Question about 1990 Chevrolet K1500

1 Answer

How to lift a 1990 chevy silverado

IM WONDERING HOW TO LIFT MY 1990 CHEVY SILVERADO. WHAT PARTS DO I NEED AND HOW MUCH IS IT GOING TO COST ROUGHLY? WHAT SITES ARE BEST TO BUY LIFT KITS FROM? THANKS!

Posted by on

  • john h Mar 31, 2014

    sorry had brown out in area fabtech is 800 /pro comp 6 w/shocks 1800 some of these kits are bolt in others require some modifications and use of a welder so check with the kits that you are able to do with your level of expertise and available tools

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 12,650 Answers

Depending how high a lift 2"is a couple of hundred and wont affect ride or drivetrain 3" and up u start messing with alignment,steering ,driveshafts,cv axles brake lines etc 4" and above lift will be above $3,000 if done correctly because of all the changes that need to be done some kits like rough country sell 7" for $1399 -skyjacker 6"--$1499===fabtech 4" buget w/sh

Posted on Mar 31, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
shaggyrat
  • 1224 Answers

SOURCE: chevy truck headlights

yes there are 2 align bolts looks like backward hex's
or philip head one on top and one on out side parameter of lite

Posted on Jun 10, 2008

fastboyz
  • 674 Answers

SOURCE: 1994 Chevy Silverado

d2f5142.gifi hope this is what you are looking for
good luck
paul

Posted on Nov 17, 2008

keemo68
  • 1263 Answers

SOURCE: where is the dimmer switch

the dimmer switch is located in the steering column and is a part of the turn signal module. you must remove the steering wheel,column cover to remove the turn signal/dimmer switch module.

Posted on Apr 17, 2009

Jim1969pa3
  • 152 Answers

SOURCE: I have a 1999 chevy silverado and I need to change heater core

Not a whole lot different. Just need to keep removing plastic down at the heater until you get to the heater core. Then disconnect it on the firewall side.

Posted on Dec 22, 2009

  • 146 Answers

SOURCE: need vacuum line diagram for 1990 Chevy Silverado

The vacuum diagram for the truck should be printed on a factory sticker right next to the hood latch inside the engine compartment. If its missing or ruined you could try looking inside a Chilton or Haynes manual.

Posted on Feb 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver door on 2000 chevy Silverado hangs down. Solution


There is adjustment in the bolts of the door hinges of the door pillar sections. Und slightly and lift the door to the correct height and re-tension the bolts, However if you can lift the door without loosening the bolts then there is excessive wear in the hinge pins and the only solution is to replace the hinges.

Sep 28, 2013 | 2000 Chevrolet Silverado

2 Answers

I have a '95 Chevy Silverado 2500 7.4L 2wd, I seem to be going through ball joints rather quickly. I replace them at least once a year. Is this something that is problematic with this model or is


Many other users are noticing problem issue with ball joints.Always replace original parts instead of aftermarket parts.They dont last long.--------Before replacing ball joints ,i suggest to test and inspect the ball joints:----Click the link below for its procedure:----Upper Ball Joints inspection and replacement? http://howtobyme.blogspot.in/2012/02/upper-ball-joints-inspection-and.html How to Test Upper and Lower Ball Joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-test-lower-ball-joint.html How to inspect Upper and Lower Ball joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-inspect-lower-ball-joint.html How to Service Ball Joints on Car? http://repairhelpcenter.blogspot.com/2011/12/how-to-service-lower-ball-joints-on-car.html How to Replace Ball joints? http://repairhelpcenter.blogspot.com/2011/12/how-to-replace-lower-ball-joints.html Lower Ball Joints replacing on Mitsubishi car? http://howtobyme.blogspot.in/2012/02/lower-ball-joints-replacing-on.html
--------This will help.Thanks.

Feb 08, 2012 | 1995 Chevrolet Silverado 2500

2 Answers

Location of wiper motor 1999 chevy silverado


under hood drivers side on fire wall between engine and brake master cylinder take off wiper arms slide tab at bottom lift off -- un- screw cowl the cowl is in 3 parts -unscrew center with hood closed first the screws are recessed about an 1-1/2 below the top of cowl open hood and unscrew the both sides of cowl and remove than remove center watch the washer hoses now will have access to the wiper transmission mark where transmission is before unbolting motor and transmission remove motor install is in reverse

Feb 10, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

What is the stock camshaft in a 1984 chevy K10 pickup?


If you call a NAPA auto parts store and give them the engine size and make and model,They can give you that info.

Nov 17, 2009 | 1983 Chevrolet Silverado

1 Answer

2007 chevy silverado 2500 hd duramax shut down


mo me it sounds like low fuel volume i would check my lift pump

Sep 30, 2009 | 2007 Chevrolet Silverado 2500HD

1 Answer

How do I raise the bed on a 2007 chevy silverado


8 bolts...4 on each side witht he frame rails. 3 screws inside fuel filler door.
from underneath...back by the driver side tailiht area you should see a wiring juntion block with i believe 3 connectors...disconnect those. you may also have to loosen or remove the rear bumper for the lower part of the bed to clear. then all u gotta do is gently and evenly lift it off9 with assistants mind you(extra bodies)

Jul 19, 2009 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

How do i fix loose drive side side mirror on a 1990 Chevy silverado 1500?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jun 29, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Chevy silverado power steering


The power steering pump shaft may have broken inside the pump. I have seen this happen on a these trucks. Have your pump checked.

Mar 03, 2009 | 2000 Chevrolet Silverado 1500

1 Answer

Remove door panel


Remove the screws and lift up. There aren't any screws behind the window switch, it is screwed on from behind. There is a hidden screw behind the lock slider.

Mar 01, 2009 | 2000 Chevrolet Silverado

1 Answer

Change drivers side door panel on 94 chevy p.u.


unscrew the inside handle and pop of the window arm....then slowly work your way around the panel poping loose the plastic rivits on the inside edge...lift panel upwards to unhang it from window lip...thats the plastic panel...the metal panel inside that is pretty self explanitory..unscrew and take off the clips holding the controle arms to it and remove...do use caution as parts are very sharp and will slice your fingers and hands.

Jan 21, 2009 | 1994 Chevrolet Silverado 2500

Not finding what you are looking for?
1990 Chevrolet K1500 Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...