Question about 1995 Jeep Wrangler
When its cold my jeep wont start at all I tried starting fluid and nothing. As soon as u put jumper cables on it, it starts first crank.
Test battery sounds like enough to turn truck over but not start also check the connections for loose or corrision
Posted on Mar 31, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it most definately is the crank shaft sensor. same exact prob i had. it costs about 60 bucks and 3 minutes to replace yourself. one bolt holds it into the transmission bell housing and one connector wire. very simple fix. call off the wrecker. just have plenty of ratchet extensions available i had to go in from behind the transfer case to reach the bolt but it was still pretty simple to install.
Posted on Jan 29, 2009
see if your engine has a ECT sensor (temp sensor that delivers information to your ECM) they are installed on the intake side of the cylinder head, it usually has 2 cables, have it checked replace if necesary
Posted on Nov 19, 2009
Before blaming the starter make sure the battery is fully charged. It should be around 13V.
Starter circuits for the most part operates in the following way. Turning the ignition key supplies power to a relay situated in the engine compartment which in turn activates the solenoid on the starter which powers the starter itself.
Make sure your vehicle is in Neutral(Manual gearbox) or Park(Auto box) Locate the starter motor. On the starter there is another cylinder like object called the solenoid. There is a thick red wire running from the battery connected to this. There is also a much thinner wire which activates the solenoid. To test the starter run a wire from the + on the battery to where the thin wire connects on the solenoid. (ignition must be off) This should activate the starter and turn the engine. If nothing happens the starter is probably at fault. Before removing the starter make sure that the engine is properly earthed as this could also give problems.
If the starter does kick in the problem is further "upstream" Most probable cause would be the relay. If you can locate it, replace since it is relatively cheap.
Starter repair is best left to the experts. Get a quote for a new starter before you have the old one repaired. You'd be surprised at how many times it turns out that replacement costs the same as repair.
Let us know if you've solved the problem.
Posted on Dec 10, 2009
Tips for a great answer:
Feb 12, 2018 | Jeep Cars & Trucks
Feb 03, 2016 | Jeep Cars & Trucks
Jun 07, 2017 | 1995 Jeep Grand Cherokee
Sep 04, 2010 | 1995 Jeep Wrangler
Apr 18, 2010 | 1995 Jeep Wrangler
Mar 02, 2010 | 1995 Jeep Wrangler
Dec 25, 2009 | 1995 Jeep Wrangler
Oct 29, 2009 | 1995 Jeep Wrangler
Jan 31, 2009 | 1995 Jeep Wrangler
Jun 25, 2014 | 1995 Jeep Wrangler
150 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: