Question about Kia Spectra5
How do you program a 2006 kia spectra5 keyless entry key fob? my mother in law broke hers.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1. Close and lock all doors with the driver’s side power lock/unlock switch.
2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.
3. Insert key into the ignition cylinder and turn to the ACC position.
4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.
5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).
6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.
Posted on Nov 16, 2009
Seating in the drivers seat , make sure all doors are closed.Insert key into ignition, don't turn on yet.
Wait for the dome light to go out, then press and hold the door unlock button , make sure it is UNLOCK, while turning the key ON OFF ON OFF Twice , do not engage the started, just on to the point of being on. Release the unlock button,and your doors should lock, then unlock indicating programming mode.At this point hold down both the lock and unlock button on the key fob. After 30 seconds your locks should lock and unlock, indicating the fob is programmed. This must be repeated for all remotes, whether or not it be new or old. After all remotes are programmed, turn the key off and on again to exit programming mode.
Posted on Dec 14, 2012
If you open trunk and look on inside of trunk where hinge bolts are you will see code numbers . Owners manual will tell you how.
Posted on Sep 17, 2009
SOURCE: honda ridgeline key fob program
If it is a factory keyless system than you do need it done by the dealer, but if it is an after market system then reply back with manufacture and model.
Posted on Oct 17, 2009
Tips for a great answer:
Mar 28, 2017 | 2009 Kia Sedona
Dec 01, 2015 | 2007 Chevrolet Impala
Nov 01, 2015 | Cars & Trucks
Feb 08, 2014 | Mitsubishi Cars & Trucks
Aug 03, 2012 | Toyota Cars & Trucks
Nov 28, 2011 | 1998 Toyota Camry
Apr 19, 2009 | 1999 Chevrolet Silverado 1500
Apr 11, 2009 | 2006 Toyota Tacoma
May 13, 2017 | 1998 Volvo V70
132 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: