Question about Cars & Trucks
Won't crank or won't start? If all you did was change the plugs, chances are the plug wires got crossed up. You didn't state the size of your engine. On the 5.2 and 5.9 engine the firing order is 1-8-4-3-6-5-7-2. If this is not your engine size. Just google the firing order for your engine size.
Posted on Mar 31, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove two bolts holding caliper on and pull up as hard as you can on the caliper. Wiggling back and forth at the same time helps.
Posted on Aug 02, 2008
click on this link, and scroll down to 5.7L
Posted on Dec 22, 2008
Open up the tail gate, you will see two torque screws on the inside beside the tail lights. take these out, this will free up the housing and you can change it from there.
Posted on Feb 01, 2009
very easy take the mirror inside cap off if you can not get to the 3 bolts then you will have to take trim panel off to take trim panel off look for plastic caps take them out and unscrew them then pop out the bottom of the door and pop the sides out then lift up and out should be loose enough for the bolts now/ 10mm bolts 3 Please rate my response thank you very much
Posted on Feb 02, 2009
Tips for a great answer:
Mar 30, 2016 | 2004 Dodge Ram 1500
Jan 27, 2016 | Cars & Trucks
Nov 16, 2014 | 1996 Dodge Ram 1500 Club Cab
Feb 27, 2013 | 2004 Dodge Ram 1500
Feb 21, 2013 | 1998 Dodge Ram 1500 4WD
Mar 20, 2012 | 2004 Dodge Ram 1500
Mar 11, 2011 | Dodge Pickup Cars & Trucks
Jan 07, 2011 | 2008 Dodge Ram Pickup 1500
93 people viewed this question
Usually answered in minutes!