Question about 2010 Jeep Compass

Open Question

Brake switch on 2010 compass

How to remove

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Brake lights won't turn off in a 2007 jeep compass.we have replaced the brake light switch according to the manual instructions and the lights are still on.What should i do next?

was there an adjustment on the brake pedal switch plunger ?

is your compass fitted with cruise control

cruse control brake switch shown

any slack in the brake pedal spring return
or side slop in the brake pedal arm at its booster pin and clip


Aug 06, 2016 | Jeep Cars & Trucks

1 Answer

How to change blower motor resister 2010 jeep compass

its under your glove box it may be your whole blower motor that has to be replaced. it also might be right next to your blower motor. you just need to remove the bolts and disconnect the wires. if they give you new wires i would replace them too. they tend to get a high resistance so that the blower motor doesnt get enough power

Jun 17, 2015 | 2010 Jeep Compass

1 Answer

Driver side window doesen;t go up in 2010 jeep compass

All other windows work? If so window button (switch) is bad, or worse case id electric motor drive is bad or "jambed"

Mar 06, 2015 | 2010 Jeep Compass

1 Answer

Back door will not open on my 2010 Jeep Compass

via all way? fob and key.? it fails.
is the kids lock off? there is a switch that prevents brats from
opening doors, in rear. check that first. (the FSM covers this)
if all ways fail then the inside if the hatch cover needs to come off
and then find the cause (mech. /electric) or get it serviced

the FSM book is here, buy one and be DIY, big time. or?

Nov 18, 2014 | 2010 Jeep Compass

1 Answer

Where to find brake light switch for 2010 jeep wrangler?

see brake pedel, upward, bingo.

The brake light switch is mounted in the pedal support bracket and is operated by the pedal.
  1. Remove the steering column cover and lower the trim panel, if necessary.
  2. Disengage the switch electrical connection.
  3. Screw the switch out of the retainer, or rock the switch up and down, then pull it rearward out of the retainer.
  4. Installation is the reverse of removal.

Oct 01, 2014 | 2010 Jeep Wrangler

1 Answer

Will a faulty neutral safety switch cause a car not to turn over?

Yes, the neutral safety switch prevents the engine to be started except in park or Neutral. When the switch is faulty, it will not start anymore in any position.

Aug 13, 2014 | 2010 Jeep Compass

1 Answer

Stuck in park in 2008 jeep compass

does the horn sound when you press the horn switch. if it does not sound replace horn fuse, Or else check brake light switch

Mar 11, 2014 | 2008 Jeep Compass

1 Answer

The back red lights from my jeep compass 2011 are on,how do i turn them off?

Is it the brake lights,if so,go to brake pedal and check stop light switch,may be loose.If it's your rear lights,then it could be light switch is bad.

Oct 24, 2012 | 2007 Jeep Compass Limited

Not finding what you are looking for?
2010 Jeep Compass Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides