Question about Toyota Corolla

2 Answers

HARD START WHEN ENGINE IS COLD - 1RZ PETROL ENGINE

The engine performs well once it has run the main challenge is to start it when its cold, however it starts when the cold sensor in UNPLUGED.The battery is new,the startor motor is new,plugs are ok.The pressure from the returner pipe is low.Could the pump aslo have effects when the engine is cold?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 20,706 Answers

Old post 9 months
the ECT???? pulled, forces huge extra fueling.
no year, wow
a 1Rz in a corolla , really?
or 1RZE?
what engine,
is it carb or EFI
what year,
what country.
bingo !
corolla's uses a vast number of engine from beginning to now.
and varies by country.

if EFI and cold sensor means ECT (true name)
then that means engine is lean.
low fuel pressure, !
vacuum leaks if MAF based engine,?
partially clogged injectors.

do tell more, and can help, my guess is its a 1RZE engine and not CARB.

Posted on Jan 27, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 950 Answers

Valve clearance is too low. Thanks.

Posted on Jan 23, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 350 Answers

SOURCE: Golf TDI 1998 problem with cold start

hi change the glow plugs and no its not normall there should be no air in the system it is either sucking air or it has not been bled properly last time system was worked on usually when changing the fiter check the whole system for signs of leaks if non found bled the system until you get rid of them yates210456

Posted on Oct 17, 2008

  • 1 Answer

SOURCE: Low speed stalling while engine is warm

My 1994 Caravan with the 3.0L used to stall occasionally when warm at low rpm. Several years ago I read an article on the internet on stalling and hesitation on these vehicles. The writer recommended spraying an entire can of Mopar Combustion Chamber Cleaner {available at any Dodge/Chrysler dealer} into the throttle body while the car is idling. Then shut off the motor and let it set to dissolve the carbon deposits. After a couple of hours, drive the car and try to do at least 5 full throttle starts as traffic allows - floor it, slow down, repeat. This is supposed to burn out the excess deposits and it worked for me. I use this stuff about every 6 months now, and I haven't had a problem with stalling in years. In fact at over 200,000 miles, my Caravan performs better than it did 10 years ago. A can costs around 7 bucks, so its a really cheap fix!

Posted on Feb 28, 2009

  • 125 Answers

SOURCE: 88 Toy, 22R Carb, hard cold start

in your carburetor there is a priming passage. look in there with the air cleaner out and pump the butterfly it should squirt gas. if it doesn't then you need to open the top part of the carb and clean the hole with a hair clip. if this is not the problem it will be the choke but I'm 70 percent that this is the problem.

Posted on May 25, 2009

  • 3 Answers

SOURCE: 97 jetta won't start when engine is cold

It sounds like your starter motor could be at fault.

Does it turn over slowly,or not at all with out the jum leads?

Posted on Jun 28, 2009

  • 104 Answers

SOURCE: mazda protege 96 very hard to start when cold,

check the mas air flow sensor(is this the 6 cyl) the sensor has a problem with the nose piece inside not moving enough to tell the ecm the propper air flow for the cold start,also check throttle valve for dirt build up around it-if its a four cyl repost

Posted on Oct 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the cold start sensor on Mazda 160i engine mounted?


as its a petrol engine it wont have a cold start as such , when was it last serviced ? that could be the problem if not done regulary and recently , if have a good service record then i'd get the OBD codes read as may have a sensor/switch causing the issue

Jul 06, 2015 | Mazda Cars & Trucks

1 Answer

I find it hard to start my l 200 after running several minutes.i could start it in the morning after I on the switch what ,s the problem.


May just be a bad temperature sending unit. Once warmed up, it's supposed to go off cold start, which puts more fuel to the engine. If sending unit is not telling the computer the engine is warm, it will still be putting more fuel into the engine and flooding it, making it hard to start. Check/replace said sending unit and you're good.

Sep 24, 2014 | Cars & Trucks

1 Answer

Toyota petrol engine hard start when engine is cold?


what year? some engines have a"cold start injector" in the intake manifold. find it , check it , replace it and the fuel filter. also check fuel pressure, a weak or bad fuel pump may be the problem

Mar 28, 2014 | Toyota Corolla Cars & Trucks

1 Answer

Automatic choke not working


There is no choke on a 94 Camry. Might you have posted in the wrong category?

The extra petrol required for a cold start on this car is supplied by the injectors as controlled by the car's computer. If you experience hard starting and hesitant running when cold, it is most likely that you have a

- failed enginetemperature sensor
- malfunctioning fuel pressure regulator or fuel pump
- faulty cold start injector (3VZ engine only)
- carbon tracks on distributor or rotor surfaces

Oct 06, 2013 | 1994 Toyota Camry

1 Answer

What could cause a 1994 Chevy beretta not to start


a bad engine coolant temperature sensor will cause cold no start conditions.your coolant sensor main sensor during cold start condition because when engine coolant cold PCM will cause rich fuel mixture for cold start up when engine coolant and oxygen sensor warms up cause engine goo in close loop lean mixture.but coolant sensor is the main information sensor if bad it will cause many problems.

May 01, 2012 | 1994 Chevrolet Beretta

1 Answer

2001 vw golf gt tdi is struggling to start when cold and sometimes hot..when started it struggles 2 stay ticking over at 900 revs...what can i do??please help


golfs coldstart system works when you open door/shut door/put key in hole and turn on (in that order)if you delay puting belt on for longer than say 30 secs the coils go cold,hence poor starting.if engine labours after cold start try using (really)one gallon of petrol in tank to clean injectors.
british army put petrol (30%)in diesel tanks of challenger tanks in arctic
to stop fuel freezing.....most parts replacement jockeys in garages will say if you put diesel in tank it will have to flushed out.lot of bollocks.
trust me.have put petrol in by mistake loads of times,only get hot start
problems if you put in too much.

Feb 05, 2010 | Volkswagen Golf Cars & Trucks

2 Answers

Need to change glow plugs on a mercedes C220D 1998


dont bother too much with thebullshit recipe .mercedesbenz were built in a cold country and have the cold start tecnique off pat .you need to establish if all the glow plugs are working .,if the engine misses and runs rough when it does start then the glow plugs are not all working but you need to test them with a test light and i would be inclined to think you will need to replace them. do them all as the ones that do work will stop soon.they all seem to go around the same time------------"youdoit "

Oct 15, 2009 | 1998 Mercedes-Benz C-Class

1 Answer

1993 izuzu bighorn hard to start then dies like no petrol, when it does start blows black smoke like running rich ?


check injectors for leakage when engine off-will have to install fuel press gauge run engine and check press ,turn off engine and whatch gauge -see how long it takes for press to drop,will cause hardstart hot engine-but should start better cold

Sep 19, 2009 | 1993 Isuzu Trooper

1 Answer

1991 dodge colt won't idle when engine is cold.


probably oil, it may be too thick when it's cold but once it warms up it liquefies and your engine runs smoothly. you could try changing oil, I'm guessing if you have a high performance oil the chances this is the problem may be greater since high performance things are usually geared towards working well when everything is hot

Jun 29, 2008 | 1991 Plymouth Colt

1 Answer

Running on lpg then stop turn engine off then start engine and drive 20 metres and engine stalls! switch over to petrol and runs ok switch back to lpg and stalls


check that your cooling system if full of coolant. the coolant that keeps the engine cool actually keeps the gas converter from freezing. alternatively is it hard to start of a morning when cold, if so could be butane wax build up from the gas, in the convertor.

Jun 22, 2008 | 2007 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...