Question about 2011 Jeep Grand Cherokee

1 Answer

Radio not working

Radio has power but no volume

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Sounds to me like the radio lost its pass word code.
(or a power amp fuse is blown)
check fuses. , this time. more carefully.
some radios go to now amp mode, will tune but are in pass word mode.
if you drain the battery , this happens everytime.
oldest story in the world this.....

http://www.jeepforum.com/forum/f96/obtaining-anti-theft-radio-code-1350588/

if all power pins on the radio have 12vdc and if radio has external amp
there are like 4 or 5 radio options on new jeeps.
so if it has an external amp,it too has power pins, if they have 12vdc
then the fuse is not blown. (the fsm shows the wiring and fuses, read the FSM)
if the radio is still dead, it can be the radio code issue.
if the fuses are good , its Jeep dealer time.

Posted on Mar 31, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What to do when volume is not working on radio 2004 Toyota seqouia


It may be the radio itself, the speakers or wiring, have it ckd out

Feb 09, 2017 | Toyota Cars & Trucks

1 Answer

How do I get volume to work on a pioneer radio sl600class


It is a potentiometer. Sometimes you can push it in or pull on it, while turning it to clean up the very small tabs in it. If that doesn't work, replace the radio.

Oct 26, 2014 | Cars & Trucks

1 Answer

No volume from factory radio after replacing a dying battery.


Is their any other problems that showed up after the battery change ?

Feb 10, 2014 | Cars & Trucks

1 Answer

Radio volume control on 2007 Subaru Tribeca does not work, but remote volume control on steering wheel works. Any suggestions on repairs?


Radio volume control on 2008 Subaru Tribeca does not ...

www.fixya.com/.../t25735073-radio_volume_control_2008_subaru_trib...
Jun 7, 2015 - Radio volume control on 2008 Subaru Tribeca does not work, but remote volume control on steering wheel works. ... does not... Replace the volume control(rheostat) inside the radio. .... Oct 09, 2014 ' 2007 Subaru B9 Tribeca.

Nov 04, 2013 | 2007 Subaru B9 Tribeca

1 Answer

Radio stopped working


Check to make sure your Volume is turned off. you did not say if the POWER is not there.

Check to see if you burned out a fuse

Test the Radio with applying power, if you apply power and it still does not work, then you are going to install a new aftermarket Radio and be grateful for it later.

Some Radio's have a FUSE inside, you could have also an Inline Fuse.. Check the Power at the Fusebox FIRST... then work your way to the Radio.

It could be a 1 minute fix

Apr 16, 2013 | 1999 Chevrolet Venture

2 Answers

Volume control for radio/disc player does not respond. Is it a fuse?


Thanks for choosing FixYa and welcome. If it was the fuse, the entire radio wouldn't work. You either have a bad volume switch or there is no power to the switch. Check the wiring for the volume switch. Perhaps, test the wires with a schematic if you don't know which one it is. If it has power, the issue is inside the radio.

Sep 15, 2011 | 2004 Toyota Prius

2 Answers

I own a 1992 GMC Sierra Pickup still with the factory am/fm radio receiver and the seperate cassette player with graphic equalizer. A few years back it started to fail when turning on and now does work at...


I would say the problem is inside the radio itself. I have no idea if anyone repairs these units anymore or if any good used ones are available.

Apr 10, 2011 | 1992 GMC Sierra

1 Answer

2003 Yukon Denali, all radio functions work...just


The built in power amplifier has gone bad and needs to be replaced. You can have the radio repaired, which is cheaper then replacing it. It's common for the OEM radio on the GM to go bad as they draw high current and the heat causes the problem. Good luck and keep me posted.

Jan 12, 2010 | 2003 GMC Yukon Denali

4 Answers

ML320 2003-FM radio not working except by turning the volume to maximum and it can only be heard faintly. The AM, cassette, Cd and phone work fine at normal volume. Any ideas??


i was wondering if you were able to find a solution for this. I am currently having this same problem with my vehicle (as a few others as well). if you could please let me know, id greatly appreciate it. my email is josephelara@yahoo.com.

May 15, 2009 | 2003 Mercedes-Benz M-Class

Not finding what you are looking for?
2011 Jeep Grand Cherokee Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...