Question about Cars & Trucks
It can be a number of problems would need more info but well go with the most common need to check fuel pressure if low poss cause fuel filter clogging or fuel pump inline clogging the fuel filter is usually the problem with most stall loss of power ---if good while running check the exhaust if it feels like is choking out or low than possible cat converter clogging ---if good than check throttle body my be clogging ir need repair ---if good check egr valve my need cleaning or replacement the egr valve gets clogged with carbon also check or replace air filter these are the few most common problems that can cause a performance problem
Posted on Mar 30, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1994 Topaz engine stalling
Normally this kind of a problem is a fuel block...there so many other ways to block...other than the filter
PLEASE don't forget to RATE ME (FIXYA) for my help..........
Posted on Aug 15, 2008
SOURCE: no acceleration at high RPM's
It's probally the fuel cutoff.If it's in Park Or Nuetral this is a normal condition to protect the engine from overevving.If it doesn't do it in gear that's what it most likely is.hope this helps
Posted on May 16, 2009
Most likely it is running too ritch. should be around 7%. Mine did ecactly the same thing and I had several things done . Had the throttle body cleaned and installed a O2 senser.runs great now.
Hope this helps
Posted on May 28, 2009
sounds like you have some bad injectors. if your smelling fuel it sound like one of them are stuck open. that would cause it to run rough. i think the injectors are like 35 each i would put them in and run a fuel system cleaner and put a new fuel filter when you do all that.. if you do it yourself it should run you about 180 to 200. Its not that hard to do. If a shop was to do it it could cost up to 500
Posted on Jun 27, 2009
Tips for a great answer:
Apr 09, 2015 | 2005 Buick Century
Mar 30, 2014 | Cars & Trucks
Dec 11, 2013 | 2001 Peugeot 206
Mar 28, 2013 | 1995 Saturn Sl
Jun 04, 2011 | 1998 Ford Escort
Apr 02, 2011 | 1998 Saturn SL
Jan 06, 2011 | 1995 Saturn Sl
Jun 01, 2010 | 1998 Saturn SL
Dec 30, 2009 | 1995 Jeep Grand Cherokee
Sep 08, 2009 | 1997 Saturn SL
Jul 21, 2018 | Dodge Cars & Trucks
58 people viewed this question
Usually answered in minutes!