Question about 1996 Ford Mustang
Is there a trunk release button is the car
I have a 1996 Mustang and my trunk release button is located on the inside of the Glove Compartment, it is yellow and on the left hand side of the Glove Compartment.
Posted on Mar 30, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This may sound silly but do you not have a key to open the trunk or a 'FOB' that you can just press the button to open the trunk. You may want to go to your Ford dealership to get a 'FOB' or a remote, may cost you around $40.00
Maybe a fuse needs replacing......That's all I got, good luck.
Posted on May 09, 2010
So your trunk release button on the dash dpesn't seem to open the trunk.
Does your key fob button open the trunk? yes....then could be problem with switch but read on.
no......are your power door locks not working as well. not working.....check
fuse, on 2001 Focus the fuse is a 20amp number 63 on the back of the fuse panel under the dash. Pop cover off and undue the rwo screws. hold plastic retainers and pull off the fuse panel from metal frame. pull fuse panel down toand turn over so you can see the fuse.check fuse. blown? yes.......replace fuse with good one. test all door locks open/close then check fuse...if its blown the problem is something to do with the door lock circuits. if the fuse is still ok...try pushing the trunk open button. fuse still ok? then I am a loss toas to whats the problem but if the fiuse blew when trying the trunk button your problem is the trunk latch circuit.
Now if the trunk latch button is popping the fuse then disconnect wiring to
trunk latch (in trunk) and try the button again. Still blowing the it is the electrical before the trunk latch unit. If it did now blow the problem is something to do with the part of the circuit you disconnected.
How to go farther and find the problem exactly is not covered in this answer. You have to take it from here. JAG
Posted on Nov 07, 2012
Tips for a great answer:
Jan 24, 2016 | Ford Cars & Trucks
Jan 19, 2016 | Cars & Trucks
Oct 19, 2013 | 1999 Mercedes-Benz CLK
May 25, 2011 | 1996 Pontiac Bonneville SE CA Value
Oct 31, 2010 | 1997 Chevrolet Lumina
Sep 29, 2009 | Cadillac DeVille Cars & Trucks
May 29, 2009 | 1996 Pontiac Grand Am
Mar 15, 2009 | 1996 Pontiac Grand Am
241 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: