Question about 2004 Kia Sedona

1 Answer

There is no sound when I try to start the engine

When turning the key there is no sound and does not start at all

Posted by Anonymous on

  • Anonymous Mar 30, 2014

    help

  • bruno Mar 31, 2014

    if battery ok, then check starter motor, locate it and knock it, if doesn't help, need new one

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 115 Answers

Battery ok?check harness.

Posted on Mar 30, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I reset the alarm on a 2005 hyundai Santa 2.4l


Not sure about yours, but many will reset by: turn key to "on" and wait 15 minutes or so; shut off, then try to start.

Apr 15, 2016 | Hyundai Cars & Trucks

1 Answer

Engine turns over but will not start. warning light is on, car with a key on it


Sounds like the anti theft system/ immobilizer. Try cleaning out the ignition tumbler by squirting carb or engine or brake or electric cleaner into the key hole.

Dec 29, 2013 | SsangYong Rexton Cars & Trucks

1 Answer

2005 sts wont start or turn motor got new battery and try to start and kills the whole power


It sound like you have a bad ground, what will happen if this is the case is you put you key in the ignition and turn to run "not starting the engine" and everything is on and bright, when you try to turn the engine over it will click once "just when the key hits the start position" and everything will shut off lights and all. if you take the key out and do it again it will produce the same results.

Dec 10, 2013 | Cadillac STS Cars & Trucks

1 Answer

Engine wont turn over and start


Bad ignition switch not the key switch the ignition switch i would check that first.Then the key switch.

Dec 12, 2012 | 1992 Mitsubishi Mighty Max

1 Answer

I have a 96 pontiac grand am that doesnt start all the time


Starting Problem # 1: Engine Won't Crank At All

Scenario: You turn the key, but nothing happens: And by nothing, we mean there is no dash light, no sound, nada. The first thing you should do in this case is to pop the hood and check the battery. Either the battery is completely dead or there's a wiring problem in the starting system. Try jump-starting the battery. If that doesn't work, you'll probably have to call for assistance.

Scenario: When you turn the key, you hear a rapid clicking sound, and the dash lights dim. This is your classic low-battery symptom. Jump-starting the battery should get the engine to start.However, if you keep experiencing this problem, you could have a bad battery or alternator, or it could be some­thing as simple as a loose alternator belt. Take your car to a mechanic just as soon as you can.

Scenario: When you turn the key, the lights on the dash come on, but you don't hear anything. Make sure you have the shift selector all the way in park. Move it out of park and then back, or try starting it with the shifter in neutral. If your car has a manual transmission, make sure you have the clutch pressed all the way to the floor. If that doesn't help, you can try jump-starting the battery, but it probably won't work. There's a good chance your car has a bad starter or a problem in the starting circuit. That could mean a prob­lem in the ignition switch, neutral safety switch or starter sole­noid.

Scenario: The dash lights come on when you turn the key, and then go right out, and the engine doesn't crank when you turn the key to start, But, the lights slowly come back on when you release the key. This is another classic: the bad battery connection. When you turn the key to start, the starter pulls so much current that it breaks the connection. Then, when you release the key, the connection slowly comes back. The connection provides enough power to turn the dash lights on, but not enough to crank the starter. Cleaning and tightening the battery terminals may fix this prob­lem.

Scenario: When you turn the key, you hear a single, hard clunk. Turn the headlights on and try again. Do the lights dim slightly when you turn the key? If so, you probably have a bad starter or a seized engine. If the headlights don't dim at all, or just barely dim, there may be a connection problem between the starter solenoid and the starter itself.

Scenario: When you turn the key, you hear a loud, scraping or grinding sound like metal on metal. The starter drive is bad, or the ring gear on the flywheel damaged, or both. You may get the starter to engage if you try turning the key a couple of times, but let go of the key right away if you hear the noise again. If the car does start, you should drive it right over to local repair shop and have the problem fixed.

Starting Problem #2: Engine Cranks but It Won't Start

Scenario: The engine seems to crank normally, but the engine doesn't even sound as if it's trying to start. Is there gas in the tank? Gas gauges are notoriously inaccurate. If you have to move your head to one side to get the needle to move off empty, try adding some gas to the tank.

Scenario: When you first turn the key on, you don't hear the fuel pump run. In cars with electronic fuel injection, you should hear a light hum a few seconds from around the fuel tank. That's the electric fuel pump running. If you don't hear the fuel pump run for a couple seconds when you first turn the key on, try cranking the engine until the oil light goes out. That may start the pump running and allow the engine to start.

Scenario: The engine cranks normally, and it sounds like it wants to start, but it won't. You may have flooded the engine. Hold the gas floor and try again. (Let the gas pedal up when it finally starts). If it's raining out, the ignition system may be wet.

Scenario: The engine cranks unevenly in a repetitive-sounding pattern. You may have a bad timing chain or timing belt. Call a tow truck and have it towed to the repair shop.


Starting Problem # 3: Engine Starts but It Shuts Off

Scenario: The engine starts right up, but shuts off as soon as you release the key. This is the classic symptom of a bad ignition switch. A new switch should fix it.

Scenario: The engine starts and runs, but when you put the transmission in gear, the car lurches and the engine shuts off. The converter clutch in the transmission torque converter probably is engaging when it shouldn't. On some cars, you can bypass this by disconnecting the torque converter clutch solenoid; but unless you know which wire to pull, forget about it. Call for assistance.

Scenario: The engine starts and runs, but seems to idle slowly and stalls when you come to a stop. This probably is a fast idle problem. When the engine is cold, it's supposed to idle a little faster than normal to keep the engine running. You may be able to drive using two feet until the engine warms up: one on the gas to hold the idle up a little and the other for the brake. However, don't keep driving it this way. Take your car to your repair shop just as soon as you

Jul 21, 2011 | 1996 Pontiac Grand Am

2 Answers

My car won't start. It sounds like it wants to turn over, but doesn't. I had a mobile mechanic come out and troubleshoot the problem. He hooked some type of reader to my car. Two codes came up. "P1631...


You might try to reset the computer. Here is the way you do it.

Turn the key to the ON position.
Then press the gas pedal all the way to the floor and let all the way off 3 times.
Then turn the key off. The next time you turn the key on it will have reset the computer. Not too sure if it will reset those codes. But it is free and worth a try!

Hope this helps you!!! If so please check YES! Thanks!

Sep 01, 2010 | 1997 Oldsmobile Cutlass

1 Answer

2004 Toyoya Sienna, I can't start the engine. I


Sounds like you have a faulty Steering lock. Try wiggling the steering whell while turning the key, also make sure gear shift is park.

Nov 29, 2009 | 2004 Toyota Sienna

2 Answers

1999 Toyota Corolla CE. For about 2 months, the engine does not start immediately. I need to turn the ignition key several times until it starts. Each time when I turn the key, a clicking sound happens...


it sounds like either your having a short at the starter or the ignition switch is bad, I am leaning towards the issue being the starter, usually when the ignition switch is going bad there will be no click,

Oct 06, 2008 | Toyota Corolla Cars & Trucks

Not finding what you are looking for?
2004 Kia Sedona Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...