Question about 1992 Chevrolet G20
Is there an in-line fuse to the wiper motor and if so where is it located?
Some of those have a wiper control circuit board that will cause them not to work,or not work properly
Posted on Mar 31, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: chevy cavalier 1997 wiper motor
It could be a fuse problem. The fuse box is located on the left side of the dash. It can be found with the door open and looking at the end of the dash. There is a small cover that when removed has a chart of what all the fuses go too. If the fuses proves to be good, the motor can be found under the hood (sort of).
To get to the wiper motor you will need to remove the wiper arms and then you will need to remove the black vent cover to get at it. It is only held in by five black panel clips. Once you have removed the clips and removed the wiper arms and the washer lines, lift up the cover and slide it out. Note: it comes out much easier than it goes back in. With the cover off, the wiper motor will be visible on the drives side of the car. Remove three screws (10 mm) and th entire assembly comes out. flip it over to see and depress the clip that holds the wiring on. You should be able to take it out and put it back in about 30 minutes. Try to do it on a warm day so that when you are reassembling it, you do not tear up the rubber seal around the windshield. I got the entire unit from my local junk yard for 30 bucks.
One more thing to consider as a possible problem is the wiper joystick in the car.
Hopefully it is only your fuse.
Posted on Jan 25, 2009
SOURCE: wiper motor stopped working. I
Wiper motors usually do not have a relay, they are operated directly from the switch. Before you look at wiring, check the fuse, wiper motors are notoriously reliable and something like a switch will go long before the wiper motor. The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the wiper fuse it should be around 15 to 20 amps.
Posted on Mar 15, 2011
when you turn on the wipers do hear anything if not check to see if there is power to the wiper motor if you do hear it maybe a striped or brocken wiper arm. good luck
Posted on Dec 12, 2012
Tips for a great answer:
Jun 24, 2017 | Cars & Trucks
Jun 12, 2017 | Ford Cars & Trucks
Apr 02, 2017 | Oldsmobile Cars & Trucks
Feb 21, 2017 | Jeep Cars & Trucks
Mar 11, 2016 | Nissan Cars & Trucks
Aug 02, 2015 | 2009 Chevrolet Chevrolet Cobalt LT
Jun 06, 2013 | 1983 Chevrolet Celebrity
May 20, 2017 | 2001 Honda Civic
60 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: