted spark pack a coil rail, but is just 3 coils
packed in plastic,
say what you need, get help.l

Posted on Jun 01, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the firing order of the spark plugs in a 2004 Suzuki Verona


no engine stated.


what are doing, no job stated.????????????????
the spark firing order on this car is fixed in the ECU programming.
its 1,3,4,2 for the 4 banger. as is timing.
if car has a single or 2 coil pack, and you scrambled the wires.
then the question is how to wire them , a fact.
if car has 4 coil packs, then none. as the firing order is harness dictated.

Dec 19, 2015 | Suzuki Cars & Trucks

1 Answer

Firing order jeep Cherokee 2004 3.7 l v6


are you doing spark or timing a cam? what? what is JOB?
it dont matter, the engine, ecu does that, (magic)
but if it has a coil pack like my 3.8 then the coil pack must
be wire right and is marked. clearly on the pack.
they have USA jeeps and Export. country never stated here. sad huh?
and use differnent spark systems (3 types used, but 2 common)
per below.

v6.
is this not a Cheokee? the non Grand ended in 2004. so...
ill go with GC 2005, v6 3.7L
the v6 began in 2005, not 2004, but, maybe yours is the first./

the 3.7 has coil over plug, spark, 6 coils.
and the harness is fixed to those coil so all firing order are
dictated in the ECU/PCM (hard coded)

VIN engine code, K. (not stated)
http://www.fixya.com/cars/t13893405-firing_order_diagram_3_7l_jeep_2006

and already asked, and answered .

my 3.8 (2004) jeep.
is 1,2,3,4,5,6
and is like this.

mine uses wasted spark system.

http://www.fixkick.com/look/odds-ends/jeep/2008-JK/slideshow/firing-order.JPG


so post VIN, or tell what engine is really there.
and the true year. or build date (sticker)

so my answer is.. 2005 GC, 3.7L V6, not I-6
it has 6 cops, "coil over plugs" 6 induction coils
and runs same firing order, as the old I6 did.
1-5-3-6-2-4
but the I6 4.0liter runs a coil pack and is quite different.
these;

25312317-ojiabjcoymo5cw32jzjg31w5-2-0.gif
times 6
all laced in, hard.

Dec 07, 2014 | 2004 Jeep Grand Cherokee

2 Answers

Replaced 2 coil packs and still running rough 2003 trailblazer


try replacing or cleaning the injectors
when misfiring moves around it is seldom the coils , plugs and any thing else connected to spark but dirty fuel, low fuel pressure and dirty injectors or injector control
use a quality injector cleaner for a few tankfills

Sep 02, 2012 | 2003 Chevrolet TrailBlazer

1 Answer

2000 Jeep GCL P0306


Many problems cause a misfire code, to understand what to check and what might be the cause or causes of the misfire please read the article at this LINK. The link is copyrighted so I can't copy it and paste here.

Jul 09, 2012 | 2000 Jeep Grand Cherokee

1 Answer

Im trying to change the ignition control module in my 1997 astrovan but i cant get it out


does it have the 6 cylinder engine with the 3 coil packs on top? If so, remove spark plug wires from coil packs, remove 2 screws that hold each pack down, remove coil packs (but remember to put everything aback as it was when finished! includes where wires were on coils), remove screw that holds the connector to the module, install new module to connector and reverse to install.

Aug 14, 2011 | Chevrolet Astro Cars & Trucks

2 Answers

How do I replace the ignition coil in my 2002 ford taurus



Removal & Installation

3.0L (VIN S) Engine

  1. Disconnect the negative battery cable.
  2. Unplug the engine control sensor wiring connectors from the ignition coil and the radio ignition interference capacitor.
  3. Tag and disconnect the spark plug wires from the coil by squeezing the locking tabs, then twist the tab and pull upwards.
  4. Unfasten the four ignition coil retainers and remove the coil and the coil ground wire the radio ignition interference capacitor. Save the capacitor and coil ground wire for re-installation of the coil assembly.
  5. Wipe the coil towers with a clean cloth dampened with soap and water. Remove any soap film and dry with compressed air. Inspect the coil for cracks, carbon tracking, dirt or damage and replace as necessary.

    0996b43f802333d8.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Ignition coil assembly mounting-3.0L DOHC engines


To install:
  1. Place the coil, capacitor and the coil ground wire onto its mounting location on the right hand valve cover.
  2. Install the coil assembly retainers and tighten to 45-61 inch lbs. (5-7 Nm)..
  3. Apply dielectric compound D7AZ-19A331-A or its equivalent to the spark plug wire boots.
  4. Attach the spark plug wires to their proper terminals on the coil and make sure the boots are firmly seated so that the locking tabs engage.
  5. Attach the engine control wiring connectors to the ignition coil and the radio ignition interference capacitor.
  6. Connect the negative battery cable, start the vehicle and check for proper operation.

Dec 19, 2010 | 2002 Ford Taurus

1 Answer

What are the torque specs for the main caps?


