Question about 1991 Isuzu Trooper

1 Answer

Front end grease fittings

Where are the grease fittings

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.

  • Contributor
  • 35 Answers

I replaced all of my joints, ball, tie rods, etc with grease fittings. If you can't see or feel them, there are none. You can try a grease needle that are sold at auto parts stores for cheap. You have to pierce the joints and inject them slowly. Eventually you'll have to replace them with joints that have fittings.

Posted on Apr 04, 2014

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

What are the locations of the grease for the front end of 97 mercury sable..

You most likely don't have any grease fittings. Most front ends are "lifetime lubricated", and they save money by not putting zirc fittings on them.

May 09, 2015 | Mercury Sable Cars & Trucks

1 Answer

How many grease nipples does a ford maverick 1997 2.7td have and were are they located

By 1997 almost all cars were coming from the factory's without grease fittings, they had lifetime joints (haha). The only place you are likely to find any would be the front suspension, ball joints and tie rod ends. Most aftermarket suppliers still produce these parts with grease fittings so there are likely to be some fittings in the front end. Hope this helps.

Feb 21, 2012 | Cars & Trucks

2 Answers

Have 20,000.00 miles on car and the front end makes a creaking noise when turning steering wheel...need to grease but no grease fittings how do you get rid of noise

most newer cars came that way so you cant grease them this way you almost have to buy after market with grease fittings thay get you coming and going the only thing you can try is p-b blast spray it on the parts and hope it works good luck let me no if you need any thing else.

Apr 24, 2011 | 2000 Lincoln Continental

1 Answer

Where are the grease fittings on the front end on my 2004 Pontiac Montana

many vehicles no longer have grease fittings. This does not remove the need for lube, however. When items fail be sure to install aftermarket parts (like Moog) and they will have grease fittings.

Sep 03, 2010 | 2004 Pontiac Montana

2 Answers


Grease fittings don,t come on new trucks anymore
I Have 2005 F 350 and a 1999 F450 and there is no grease fittings

Aug 30, 2010 | 2005 Ford F-150

2 Answers

Is there any grease fittings on the front and rear

There should be some on the front end steering linkage, and some on the drive shaft front and rear, there is none on the rear end.

Jun 10, 2010 | 1993 GMC Jimmy

1 Answer

2000 taurus squeakey front end when you turn the wheel

U have a lack of grease issue with the front tie rod ends, if they are greaseable grease them, if no grease fitting replace them

Feb 28, 2010 | 2000 Ford Taurus

1 Answer

I'd like to grease the front and rear axles but can't locate the grease nipples.

Check the area where the fittings should be.The holes may be plugged, you will have to remove the plugs and install grease fittings.
Hope this is of some assistance.

Apr 18, 2009 | GMC Yukon Cars & Trucks

1 Answer

Grease fittings front end

certain durangos, have the fittings on the ends of the tie rods, and the ball joints, but it is different for 2 wheel drive and 4 wheel drive models... if you do not see the grease fittings on the ball joints, or the tie rods that means they can not be greased... check the boots on them tho, if there is any tearing, or the boot is missing or broken in any way, that part will need to be taken out and replaced...if the suspension part has no grease fitting in place, this indicates it is sealed and doesn't require periodic lubrication

Mar 14, 2009 | 2000 Dodge Durango

1 Answer

Cant find grease sert on front end? 06 ram 2500 4x4.

if there is no fitting it is a "sealed" joint... either drill out a hole in the end and add a fitting for grease.... or when it fails replace it with one that has a fitting. i believe most hardware stores stock grease fittings


Dec 19, 2008 | 2006 Dodge Ram 2500

Not finding what you are looking for?
1991 Isuzu Trooper Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides