Question about 1988 Toyota Camry

2 Answers

Reverse lights/Rear internal brake light not working

Ive replaced all bulbs and my rear window brake light isn't working. When I reverse, the lights will not come on. Checked the wiring and I don't see any issues.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 4,514 Answers

Probly a switch etc needs replacin-many othr things are aging too--get a haynes manual or other at a partsplace for complete rpair

Posted on Apr 01, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 70 Answers

There is a reverse switch on top of the trans where the shift cable is attached. is there power to and through that switch while in reverse? the cyclops light needs the power interruption traced back from the socket to the switch on the brake pedal to find out where you have lost power or possibly taped into brake power at another brake light bulb socket

Posted on Apr 01, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset reverse light indicator camry


Make sure the tail lights and brake lights are working including the one in the rear window, if any of these are out the dash warning light will stay on, any bulbs that look discolored should be replaced

Mar 16, 2014 | Toyota Camry Cars & Trucks

1 Answer

My 1995 chevy s10 brake lights reverse lights high mount light all went out and cant find out why


Check connection on frame that operate rear. Do the rear parking lights work, turn signals?

Dec 26, 2013 | Chevrolet S 10 Cars & Trucks

2 Answers

2000 jeep grand cherokee none of the rear lights work


Check BackUp Module, generally is located in the rear quarter panel (drivers side).

Dec 23, 2012 | 2000 Jeep Grand Cherokee

2 Answers

I just purchased a 1996 cavalier. It didn't have an owners manual and i need to know what the abrieviations on the fuse box stand for. I'm trying to find the fuse for the brake lights and rear turn...


Hi, the likely problem is the turn signal switch. The signals and brake lights use different fuses. You can get an owners manual here:
http://www.extendedgmwarranty.com/owners-manual/chevrolet/1996-Chevrolet-Cavalier.pdf

A new switch is about $40, and it isn't too hard to replace. Make sure you get one that has the same controls as yours does. To replace the switch, remove the covers from the steering column, disconnect the switch and unscrew it from the column.

Please let me know if you have questions, and thanks for using FixYa.

jturcotte_2105.gif

Aug 18, 2011 | 1996 Chevrolet Cavalier

1 Answer

Rear parking lite on dvrs side wont come on only when brakes applied


lopen your tail light assy... check/replace bulbs common problems bulbs filament grounded if you have a tester, test brake light and reverse bulbs on driver side only.... if not check for lose groundline on wire of reverse light... if you have a lose ground on reverse line, the reverse light only lits up when braking becoz it shares the ground line on brake...

Nov 22, 2010 | 1995 Cadillac Eldorado

1 Answer

How do i change a brake light bulb on 2000 vw jetta?


Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Remove rear luggage compartment side panel trim (left or right).
98971821.gif
  • Remove 3 nuts, arrows, and remove housing.
  • Remove bulb holder.
Installing:
  • Install bulb holder.
  • Insert housing into body opening.
  • Tighten nuts.
  • Install applicable rear luggage compartment side panel trim.
Rear Light Bulb Holder Removing And Installing:
Removing:
  • Disconnect electrical connector.
  • Depress retainers, arrows, and remove bulb holder.
98971817.gif Installing:
  • Install in reverse order of removal.
And the Center Mounted Brake Lamp.
High mount Brake Light Removing And Installing:
The high mount brake light is installed in the rear shelf.
98971288.gif Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Disconnect electrical connector from high mount brake light.
  • Remove rear shelf
  • Un-clip high-mount brake light from rear shelf, arrows.
  • Install in reverse order of removal.
NOTE: The bulb holder base plate contains soldered- in light emitting diodes (LEDs) that are not replaceable. In the event of LED malfunction, replace complete bulb holder.
Additional

Mar 13, 2010 | 2000 Volkswagen Beetle

1 Answer

Reverse lights flash on/off when car is put into reverse; Mercedes 98 E320. Also the rear center brake light does not work at all. All of the bulbs have been checked/replaced so they are not the issue.


REVERSE LIGHT PROBLEM COULD BE LOOSE WIRES OR FAULTY TRANSMISSION RANGE SENSOR.THE REAR CENTER BRAKE LIGHT COULD HAVE FAULTY BULB SOCKET OR GROUND WIRE AND THE CONTROL MODULE THAT CONTROLS IT CIRCUIT.

Feb 14, 2010 | 1998 Mercedes-Benz E-Class

1 Answer

How do you change the rear window brake light bulb on a 93 Honda


unscrew the case from around the light pull the case off and then youll have access to the bulb take the bulb out usually turns counter clockwise replace with new one reverse the process.

Nov 14, 2009 | 1993 Honda Accord

1 Answer

HOW MANY BULBS ARE IN THE REAR LIGHTS (SUCH AS FOR PARKING, REVERSE, BRAKE). IF WARNING LIGHT ON PANEL IS ONE, WOULD I SEE A BURNT OUT BULB?


You may or may not see a burnt out bulb. The dash light can also mean there's a current issue (ie none of the bulbs are lighting)

2 reverse bulbs
2 license plate bulbs
2 turn signal bulbs
2 rear sidemarker bulbs (side of your tail light assembly)
2 running light bulbs which are the same as your stop light bulbs in the tail light assembly
1 to 6 high mount stop light bulbs (if they're in the window and varies on models)
1 strip of LED brake lights if you have a spoiler



Sep 24, 2009 | 2002 Toyota Camry

Not finding what you are looking for?
1988 Toyota Camry Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...