Question about 2000 Suzuki Grand Vitara

Open Question

Tow bar sidelight fuse location

Trailer side lights not working, vehicle lights ok. No power at socket.

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Relay and module


I think you might be talking about the "Trailer Lighting Converter" or the "Tow Ready" Tail Light Converter, or they may call it a trailer light module. This module plugs into the vehicles OEM harness. If this failed then you could have such symptoms. But they could also be talking about the "Trailer Light Socket" (your trailer electrical plug plugs into this socket). I hope this helps. If not try to give more details. Good luck.

Mar 11, 2014 | 2004 Dodge Ram 1500

3 Answers

Tail lights on trailer not working f250


did you check the trailer /tow fuse under hood in truck? located lfet side rear near firewall top. should be fuse for towing / trailer.DW Mylin

Dec 01, 2012 | 2008 Ford F 250 Super Duty 4WD

1 Answer

Instructions for wiring a moving trailer connector


accessconnect_logo.jpg


Trailer Wiring Diagrams 4 Way Systems

4 way flat molded connectors allow basic hookup for three lighting functions; right turn signal / stop light (green), left turn signal / stop light (yellow), taillight / license / side marker (brown) and a ground (white).

4%20way%20wiring.jpg 4way_vehicle.jpg 4 way tow vehicle side.
4way_trailer.jpg 4 way trailer side.
5 Way Systems

Same as 4 way system listed above but adds a extra blue wire for brake signal or auxiliary power. Used on pop up camper trailers or utility / boat trailers.
5way_vehicle.jpg 5 way tow vehicle side.
5way_trailer.jpg 5 way trailer side.
6 Way System, Rectangle Plug 3/4 inch by 1 inch 6 way rectangle connectors right turn signal (green), left turn signal (yellow), taillight (brown), ground (white). The red and blue wire can be used for brake control or auxiliary. Use on a small motorcycle trailer, snowmobile trailer or utility trailer. Can also be used as custom wiring on trailers with 3 light/wire systems. See "Tow Vehicle Taillight Wiring" below.
6way_rectangle_1.jpg 6 way tow vehicle side.
6way_rectangle_2.jpg 6 way trailer side.
6 Way Systems, Round Plug

Round 1 1/4" diameter metal connector allows 1 or 2 additional wiring and lighting functions such as back up lights, auxiliary 12v power or electric brakes. Note: The black (sometimes red) 12v and blue electric brakes wire may need to be reversed to suit the trailer. Check with a test light or VOM. Uses: horse trailer, travel trailers, landscaping trailer, car trailer, etc.


6way_vehicle.jpg 6 way tow vehicle side.
6way_trailer.jpg 6 way trailer side.
7 Way Systems

Round 2" diameter connector allows additional pin for auxiliary 12 volt power or backup lights. Uses: heavy duty landscaping trailer, car trailer, boat trailers, horse trailer, travel trailer, construction trailer, etc. Check with a test light or VOM.


7way_vehicle.jpg 7 way RV flat blade tow vehicle side.
7way_trailer.jpg 7 way RV flat blade trailer side.

Jan 01, 2011 | 2001 Pontiac Montana

1 Answer

I tow an enclosed trailer with my 2002 freelander and the brake lights don't work on the trailer. I have the proper connector which works fine for the turn signals, the hazard flashers and the overall...


If the Brake light filaments in the globes are OK then you could have a bad connection some where in the brake light circuit from where the trailer connector cable is tapped into the vehicle wiring loom.
Start by disconnecting the trailer connector and checking on the vehicle socket for an indication that voltage is present by using a multimeter or test lamp while the brake pedal is pressed. If not OK, then the fault is either where the brake light wire is screwed into the socket or the connection in the vehicle wiring loom.
If OK then reconnect trailer plug and after removing cover, check the trailer plug where the brake light wire is screwed into it. If OK, then check where wire is connected at trailer lamps. If not OK, then there is a broken wire in the trailer cable.

Sep 27, 2010 | 2002 Land Rover Freelander

2 Answers

Running trailer lights not working, but brake


Did you check the fuse for the trailer tow adapter paring lamps ? This is a separate fuse powered by a relay, it is not the same circuit as the truck's parking lamps.
This is fuse # F10 & The half size ISO relay, R201 in the fuse panel in the passenger side kick panel.
This is based upon being a new body style 2004, not the 2004 Heritage or Lightning models, those are different fuse & relay locations.

Jun 05, 2010 | 2004 Ford F150

2 Answers

I have a 2008 Ford F 150 with factory installed trailer wiring. I bought a trailer plug tester. It shows the tail light function to be dead. Brake lights, turn signals all work. Any ideas?


The trailer tow adapter parking lamps is fuse #10 in the cab fuse panel. There is also a trailer tow parking lamp relay that powers them, which could have a problem as well.
Start with the fuse, and maybe check both the 7 pin and the 4 pin for the parking lamps, could be a corroded pin on one of them causing the tester to not see the power on the pin.

Dec 17, 2009 | 2008 Ford F 150 2WD

1 Answer

No power to tail light on trailer- 2004 Dodge durango factory tow


If this is a factory light harness for the trailer hookup on your Caravan. Look under the hood for a fuse box. Many 2000+ vehicles have this with separate fuses just for the trailer lights.

Jun 10, 2009 | 2005 Dodge Caravan

2 Answers

I only have taillights coming out of the trailer plug


so, the trailer has no brake lights, or turn signals, just tail lights? Everything (all lights) on truck work ok? What do you have for trailer wiring hook up 4, 5, 6, or 7 way? There is no fuse, the lights all work off the tow vehicle lights, so if the tow vehicle lights all work properly, it's probably a wiring problem, such as bad grounds, loose connections, etc. Get a volt meter and check voltage at truck plug to see if power is getting that far. If truck plug in is ok, wiring problem is the trailer. Make sure all grounds are tight and rust free, that's a common problem.

May 20, 2009 | 2004 Chevrolet Silverado

2 Answers

Trailer towing fuses


Battery junction box (BJB) fuse(s):
  • 5 (30A) (trailer electric brake controller)
  • 34 (25A) (trailer tow turn relays)
  • 42 (30A) (trailer tow parking lamps)
  • 44 (30A) (trailer tow battery charge relay switch side)
  • 63 (15A) (trailer tow reversing lamps

Mar 20, 2009 | 2008 Ford F 250 Super Duty 4WD

6 Answers

Trailer wiring for 2005 Ford Escape without factory tow package


I had the sam problem with my '02 escape when I installed the hitch. I changed the turn signal relay under the dashboard on the drivers side of the dash with one from an escape that had a tow package(one was blue and the other was yellow...). worked fine for me after that. Don't know if it changed later...

Oct 17, 2008 | 2005 Ford Escape

Not finding what you are looking for?
2000 Suzuki Grand Vitara Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...