Question about Ford Cars & Trucks

1 Answer

I have a 2002 Ford Econline E350 that the front air comes out only out of the windshield area, no air out of face/feet area. Already replaced the Blending Door Actuator, please help! :)

Blending door issue on 02 econline e350, already replaced blending door actuator, now what? please help

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 8 Answers

Go directly towards a vacuum leak . The vacuum reservoir is notorious for going bad in the these vans , unfortunately you have to pull the heater box to repair it which takes numerous hours. Hopefully it is just a vacuum leak that's accessible. If its a diesel I would first check the vacuum pump , if its gas then start by checking the small vacuum line under the hood along the cowl on the right rear of the engine compartment. Pull apart one of the tee fittings and check for vacuum with the engine running . Then check inside the truck pass side under dash for a bunch of vacuum hoses . Got vacuum?

Posted on Apr 02, 2014


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 424 Answers

SOURCE: cant find the blend door actuator on 2003 ford f150 super crew

The temperature blend door actuator is located on the right side of the transmission hump under the evap. case. The floor ducts cover it.

Posted on Jun 22, 2009

  • 236 Answers

SOURCE: Where is the blend door actuator located? Is it a

buried in the dash, about an 8 hour job.

Posted on Oct 13, 2009

  • 9 Answers

SOURCE: NO heat in front of 2001 windstar van. Thumping

Blend air door may be stuck. I removed a pencil from a heater box before. It had fallen from the dash, down through the defrost vents and jamed the door.

Posted on Nov 13, 2009

  • 1 Answer

SOURCE: blend door actuator needs replacing does the

no it doesnt ... check out if you have to replace the blend doors .... but the actuator is directly behind the glove box...remove the glove box take out 3 screws and remove actuator and replace.....waa laa

Posted on Nov 25, 2009

  • 5 Answers

SOURCE: how to replace blend door actuator in a ford

I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.

Posted on Dec 07, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2005 ford focus ... the defroster button is on defrost and no air comes out of the defroster to the front windshield but blows out at your face and feet??? trying to get this fixed before snow flies...

well if it blows out at your feet you know the blower is running (as it's a common problem for blower motor shaft to rust up from AC condensate drain plugged up) but in your case it sounds like the air diverter damper arm actuator is broken or just stuck (yes it can rust too) you'll need to remove toe space cover to gain access to it on passenger side floor move heater contol back and forth to watch it move Or (NOT) you may have to free this up or replace it

Oct 30, 2013 | 2005 Ford Focus

1 Answer

1993 ford e350 cutaway

brake fluid hose towards the front wheels in the brake master is blocked.

Jun 20, 2013 | 2002 Ford E350

1 Answer

How to fix water leak for Ford e350 Econoline - 2007

pour liquid glass into your radiator, its hard to find but effective.

Jan 12, 2013 | Cars & Trucks

1 Answer

I have a 2003 Ford Taurus and the A/C only will come out of the defrost area of the front window. It wont lwet me choose feet area or face area just defrost.

Sounds like a wiring problem with the harness behind the dash.
You have one or more blend doors that open and close to direct air flow thru the vents. If there is a problem, the default position is defrost for safety.
A mechanic would check the blend doors for voltage and operation.

Jul 09, 2012 | Ford Taurus Cars & Trucks

1 Answer

2002 ford e350 van. I have no air coming through the rear vents but the blower motor is working great.

Sounds like it could be a blend door problem. Common among dual a/c Fords. Try disconnecting the battery for a few minutes. Sometimes this will reset the blend door actuators. If this doesn't work then the actuator will need to be replaced.

Jul 03, 2011 | 2002 Ford E350

2 Answers

No air blowing 1998 Ford E350

blower motor location is in the heater box down by the passengers feet the fan relay in out under the hood in the power fuse box check this first
check to see if the blower motor turns you can do this by removing the three screws the motor and squiral cage will come out spin it if it moves freely putit back replace the switch assembly

Mar 03, 2010 | 2002 Ford E350

1 Answer

Why would the rear ac in my 2002 ford e350 7.3 not blow cold air whaen the front will freeze you?

something is wrong with the rear AC expansion vlave, have it checked, this part controls the temperature.

Feb 21, 2010 | 2002 Ford E350

2 Answers

Hi, My blower on my E350 1994 Ford is not working anymore... Where is it? Perhaps I can replace it myself. HELP !!!

i have a 2000 Ford E350 1 ton Van the heat works in front but blows cold air in rear. Would the problem be a blower heater switch and where is it? I hope I don't have to take off the whole dash.

Jan 28, 2010 | 2002 Ford E350

1 Answer

Windshield wipers will not move. Arms from motor


The windshield wiper linkage comes as an assembly. The assembly comes with the two rotating splines that the wiper arms attach to. you must remove wiper arms. Remove cowl trim and remove bolts that hold the pivot points to the body. The new linkage that snaps to the wiper motor should come with a new retaining clip. You have to fish the linkage assembly through the access holes in the body by un bolting the wiper motor.

Dec 19, 2009 | 2002 Ford E350

1 Answer

My 2005 Ford F 350's AC will not blow through the front vents anymore. Still cools, just comes out the windshield defroster, won't switch to the front vents.

The switch is controled by motor vacuum it may have come loose from under the hood or the back of the switch its self or it could be pluged W/Debris Remove the switch a chiltons manual will explain how step by step. theese manuals can be found at almost any auot parts store. If it is just dirty soaking it in hot water may clean it out. If tht vacuum line is bad cracked dry rotted ect, it runs about 30cents a foot to replace. Good luck with it

Nov 15, 2009 | 2002 Ford E350

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides