Question about 1964 MG B

Open Question

Fuse keeps blowing 1964 mgb no taillights signals brake lights or speedo or tach

See summary above

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1974 mgb high beam indicator on dash does not work


Those little bulbs do wear out. You really need a nimble body and small hands to reach above the speedo and tach to get at the housing that holds the bulb. As I recall it was a blue lens on that indicator and a *****-in type bulb.

Apr 08, 2013 | Cars & Trucks

1 Answer

The dash lights went out on my 2000 Buick Lesabre Custom. It doesn't have the heads up display or remote locks, though they are power. All the other lights work fine, the computer displays work, and when...


Sounds like you have some confusion going on here.
The dash lights and tail lights have always been on different circuits and fuses. So if one set of lights fail, the other stays on unless the headlight switch blows up.
The fuse marked "instruments" is for the speedo and gas gauge, not the lights.
On your car there is an instrument panel module and a dash integraded module which both involve the dash lights.
You may need a shop manual to get the wiring diagrams and test procedures for this circuit.
Another thing - after 1998 most cars and trucks switched from having the headlight switch provide power to having them provide the ground connection.

Apr 22, 2011 | 2000 Buick LeSabre

1 Answer

My tail lights are not working, it keeps blowing my fuse.


1.Unplug your taillights at the sockets and the front running lights from sockets.
2. put in new fuse after unplugging taillights.
3 turn on taillights if fuse blows then the wiring is grounding out somewhere between the switch, fuse panel, and rear and or front parking lights.
4.If fuse does not blow then plug in one socket at a time keep rechecking fuse. when the fuse blows after plugging in a certain socket suspect that one to be bad and replace.

Sep 15, 2010 | 2005 Infiniti G35

2 Answers

98 jeep tj.brake light fuse keeps popping but only brake light fu


if it is rusty underneath you could have a shorted wire

Jan 09, 2010 | Jeep Wrangler Cars & Trucks

1 Answer

Taillights and signals work but no brake lights?


Check the brake light switch. It should be energized when the switch is depressed. (constant power in and power out only when pedal is pressed) Taillights and signals power through the steering column and light switch. BUT first check the fuses. I seem to remember there being a fuse for the truck brake lights and another for the trailer brake lights. Use a tester and check trailer wiring brake lights. If they work, look for the truck brake light fuse.

Sep 24, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Taillights and license plate lights not working


there is a short somewhere.put a test light in place of the fuse.
the light will glow bright.when the short is removed,the light will go dim

Jul 18, 2009 | 1997 Nissan Pathfinder

1 Answer

My left rear taillight keeps blowing a fuse... and then going out...the brake lights work and the turn signals work... but taillight does not.


you should look at the socket and the wires at the socket for a burn mark or damage.if so you can replace a socket.

Jun 22, 2009 | 2002 Chrysler Town & Country

1 Answer

98 saturn fuse keeps blowing


Yes, the timing of the start of the problem indicates it's something that happened then. It could be a wire on the assembly was pinched or covering damaged by a screw holding it in place. How quickly did it blow the 1st replaced fuse? Let me know how u make out.

Apr 05, 2009 | 2000 Saturn SL

Not finding what you are looking for?
1964 MG B Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top MG Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Bryan Mcphee
Bryan Mcphee

Level 1 Expert

23 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4899 Answers

Are you a MG Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...