Question about 2000 Honda Accord

1 Answer

Drivers side mirror does not go up or down

Goes left and right but not up or down

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 65 Answers

Does it move at all up and down? These mirrors commonly get stuck from not being moved very often. Use your hand to force it up and down. (it will make a grinding noise, no worries, it doesn't hurt the mirror.) Try it again. If it still won't move. Check the other side. if it does the same thing, the master switch is burned out. Otherwise you may need a new motor. (Yes, motor, not the whole mirror. They are available separately) Or just pick up a good used one. Good luck.

Posted on Apr 01, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Power Mirror Wiring Schematic 92 Buick Lesabre 1992 thru 1997 & More


Here is a schematic which my dad & I devised over the course of two hours for the power mirror wiring on our 1992 lesabre, as we couldn't find any wiring info to handle this issue.

http://www.iqmetals.com/else/lesabre/

That's our/my website, and that folder will let you see & get all of the pictures & diagrams

The wiring harness for the power mirror switch was acquired through Rock Auto, and the wire lettering scheme was embossed onto the plastic.
Here's a written breakout of the wires & their locations/purposes.

A= Ground
B= Common Left/Right Motion(Splits to both sides)
C= Common Up/Down Motion(Splits to both sides)
D= Left Side - Left/Right Motion
E= Left Side - Up/Down Motion
F= Right Side - Up/Down Motion
G= Right Side - Left/Right Motion
H= Positive 12V

Now Assuming that all of the power mirrors are wired & color coordinated the same, that would connect....
B -- Light Blue wire of Both Mirrors
C -- Green wire of Both Mirrors
D -- Gray wire of Drivers Side Mirror
E -- Dark Blue wire of Drivers Side Mirror
F -- Dark Blue wire of Passengers Side Mirror
G -- Gray wire of Passengers Side Mirror

In our circumstance we hooked up the power and ground inline with the power window Power(Pink) & Ground(Black) wires which are nearby in the door. The fuse/circuit should easily handle the minor load of power mirrors, even if you were using the windows and mirrors at the very same time... a rarity I do suppose.

647aa8a.jpg
77801ab.jpg
3e90b3f.jpg
f8d21d5.jpg

on Nov 28, 2009 | 1992 Buick LeSabre

1 Answer

How do you determine which wire goes where when you have two 1996 Aurora/Riviera side mirrors, a switch that will operate the mirrors, drivers or passengers, up, down, left and right plus one heater s


use the spare battery and try which wire does what , for safety put a low amp fuse in BOTH pos and neg wires to protect the components and the label the wires as you go

Oct 07, 2014 | Cars & Trucks

1 Answer

Fault finding


On some autos the switch that moves the mirrors needs to be set in the center section vs right or left. On some if its if its to the drivers side and you have it in reverse the mirrors will tilt down.

May 16, 2014 | Citroen Cars & Trucks

1 Answer

Driver window/mirror controls not working correctly


sounds like a worn switch have it changed and yuo'll be less frustrated trying to get the mirror etc how u want it

Apr 22, 2014 | 2005 Cadillac STS

2 Answers

2003 Town & Country Van- trying to replace the drivers side mirror but can't find the plug inside ... please help.


you will need to remove the door panel the connection goes down about 10 inches from mirror,

Aug 07, 2010 | 2002 Chrysler Town & Country

1 Answer

2000 GMC Sierra Power mirrors do not work


sounds like a switch as common error oboth sides unlikely

Dec 31, 2009 | GMC Sierra 1500 Cars & Trucks

1 Answer

Same problem. motor works


adjust your mirror to center with your hand manually and try the switch again. if it still dosn't work switch to the other side mirror and see if the other side goes up/down. if it does then replace the side that's not going up and down....you have to replace the whole assembly. can't just replace motor.

Jul 19, 2009 | 2002 Toyota Camry

Not finding what you are looking for?
2000 Honda Accord Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...