Question about 2005 Dodge Grand Caravan

1 Answer

Dtc 0700 jerks when shifting from reverse to drive

My 05 caravan has trouble code p 0700 and jerks when shifting from reverse to drive. seems to shift fine the rest of the time and also fine when going from park to drive.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 290 Answers

The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transaxle controls.
Read more: http://engine-codes.com/p0700_dodge.html#ixzz3Pn5lTBcI

Posted on Jan 25, 2015

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 635 Answers

SOURCE: 2001 dodge caravan 3.3l v6 dtc 0700 & 0740

If it ran out of gas you may have sediment in the fuel lines causing rough running which may trigger a transmission code due to improper vacuum due to the rough running.

Posted on Mar 31, 2010

tse22
  • 103 Answers

SOURCE: My 2001 dodge caravan isn't shifting into

The transmission is probably shot. the only other thing could be dirty linkage if you mean "hard" as in hard to move the shift lever. The first thing I would do is get a tranny fluid and filter change.

Posted on Aug 03, 2009

ZJLimited
  • 17970 Answers

SOURCE: 98 dodge grand caravan. p700

P0700 - Transmission Control System Malfunction.
The code basically what that means is that a malfunction has been detected in the transmission and associated components. There is good news and bad news. The good news is it might be covered under warranty. You didn't say if your vehicle is still under warranty, be aware that you may still have warranty coverage on this since your car is just 3 years old. The bad news is that the P0700 code really means that there are transmission-specific codes that you can't access with a regular code reader. There is a part called a TCM - transmission control module that works in a similar way to your PCM. The TCM handles the transmission electrical "stuff" and it stores further transmission codes.

If you want to pursue the issue yourself, you'll need to get your hands on a higher end code reader, or take it to the dealer or a transmission shop to get the actual transmission trouble codes read. Personally we recommend you get a shop to read those codes for you. The other codes are communication codes, we recommend you clear those codes after you fix the P0700 code and see if they come back, they could be related to the "main" transmission issue. The other good news is the fix for this may just be a software update that the dealer can do.


P1728 - Transmission Slip Error
THis code indicates that the transmission is slipping. When the computer that controls the transmission detects a fault code like P1728, it will put the transmission into a "limp" mode. When the code is cleared and the transmission will function properly until the slippage occurs again. To resolve this problem, you will need to get your transmission overhauled.

Hope help with this.

Posted on Aug 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My car is stuck in limp in mode I have replaced speed sensor and I'm getting p 0700 it's a 02 stratus I was told if I have the codes reset that the car should shift correctly


Incorrect information the code is because of a system malfunction and that is what is causing the shift problem. Resetting the code does nothing. Your code is transmission control circuit malfunction.

Sep 22, 2015 | Cars & Trucks

3 Answers

Dodge caravan


Both error codes you have are transmission related. P0736 is an error for reverse has wrong gear ratio. P0700 is a general transmission problem code
http://www.obd-codes.com/p0700
http://www.obd-codes.com/p0736
for more information.

Mar 22, 2015 | Dodge Caravan Cars & Trucks

2 Answers

Can A DTC P0750 Generate A DTC P0706?


Yes! One is related to the other. The first is low/reverse solenoid malfunction and the second is an indication of range failure.

Aug 29, 2014 | Cars & Trucks

1 Answer

I hav a 2006 Cadillac STS and I'm having a problem with it jerking when I shift from park to drive and sometimes reverse but mostly drive. Sometimes while I'm driving it gives a little jerking like someone...


I suggest you have the car's computer scanned for trouble codes. If there are codes , they will identify where the problem is. Auto Zone and Advance Auto will do a scan.

Jun 12, 2014 | Cars & Trucks

1 Answer

Chevry optra. engine light comes on hard shifting into drive


Take it an have checked for DTC'S - diagnostic trouble codes . Do you know what they are ? Check Engine Light On

May 09, 2014 | 2009 Chevrolet Optra 1.6

1 Answer

2007 GMC Acadia


The first thing I would want to know is where the fluid is going.
If the transmission has an electrical problem with a sensor or solenoid, you should have a check engine light with a trouble code.

Jun 28, 2013 | GMC Acadia Cars & Trucks

1 Answer

Transmission problem on my 2001 dodge caravan


Not good if it makes a grinding noise. Needs a tech or replacement as something most likely has come loose inside the transmission.

Sep 01, 2012 | 2001 Dodge Caravan

1 Answer

2001 dodge caravan 3.3l v6 dtc 0700 & 0740


If it ran out of gas you may have sediment in the fuel lines causing rough running which may trigger a transmission code due to improper vacuum due to the rough running.

Feb 24, 2010 | Dodge Caravan Cars & Trucks

1 Answer

Hard jerking in reverse and drive


you have to take your car to workshop and check transmission with computer, that is ONLY way to know problem of your transmission.

Oct 15, 2009 | 2004 Mercedes-Benz Mercedes Benz E Class

Not finding what you are looking for?
2005 Dodge Grand Caravan Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...