Question about 2003 Citroen C5

Open Question

Pooc8 fault code problems

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A 2002 2.5L Buick, mileage 138000km. Engine fault light, DTC code P0171 what is matter?


According to the experience in the repair, fault code P0171 is used in the fuel system, such as a fuel injector or fuel filter clogging, fuel pressure problems.
The fuel adjustment values measured by GM TECH2, Fault code P0171 is Buick car of a multiple fault. Fault car most can be cleaned by the injector, replacing the fuel filter troubleshooting, also have individual vehicle is to solve the problem by replacing the air flow meter.

Nov 22, 2013 | Cars & Trucks

1 Answer

Pooc8


breather pipe

Feb 28, 2013 | 2001 Citroen Xsara Picasso

1 Answer

1997 honda accord tranmission problem code p0700 drive 4 flashes


Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory.
This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module.

Symptoms Symptoms of a P0700 DTC may include:
  • Malfunction Indicator Lamp (MIL) illumination
  • The transmission may exhibit drivability problems like slipping, etc.
Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely).
Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission.
If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself.

Oct 20, 2012 | 1997 Honda Accord

1 Answer

Citroen c3 error code a17


Hello
The engine and transmission in this cars drive train are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPEDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM

Jul 16, 2012 | 2005 Citroen C3 Pluriel

1 Answer

2005 Kia Sedona Fault Codes


you can try to read the fault codes with ELM327 V1.5 scanner, and know where is the problem, and then you can fix the problem. It is cheap and easy to operate.

Jun 26, 2012 | 2005 Kia Sedona

1 Answer

Check engine code 55 jeep grand cherokee laredo v6 1997. transmission wont shift properly also pulling code 21 and i figured out that one is for the throtle position sensor


These are the fault codes for your Jeep below;

Jeep
11 IGN reference signal.
13 Fault in the map sensor pneumatic circuit.
14 Fault in the map sensor electrical circuit.
15 Fault in the vehicle speed sensor circuit.
17 Engine running too cool.
21 Problem in the oxygen feedback circuit.
22 Fault in the coolant temperature sensor circuit.
23 Air temperature sensor.
24 Fault in the throttle position sensor circuit.
25 Fault in the IAC motor drive circuit.
27 Fault in injector driver interface circuit.
31 Purge solenoid circuit.
33 Fault in air conditioning cutout relay circuit.
34 S/C solenoid circuits.
35 Fault in fan relay circuit.
41 Fault in the charging system or no field current.
42 Fault in the ASD relay driver circuit.
43 Fault in ignition coil control circuit.
44 Battery Temp Voltage.
46 Battery voltage is too high.
47 Battery voltage is too low.
51 Lean condition is indicated.
52 Rich condition is indicated.
53 Internal problem in module.
54 Fault in the distributor high data rate pickup circuit.
55 Completion of fault code display.
62 Unsuccessful attempt to update EMR mileage.
63 Unsuccessful attempt to write to an EEPROM location by the controller.
76 Fuel pump resistor by-pass relay circuit

Mar 08, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Car won't start. Error codes - p1000, p0452, p1642


The following results can be found on http://www.blujag.co.uk and would appear to indicate a fuel system problem. hope this helps
Fault Code P0452
Indicates a Generic Power-train fault
The fault is generally due to a problem in the Emission Control area
Fault Description: Evaporative Emission Control System Pressure Sensor Low Input
Fault Code P1642
Indicates a Manufacturer Specific Power-train fault
The fault is generally due to a problem in the Computer & Output Circuit area
Fault Description: Fuel Pump Monitor Circuit High Input

Jul 16, 2010 | 2003 Jaguar Xkr

1 Answer

Check engine light is on


Take it to a local autoparts store and ask them to read the engine fault codes. Fault codes will help determine where the problem is. Reading fault codes is usually a free service.

Also make sure that your gas cap is tight as a loose gas cap can cause the check engine light to be turned on.

Please report here as to what fault codes you have and what problems you are having with the operation of your vehicle.

Thanks

Bob

Nov 10, 2009 | 2001 Lincoln LS

Not finding what you are looking for?
2003 Citroen C5 Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...