Question about Jeep Liberty

1 Answer

No spark on cyls 2 & 4

Replaced plugs and coils only to find there is no spark at those 2 cyls only. Checked #1 and it had spark, put that coil and plug on 2 and 4 connector and no spark?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Double posted, backup one post and read

Posted on Mar 30, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Pontiac Vibe - 4 Cyl. 150k miles. Ignition coils keep going bad - every 4-6k miles. Coil 1 has been replaced 4 times, Coil 3 once. Coil 4 twice in the past year (20k miles). All spark plugs


Install new spark plugs, 4 new coils & replace the oxygen sensors

O2 Sensors are only good for 100,000 miles, then slow
down or quite

No idea why the coils do not last 5 or 6 years

Cylinder #1 is always at the front on a 4 cyl

Go to Rock Auto --Buy Wells Coils,NGK Double
Platinum Plugs & NTK O2 Sensor

Those parts are expensive because you have a Totota
Motor I guess

Clean MAF Sensor with CRC MAF Sensor Cleaner

Jan 08, 2013 | 2003 Pontiac Vibe

1 Answer

Plugs 1 & 4 no fire?


V-6 I ASSUME? MORE THAN LIKELY, 3 COIL PACKS CONTROL 2 CYLINDERS EACH. MAKE SURE YOU ARE GETTING A SPARK FROM THE ONE THAT CONTROLS 1 &4...OR ALL WIRING IS INTAVT
** IF THIS IS A 4 CYL. SAME THING...LESS COIL PACKS IE: ONE COIL PACK FOR 174 AND ONE FOR 2 & 3

Aug 05, 2012 | 2003 Dodge Caravan

1 Answer

2006 dodge caravan, 6 cyl. relaced cole, sparkepugs and wires in oct. 2009. Engine is reading #2 cyl. misfire again. Why


Firts time swap spark plug & ignition coil between two different cylinders and read again if the same #2 cyl. misfires !
If #2 cyl. is OK and another cyl. misfires then spark plug or ignition coil is out of order and must be replaced.
If #2 cyl. misfires again then #2 injector must be checked !
If ignition coils & spark plugs (complete set for 6 cyl.) are replaced then you must check #2 injector !

Mar 15, 2010 | 2006 Dodge Caravan

1 Answer

02 cavalier with no spark on cyl 2 and 3


did u replace the wires? You might have power but a bad connection to the spark plugs or just bad spark plugs. just a thought

Aug 17, 2009 | 2002 Chevrolet Cavalier Coupe

1 Answer

How do i plug in the spark plug coils? what order?


If it's the four cyl., the first coil pack bolts over the #2 spark plug. The #2 coil pack wire plugs into #3 spark plug. The number two coil pack bolts directly over the number four spark plug, and the #2 coil pack wire plugs into the #4 plug. The firing order is 1-4-2-3.

Jun 30, 2009 | 2000 Mazda Protege

1 Answer

I am helping my daughter with her 2005 Altima 2.5 They were driving it on the highway and the check engine light came on, started missing, loss of power. It was smoking white (not like a burning type of...


First thing you can do to eliminate a possible cause is trade the coil packs between 1&4, and 2&3. Check again and if 1&4 are now dead, then you replace the bad coil pack.

You stated that the plugs were wet, but didn't say from what. What did the plugs smell like? Oil, fuel, or coolant?

Please let me know what was on those plugs, as there could be other causes as well.

Apr 18, 2009 | 2005 Nissan Altima

1 Answer

Dead cylinders 2003 sebring


it sounds like you may have the wires on the wrong coil. It should be #1 on the #4 coil, and the #3 wire on the #2 coil. you probably have them backwards so 1 and 3 are firing on the exhaust stroke.
the firing order is 1-3-4-2.
they should be hooked like this.
82c8490.jpg

3ddfc56.jpg

Jan 23, 2009 | 2003 Chrysler Sebring

2 Answers

Daewoo lanos 2000 car is misfiring and wont run properly firing on cylinders 1 and 4 misfiring


have you changed the ignition wires? perhaps firing order crossed? if not coil pack or ignition wires faulty how do you know it is not "FIREING" on 1 & 4 have you tested it with a spark tester tool???

Dec 23, 2008 | 2000 Daewoo Lanos

1 Answer

No Start, No Spark, for Grand Caravan 3.8L


we get remans bad out of the box......... good luck

Sep 26, 2008 | 1996 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...