Question about 1995 Chrysler Concorde

1 Answer

FUSE FROM BATTERY BLOWS WHEN IGNITION SWITCED ON

WHEN IGNITION SWITCHED ON THE FUSE BLOWS

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chrysler Master
  • 2,620 Answers

There is a short to ground somewhere.Look for a hot wire touching metal.

Posted on Mar 30, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Blown starter fuse


Check the starter solenoid for a short to ground.

May 20, 2014 | 1996 Mitsubishi Galant

1 Answer

Radio amp fuse blows


problem could be radio.10 amp fuse for ignition switch power up radio display the 30 amp fuse for radio amp system in which that circuit hot at all times.

Nov 18, 2013 | 1998 Lincoln Continental

1 Answer

30 amp Starter/Ignition fuse keeps blowing when i turn the ignition key. The instrumentpanel lights are dim and then the fuse blows.


I am assuming you are talking about the circuit that powers the key switch. I'm showing a fuseable link to the starter relay instead of a fuse.
If it is the circuit that powers the switch, I would disconnect the switch and see if the fuse blows as each circuit is powered one at a time using a jumper wire. You can get 30amp circuit breakers that plug into the fuse slot to use while you are testing circuits.
You may need a repair book or shop manual to find out what is powered by that fuse since it is most everything on the car.

Mar 01, 2013 | 1997 Dodge Avenger

1 Answer

Put a new motor in my 1990gmc truck 1990year.It ws a 10 amp fuse for the ignition, what is wrong/blo


Hello! Just because you changed an engine does not mean that something unrelated hasn't occurred... In the fuse box is the 10A fuse in the far left row...Third fuse down?....If it is that is the ECM ignition Fuse...Tracing from the ignition switch it is a Pink wire that goes to a 3A in-line fuse and changes color to Purple/White then on to the ECM...When the fuse blows is there battery on the Pink wire?...If not...Pull the blown fuse...Disconnect the main Battery terminal...Set multimeter to the X 10 scale...Place one lead on each side of the pulled fuse socket and the other lead to bare metal ground...Does either side read resistance to ground?...If it does turn the ignition key from off...To ACC,.. to start and finally hold on run...Does the ground go away in any of those positions? if it does I would suspect one of the ignition switch wires is touching ground...Hard to find...But if you alligator clip the meter in place and wiggle the ignition wires you may see it come and go...Indicating where you are moving the harness the bare wire is pinched to ground...
However...If the movement of the key does not produce a change...Remove the fuse box...Flip it over... identify the wire on the fuse that blows and trace it with meter in-place wiggling as you move through the harness until you find the bare spot touching ground...

An easier softer way is to identify the color of the wire that connects to the ECM IGN FUSE...It will be Red, or Purple/White and go to the ignition switch...Cut it on both ends and run a wire of the same gauge from point to point...Guru...Saailer

Jun 01, 2012 | GMC C1500 Cars & Trucks

1 Answer

20 AMP FUSE BLOWS WHEN IGNITION IS SWITCHED ON IGNITION SWITCH TESTED AND OK


something connected too ignition sdwitch has short to ground. remove all fuses except 20amp that blows turn on ignition see if blows. if not replace one by one till it does to isolate circuit. which fuse is blowing and where is it located.

woodysmechan kiesha76@hotmail.com

Mar 10, 2011 | 1999 Suzuki Vitara

1 Answer

When i turn my key to the start position the ignition start/run fuse blows. 2004 ram 1500 3.7 engine


probably a bad starter solenoid, first remove the negative battery cable, then remove the two wires from your starter, wrap them in black tape so they wont short out on anything, repl,ace your fuse and hook battery back up and turn key to start, no blown fuse-bad starter, if it blows the fuse it's a wiring short and you should take it to a qualified mechanic

Nov 24, 2009 | 2004 Dodge Ram 1500

1 Answer

A/c fan blows without car turned on or key in ignition


Either you have connected your wiring incorrectly, recheck all of your wiring connections, Or the power supply for the fan is coming straight from the battery instead of running through the switched relay, most likely the relay is stuck closed allowing the fan to stay on.

Aug 21, 2009 | 2003 Chevrolet Impala

1 Answer

Ignition fuse blows every time


Please replace the fuse with a higher rated fuse like 50 to 100 amp.

Take care.

Please rate this fixya.

Apr 10, 2009 | 1998 GMC Jimmy

1 Answer

Main Fuel Pump


Fuses mean short somewhere.Fuse is always live it feeds relay but in tank pump [ fuse#4or#6 i forget anyway visa versa ] is not live until this.Relay clicks once when key tuned to on and once more when key turned to crank engine it is under dash by glove box and loud enough for someone with ear at this spot to hear.In tank pump should not be live until engine starts to crank.

Aug 03, 2008 | 1984 Volvo 240 Series

Not finding what you are looking for?
1995 Chrysler Concorde Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...