Question about 1988 Cadillac Sedan DeVille

Open Question

Need to replace starter

Where is the starter

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Every 6 months must replace starter.


Anon. Do you have to crank the engine over a lot to get the engine started, do you need a tune up? If it a factory stock engine and you are sure it is correct starter and installed properly (with shims if required for meshing gap), makes me think there may be a damaged ring gear on the flywheel/flexplate. Also make sure starter is quality part.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Have to Replace the Starter About Every 6 Months or So What Is
How to Properly Shim Starter
ebay replacement starters avoid them

Apr 26, 2016 | Cars & Trucks

2 Answers

Has power but want turn over


Your starter is in need of replacement. I had a similar problem and replacing the starter corrected it.

Jan 20, 2013 | Cars & Trucks

1 Answer

Need to replace starter in 1991 Buick Lasabre


Your best bet aside from a mechanic doing it would be to use Google, Google something like "Replace starter in 1991 Lasabre" If lucky one of the many car forums or even a video on You Tube will come up .

Dec 15, 2012 | 1991 Buick LeSabre

1 Answer

Starter replacement 2006 PT Cruiser


you need to turn off radio first then remove negative battery cable,then from under the hood,you need to remove air cleaner box cover and remove engine structural collar then you can remove starter electrical connector and starter bolts and starter.

Sep 18, 2012 | 2006 Chrysler PT Cruiser

3 Answers

Starter spins but wont engage, could it be a fuse


HUH??? The electrical circuit is working and you think there is a blown fuse?
NO! there is a MECHANICAL problem with your starter like a broken bendix or a chewed-up flywheel. You need to remove your starter motor and inspect the teeth on your flywheel. Look through the starter hole and turn the engine by hand so you can inspect the teeth all the way around. I usually mark the flywheel with a marking pen before I start turning it so I can tell when I have gone all the way around. If the teeth are all in decent condition, replace the starter. If you find any broken/damaged teeth, you need to pull your transmission and replace the flywheel. (AND probably replace the starter anyway.)

Mar 11, 2011 | Suzuki Esteem Cars & Trucks

1 Answer

Do you have a diagram of the engine of the 2002 Kia Spectra because I need to replace the starter


You don't need a diagram.Lift the car disconnect the battery and the wires to the starter solenoid remove the starter bolts and check the shims placement.Replacement starter is reverse to what is listed in removal

Sep 28, 2009 | 2002 Kia Spectra

1 Answer

Need to replace the starter on the 97 mitsubishi Diamante, how hard is it to remove and replace ?


To replace the starter you need to;
) Note if you have an anti-thief system and now to reset it if the battery is disconnected.
) Note the radio station selections if they are not saved if the battery is disconnected.

Now
) Disconnected the GROUND connector on the battery.
) Disconnect the electrical cable on the battery.
) Remove the 2 bolts holding the starter on. Remove the harder one to reach first.
) Pull the old starter out.
) Insert the new starter.
) Replace the bolt. Insert the easier bolt first.
) Tighten the bolts.
) Replace the electrical cable.
) Reconnect the GROUND connector on the battery.
) Reset any radio, clock or anti-thief systems.
) Return old starter for a core charge refund.

May 25, 2009 | 1997 Mitsubishi Diamante

5 Answers

How do I replace the starter on a 2000 Dodge Intrepid?


Before changing a starter, you need to do some testing. First, check that your battery is holding 12v or better. Next, check that there is 12v at the main connection on the starter. Then chjeck that with the key turned to "start" there is 12v at the small terminal on the starter.If not, check the relay that operates the starter.(it may be bad). If readings are good, and block ground and positive cable is connected and clean, replace starter.
To remove starter, disconnect positive cable from battery, unbolt starter, remove harness. Sometimes removal involves twisting unit and manuvering around stuff that's in the way. If you find that does not work, then remove whatever is keeping it from coming out. Yes: it comes out from underneath. (unless you see an obvious clear path to remove from above there is no set rule, just do what's easier) Replacement is the opposite of removal...no tricks. If your radio has an anti theft code, know it before you start or after you are finished it won't work. You will loose settings though.
good luck

Mar 12, 2009 | 2000 Dodge Intrepid

1 Answer

How do i change the starter on a 1999 sr5 4runner


You'll need basic hand tools to change out the starter. The starter is usually held in place by 2 or 3 bolts. You'll need to make sure you note where the electrical connections go in order to replace them in the correct location following starter replacement. You'll have to get under the vehicle to replace the starter, even so, It shouldn't take more than an hour.

Feb 22, 2009 | 1997 Toyota 4Runner

1 Answer

2005 Escape starter replacement


take the negative side off the battery put the car on ramps secure the rear end so it does not roll and if you need a diagram for removing and installing the starter try autozone

Jan 17, 2009 | 2005 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...