Question about 2001 Dodge Dakota

1 Answer

How do i replace the blower motor

I need to know how to replace the blower motor

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,316 Answers

Your handy dandy shop manual will explain this, but many vehicles require that you remove the passenger inner fender panel to gain access.

Posted on Dec 15, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace the blower motor resistor


David, Check the attached links,instruction and guides on replacing blower motor resistor. you can also google search your make and model# blower motor resistor replacement. Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to replace Blower Motor Resistor
How to replace blower motor resistor in Chevrolet Silverado
https://www.automd.com/633/how-to-replace-a-blower-motor-resistor
the blower motor resistor replace Google Search

Apr 30, 2016 | Cars & Trucks

1 Answer

Impala blower fuse


Hi Victor, I'm glad to help!
First Victor, let's make sure its not the blower motor. Run power and ground from the battery to the blower motor and see if it works, if it doesn't replace the motor. If it does work. NOTE: Most vehicles, when the blower motor quits works its because the blower resister is bad. The fuse that powers the motor is usually a 30 amp fuse, on some vehicles its under the hood on others its in the fuse box inside the vehicle. Before going through all this first check power and ground at the blower motor connector to see if your loosing POWER or GROUND. Because you need to know which one your loosing. BUT, if I were working on it and knowing what I know about blower motors not working I'd replace the BLOWER RESISTER first. Hope this helps and have an awesome day Vivtor.

Jan 09, 2014 | Cars & Trucks

1 Answer

I need to know which relay controls the blower motor.


If the blower does not work at all the first thing I would do is tap the blower motor with the handle end of a large screwdriver with the key on and the blower speed set to high. If the blower starts to work than replace it. If it still doesn't work wiggle the connector at the blower motor. If it starts to work replace it.

Other wise read through this how to tip

http://www1.fixya.com/cars/r6571076-blower_motor_not_work

If that doesn't help than I will need to know if you have manual or automatic HVAC. with automatic you will set a temp and it will automatically maintain that temp.

Once I know that I will be able to help you identify the blower motor relay.

If you have any questions let me know!

Oct 14, 2011 | 1995 Buick Park Avenue

2 Answers

My blower motor only works on 1 & 2 & 3 speeds dont work on 4 & 5. I was told to buy a blower motor. Need to know where this is located to replace on my 2005 Chevrolet Trailblazer


If your blower works at some speeds and not others, the likelihood of the blower motor needing to be replaced is low. The more common problems would be either the switch or the resister that regulates the motor speed. The resistor is usually located in the air duct under the dash.

Jun 17, 2011 | 2005 Chevrolet TrailBlazer

2 Answers

The heater fan is not working. Is it a fuse?


fuses are the easy thing to check just pull one and look at it if you see a burned spot replace it, checking relays and blower motor resesters and blower motors are harder if you dont know how to do it. there best left to a shop to check.

Dec 16, 2010 | 1999 Plymouth Voyager

1 Answer

Hi, i need to remove and replace the blower motor for the a.c./ heater, and dont know where it is located. can you please help?


Blower Motor Removal & Installation To Remove:
  1. Remove the insulator from under the right side of the dash.
  2. Disconnect the electrical connector from the blower motor.
  3. Remove the blower motor retaining screws.
  4. Remove the blower motor.
To Install:
  1. Install the blower motor.
  2. Install the blower motor mounting screws.
  3. Connect the electrical connector to the blower motor.
  4. Install the under dash insulator.
prev.gif next.gif

Dec 10, 2010 | 1999 Pontiac Grand Prix

1 Answer

Ac stopped blowing any type of air


things to check; blower fuse, blower relay, fan control, blower motor resistor, blower motor.

You can check for power at the plug for the blower motor and back track from there. If you have power at the plug then you need to replace the blower. A cheap 12V probe tester will tell you everything you need to know. Let me know your findings and we can narrow down the possibilities

Sep 03, 2010 | Chevrolet 1500 Cars & Trucks

1 Answer

How do I remove and replace Corolla 2006 blower motor?


Well the blower motor is underneath the dash on the passenger footwell, you have to remove the glove compartment to gainaccess to the blower, it ahas 3 or 4 bolts holding the motor, remove and replace with new unit, it is a good idea to replace the filter once the motor is removed.

Jul 16, 2009 | 2006 Toyota Corolla

1 Answer

Need to replace the blower motor on my 2002 silverado


2002 silverado as follows :
1. if equipped , remove the sound insulator panel , remove the blower motor insulating cover screws , disconnect the electrical connector from the blower motor , remover the blower motor insulating cover , pull the retaining tab down while turning the blower motor counter clockwise in order to disengage the blower motor from the HVAC module , remove the blower motor .
2. to install blower motor , reverse the steps .

thanks for voting.

Dec 28, 2008 | 2001 Chevrolet Suburban

Not finding what you are looking for?
2001 Dodge Dakota Logo

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...