Question about 2002 Isuzu Rodeo

1 Answer

Where is the ecu ground on a 2002 4sl rodeo

Horn wont blow and ecu wont read bur fuse is good

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 20,706 Answers

Old post
" ecu wont read bur" ><<<< i can not decode this.
bur, vur,nur, byr,bir, nah, bue, but, ah its BUT? (type analysis, me bad)
ECU won't read ,but fues is good, (test fuse, never just look)
What does wont read mean. by what tool by what actions, by you.?
IF the ECU will not scan with a new scan too the fuses are blown.
period! (or wrong scan tool;) this year is VPW OBD2. (ask)

simple answer, alldata.com RTM.
long answer.
we cant answer on any car lacking engine size (type) and country.
sorry. can't. and be RIGHT.
in uSA its 3 engine this year.
2.2 L I4
3.2 L V6
3.5 L V6 each can be quite different, post engine.

Generics.
horn don't blow can be blown fuse. test them. the one marked HORN being first.
can be bad horn relay or bad clockspring. or even a bad horn
to test any horn, HOT wire it. to any 12vdc battery.

ECU issues, gee, what country and engine and what are the Symptoms of your ECU. in details. running or not.
hot or cold, driving or not.

Posted on Jun 01, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
betz73
  • 298 Answers

SOURCE: 97 rodeo heater fan wont blow i checked fuses

I would check your blower motor. That sounds like the problem.

Posted on Nov 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No horn and no right hand turn signal bulb good,icannot find fuse to the horn ifound signal fuse it is good


Horn also uses a relay . What year , make , model vehicle. The odds of the fuse being the falt are high , Fuse's do blow , but not for no reason . Short's to ground cause fuse's to blow . Which means electrical wiring problems or short's in electrical componets . Do you know what a relay is an how it works ?
VEHICLE RELAYS Operation Diagnosis
Do you know what electrical wiring diagrams are ? How to use to pin point areas in a electrical circuit ,to test with a DVOM - digital volt ohmmeter ?
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts

Free wiring diagrams here http://www.bbbind.com/free-tsb look under electrical distribution - power distribution . fuse panel . will show fuse layout .

Feb 01, 2018 | Cars & Trucks

1 Answer

2001 VW Bug Horn was randomly honking, Now it wont work at all. Relays and Fuses are good. Should I just replace the horn itself? Not quite sure whats the issue.Want to figure out before making drive


it the horn activates randomly when driving and when the steering wheel is moved , the problem will be the ground contact under the steering wheel
there is a small spring loaded button that runs on a slip ring in the back of the steering wheel and intermittent/ random operation can be traced back to a fault in this area
the horn works so it is good , the fuses and relays are working to make the horn work so they are good ( unless there is a grounding problem with the relay causing the relay to operate and blow the horn)

Sep 16, 2016 | 2001 Volkswagen Beetle

1 Answer

Horn wont blow


Check for blown fuse first. If fuse ok, you will have to check for a power and ground supply directly at the horn itself. Possible causes are... defective horn...blown fuse.... defective horn relay....defective horn pad.... defective clock spring..... broken wiring. There is a lot of electrical diagnostics that need to be performed to make this simple horn operate

Sep 05, 2015 | 2001 Nissan Sentra

1 Answer

2002 rodeo is my obd ground bad my ecu wont communicate and horn wont blow but fuse is good


great question, im ane ECU spirt. )EFI.
what country, nobody ever says, that but gee, the OBD varies buy
COUNTRY!
Ill pretend USA. /Canada.

In the USA the car has OBD2. and you need a scan tool that works
on 2002 cars.
what engine, some engines have different ECU. radical differ..
they had like 3 engines here, other countries 9.

the scan tools connects to the 16pin, OBD2 connector at dash.
i the car is Can-bus. it needs a can-bus tool, all new tools work on canbus but old ones never do. (i have them back to 1995 and know this)
NON comms and tool is ok, not wrong tool . diagnosis.


