Question about 2004 Jaguar XJ-Series

Open Question

P1582 code how to reset the code p1582

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is fault codes P1582


Type: OBD P1582

That is how you look up codes

Aug 05, 2014 | 2002 Volkswagen Cabrio

1 Answer

P1582 jaguar s type


the 1582 code is a flight recorder code meaning that at some point one of the following has happened: the inertia switch has been triggered,throttle body signal has triggered the limp mode,the engine starts but stumble and then shuts off,or engine fail to start,or a engine stall has occured.This is what causes this code.If the issue was resolved,clear the code becuae it can become permanent and although the car will run fine the code will be there without a mil showing.

Mar 21, 2014 | 2003 Jaguar S-Type

1 Answer

Jaguar codes p1582


P1582 is special in some way. You don't need to clear it any time soon (or, I suppose, at all). As the wording shows, it's about data being logged not a fault. (But a fault will have led to the storing.)

Aug 12, 2013 | Cars & Trucks

1 Answer

Jaguar xtype code p1582 how to remove


P1582 - EDR (Engine data recorder) can not be remove with a reader has to be taken to the dealer.

Feb 03, 2013 | 2003 Jaguar X-Type

1 Answer

Check engine on with code p1582


the code p1582 means Idle Adaptation at Limit. Know more about the car diagnostic tool to check the car.

Nov 02, 2012 | Cars & Trucks

1 Answer

What is code scan p1582 on a 2001 volkswagen beetle?


P1582 Idling Speed Regulation Adaptation Limit Reached

This fault can be caused by several factors, one being a dirty throttle body. Another could be a small vacuum leak. The last could be a loose timing belt. First I would check and make sure the timing belt is not too loose. Very common cause. Then if you are sure that you don't have any broken vacuum lines, and the PCV tube is not torn, then remove and clean the throttle body. Note that clearing the fault will not always keep it from coming back. You will need to disconnect both battery cables, and touch them together, this will cause the ECM to reboot and reset all learned values for idle adaptation. You can then clear the faults. If you fail to clear the learned values the fault will come right back as soon as you start the vehicle. Make sure you have the radio code as you will need to reset the anti theft code on the radio.maybe Super VAG K+CAN V4.8 can help you solve this problem.

Jul 01, 2012 | 2000 Volkswagen Beetle

1 Answer

My vw jetta 98 turns but wont start and also read the obd code p1582 0103 1613 and 1580


P1582- Idle Adaptation At Limit
0103- I believe is a MAF code and that is your air sensing system. could be not getting enough air. this one is not on the list.
P1613- MIL Call-Up Circuit Open/Short To Positive
P1580- Throttle Actuator B1 Malfunction

Here is the link I go the codes from so if you need it for future reference.

http://www.obd-codes.com/trouble_codes/volkswagen/

Jan 23, 2011 | 1998 Volkswagen Jetta

1 Answer

1999 VW GOLF 4 CODE P1582 AND P0171 NEED HELP


just clean the throttle body... or use seafoam

http://faculty.ccp.edu/faculty/dreed/campingart/jettatech/p1582/index.htm

Apr 30, 2010 | 1998 Volkswagen Jetta

2 Answers

WON'T PASS EMISSIONS


DIAGNOSTIC TROUBLE CODE (P1582 TO P1613) DTC, DTC text, Corrective action. SAE, VAG, P1582, 17990, Idle Adaptation at Limit.

Check intake for leaks, and or loose vaccum hoses.

Sep 17, 2009 | 1998 Volkswagen Jetta

Not finding what you are looking for?
2004 Jaguar XJ-Series Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...