Engines & Power (more) Four-Wheel Drive Trims
spacer.gif Laredo 4WD TSi 4WD Limited 4WD Orvis 4WD Standard Engine 4.0L 185 hp I6 4.0L 185 hp I6 4.0L 185 hp I6 4.0L 185 hp I6 Horsepower 185 @ 4600 RPM 185 @ 4600 RPM 185 @ 4600 RPM 185 @ 4600 RPM Torque (lb-ft) 220 @ 2400 RPM 220 @ 2400 RPM 220 @ 2400 RPM 220 @ 2400 RPM Rear-Wheel Drive Trims
spacer.gif Laredo 2WD TSi 2WD Limited 2WD Standard Engine 4.0L 185 hp I6 4.0L 185 hp I6 4.0L 185 hp I6 Horsepower 185 @ 4600 RPM 185 @ 4600 RPM 185 @ 4600 RPM Torque (lb-ft) 220 @ 2400 RPM 220 @ 2400 RPM 220 @ 2400 RPM

Nov 12, 2010 | 1997 Jeep Grand Cherokee

1 Answer

There is a misfire in my engine, changed plugs & wires. now it reads that the fuel leveling sensor is bad, will this help?


If there is a misfire, the cylinder that it is misfiring in will be recorded as a code in the computer.

Have the car scanned to determine which cylinder is bad. Then, replace the coil pack going to that cylinder.

Ignition Coil Pack Removal & Installation 2V Engine To Remove:
  1. Twist the spark plug wires off of the ignition coil towers. Mark the spark plug wire positions so they can be installed in their original positions.
  2. Disconnect the electrical connector from the ignition coil. CAUTION
    When removing the spark plug wires, a slight twisting motion will break the seal and ease removal.
    coilconn.gif

  3. Remove the mounting screws and remove the ignition coil.
To Install:
  1. Position the ignition coil pack on engine.
  2. Install mounting screws and torque to 53 in-lbs. (6 Nm). coilbolt.gif

  3. Connect ignition coil pack electrical connector.
  4. Match previously marked spark plug wires to ignition coil and install.
4V Engine To Remove:
  1. Remove the RH cowl grille cowlpic.gif
  2. Remove the screws and the water shield
  3. Mark spark plug wire positions
  4. Disconnect the spark plug wires from the ignition coil CAUTION
    When removing the spark plug wires a slight twisting motion will break the seal and ease removal.
  5. Disconnect the ignition coil electrical connector coilconn.gif

  6. Remove the mounting screws and remove the ignition coil
To Install:
  1. Position ignition coil pack. Install mounting screws and torque to 56 in-lbs. (6Nm)
    coilbolt.gif

  2. Connect ignition coil pack electrical connector
  3. Match previously marked spark plug wires to ignition coil and install
  4. Position water shield and install screws
  5. Install RH cowl panel
prev.gif next.gif

Aug 11, 2010 | 2002 Ford Taurus

1 Answer

Were are the spark plugs on a 2000 dodge intrepid r/t 3.5


Ignition Coil Removal & Installation To Remove:
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:
    • The spark plug cables from coil pack
    • The electrical connector Coil Pack dod_intrpd_coil_pack.gif

    • The ignition coil fasteners
To Install:
  1. Install or connect the following:
    • Ignition coil fasteners
      1. Torque to: 105 inch lbs. (12 Nm)
    • The electrical connector Ignition Wire I.D. dod_intrpd_coil_pack_id.gif

    • The spark plug cables to coil pack
---
Ignition Coil-On-Plug Removal & Installation To Remove:
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    • Electrical connector from ignition coil. NOTE: On 3.5L engines, it is necessary to loosen the screws by alternating back and forth. Do not lose the spacers under the coil when loosening the screws.
    • 2 fasteners from ignition coil assembly
    • Ignition coil assembly.
To Install:
  1. Install or connect the following:
    • Ignition coil assembly
    • Screws
      1. 2.7L engine - 55 inch. lbs. (6.2 Nm)
      2. 3.2L engine - 60 inch. lbs. (6.7 Nm)
      3. 3.5L engine - 60 inch. lbs. (6.7 Nm)
  2. Connect the electrical connector.
prev.gif next.gif

Aug 10, 2010 | Dodge Intrepid Cars & Trucks

1 Answer

Dont know how to take master cylinder off to replace coil pack


You shouldn't have to remove it....here are the steps from the tech manual:

Removal & Installation
  1. Disconnect the negative battery cable.
  2. Label and disconnect the spark plug wires from each of the coil pack towers.
3db79bc.gif
Ignition coil removal—2.4L engine

2f61688.gif
Ignition coil removal—3.3L and 3.8L engines


  1. Disengage the electrical connector from the ignition coil pack.
  2. Remove the coil pack mounting fasteners.
  3. Remove the coil pack from the vehicle. If equipped, remove the coil pack from the mounting bracket.
To install:
  1. Place the coil pack into position on top of the engine valve cover, or mounting bracket, if equipped.
  2. Install and tighten the coil pack mounting fasteners to 9 ft. lbs. (12 Nm).
  3. Plug in the electrical connector to the ignition coil pack.
  4. Connect each spark plug wire to each corresponding coil pack tower. The coil pack towers are numbered with the correct cylinder identification. Be sure that the spark plug wires snap firmly onto each coil tower.
  5. Connect the negative battery cable.

Jan 18, 2010 | 2001 Chrysler Voyager

Not finding what you are looking for?
2005 Isuzu Ascender Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...