  1. Pin 16 not at 12vdc, (blown fuse)
  2. ECU dead, 99% of time blown fuse to EFI. test the fuses to all EFI parts. alldata.com wiring shows that.
  3. bad wiring to the DCL connector (rare) or from there to ECU
  4. yes, some crappy tools have no ground on both pin 4 and 5, buy a tool that has 2 pins there. OR it will fail on some cars. seen many POS ELM327 tools that do this horror, get a tool called, INNOVA 3160 and stop guessing, this tool works on all cars.
  5. barrow, rent , or buy or ask any sharp mech top scan car , his tool works.
  6. Fuses that look ok can IN FACT be bad, we never assume they ar good we test them. using either method, OHMS or 12vdc on both sides, is better. see? only the voltage matters, all else punts.
  7. The 3.3l communicates on pin 1 and 2..
pin 2 is PCM/ECU. VPW signalling.
and is not can-bus, yet.
simular to this.
http://ww2.justanswer.com/uploads/FO/fordguy4u/2013-03-02_224407_a1.jpg


top right photos
http://www.diagnostics4u.com/uploads/asset_image/2_4.jpg


there you go, you tool must have VPW support on pin 2.

Apr 01, 2014 | 2002 Isuzu Rodeo

2 Answers

Horn doesnt work all fuses and relays are good


If you know the fuse and relay have power, you should be able to jumper the relay and make the horn blow. The horn pad on the steering wheel usually grounds the relay. If you can jumper the relay and make the horn blow, the problem may be the horn pad or the clockspring in the steering column.

Sep 25, 2012 | 2003 Chevrolet Silverado 1500

1 Answer

1993 Geo tracker blows fuse when the horn is honked


If blowing fuse when honking horn you have a bad ground to the horn or the horn itself has a internail switch. Try using a higher amp fuse, good luck

Apr 04, 2011 | 1993 Geo Tracker

1 Answer

Horn on 99 rodeo doesnt work, when i press the horn I hear a clicking noise in glove box area


clicking is probably a good sign
it should be telling us that the switch, fuse and wires are okay

first guess would be a bad horn

however, easiest diagnoses will be to swap relays with a know good and retest

finally, at least jump a live power wire to the horn to see if they work...still could be a ground issue at the horn


Apr 12, 2010 | 1999 Isuzu Rodeo

1 Answer

On my 1972 duster,when i blow the horn,the fuse blows and the tail lights go out also. the same fuse runs both.what could be the problem?


This sounds like the horn may have a short in it somewhere. Does the horn blow at all? Try this: Make sure you have a good fuse installed to this circuit again. Disconnect the horn and place a volt/ohm meter set to DC volts on the horn connections. If there is just 1 wire going to the horn, put that wire on the red wire of the meter. Put the black wire of the meter to a good ground, preferably the negative battery terminal. Now press the horn and see if there is a reading of around 12 Volts. If so, replace the horn. If not, and the fuse blows again, check the wiring for a fray/short to ground. When you're looking at the horn of course, make sure the positive lead isn't shorting to ground as well.

I hope this helps! Let me know if you need any more assistance! :)

-Jason

Feb 11, 2010 | 1983 Plymouth Gran Fury

3 Answers

Horn wont work.i check the fuse in the door and


Maybe horn became unplugged. Put 12 v power to horn make sure horn works. Put test light on terminal on horn have someone press the horn button, if light comes on and horn does not blow you may need new horn. if light does not come on you may have bad contact at horn button, blown fuse, broken wire, bad horn relay or possibly just a bad ground.

Jun 22, 2009 | Chevrolet Blazer Cars & Trucks

1 Answer

My 1995 Isuzu Rodeo new horn won't work


there are 2 horns that have different frequencies so that you get a louder harmonious noise when you activate the horn
now you have blown the fuse or the relay is no longer working
make sure that you have fitted the ground wire correctly

Aug 23, 2017 | 1995 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14408 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...