Question about Hyundai Accent
Where do I fill it at
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: HYUNDAI TRANSMISSION
1. Drive the vehicle until the fluid temperature reaches normal operating the usual temperature [80-90°C (176-194°F)]. 2. Place the vehicle on a level floor. 3. Move the selector lever sequentially to every position. This will fill the torque converter and hydraulic system with fluid, then place lever in "N" (Neutral) position. 4. Before removing the dipstick, wipe all contaminate from area around the dipstick. Then take out the dipstick and check the condition of the fluid. The transaxle should be overhauled under the following conditions. a. If there is a "burning" odor. b. If the fluid color has become noticeably blacker. c. If there is a noticeably excessive amount of metal particles in the fluid. 5. Check to see if the fluid level is in the "HOT" range on dipstick. If fluid level is low, add automatic transaxle fluid until the level reaches the "HOT" range. Transaxle fluid: GENUINE HYUNDAI ATF SP-II, DIAMOND ATF SP-II or AUTRAN MMSP-II. Low fluid level can cause a variety of abnormal conditions because it allows the pump to take in air along with fluid. Air trapped in the hydraulic system forms bubbles which are compressable. Therefore, pressures will be erratic, causing delayed shifting, slipping clutch and brakes, etc. Improper filling can also raise fluid level too high. When the transaxle has too much fluid, gears churn up foam and cause the same conditions which occur with low fluid level, resulting in accelerated deterioration of automatic transaxle fluid. In either case, air bubbles can cause overheating, and fluid oxidation, which can interfere with normal valve, clutch, and servo operation. Foaming can also result in fluid escaping from the transaxle vent where it may be mistaken for a leak. 6. Be sure to examine the fluid on the dipstick closely.
Posted on Jun 30, 2008
SOURCE: Where is the manual transmission
It's usually on the transmission itself. Look on the bottom and you should see a drain bolt. Look above that, on the side of the transmission, and you'll likely find the fill bolt. You put it in until it starts to spill out of the hole - that fill hole is positioned at the FULL point for the fluid.
Posted on Aug 12, 2008
This would be a major engineering job, it would be time consuming and very costly if new original parts were to be used and i suspect it would invalidate your warranty.
Would it not be better to trade in your car for an automatic version?
Posted on Nov 05, 2008
Go to hyundaiusa.com and then click on OWNERS on their menu bar. Then create a new account for your specific Hyundai vehicle year and model. Once you successfully log into your account, under the My Vehicle page you should see an underlined link labeled "Owners Manual". Clicking on this link, you will then be able to download a complete PDF version of the original owners manual.
Posted on Apr 27, 2009
the fill plug will be on the side of transmision.where axle come out transmission. get a haynes manual because it can be helpful.
Posted on May 20, 2009
Tips for a great answer:
Jan 05, 2016 | Hyundai Cars & Trucks
Jul 19, 2014 | 2012 Hyundai Accent GS 4dr Hatchback 1.6L...
Apr 14, 2014 | 2000 Hyundai Accent
Oct 31, 2011 | 2001 Hyundai Accent
Jul 24, 2011 | 1999 Hyundai Accent
Feb 02, 2011 | 1997 Hyundai Accent
Aug 01, 2010 | 2000 Hyundai Accent
Apr 20, 2009 | 2002 Hyundai Accent
Aug 12, 2008 | Hyundai Accent Cars & Trucks
Sep 20, 2017 | Hyundai Cars & Trucks
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: