Question about 1996 Jeep Cherokee Country

1 Answer

Dont know what year my jeep is

I know the year is on the driver door it says 9 95 the book says 96 and there are 96 and 95 parts all over and it has never been wrecked

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

The build date is not the year model date.
ever wonder how car 1996 is made way before the dec 1995 date?
magic, no , its cars are made early.
your car is 1996. year model all parts in stores are by model year.
there is one exception. and that is (allcars)
that when buying from the dealers counter , the VIN suffex numbers
can infact effect the correct part to buy.
this is because, parts can in fact change mid year.
that is why factory parts always fit. for that and 100 other reasons.
(china parts sux)

Posted on Apr 21, 2014


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: '96 Jeep Grand Cherokee -driver door shows ajar, dome light is on

remove the door switch, clean and reinsert. It switched ground to a black cable, which goes to the PCM.

Posted on Mar 30, 2009

  • 6982 Answers

SOURCE: I have a '96 jeep grand cherokee laredo that the

If the door hinges are not beginning to tear off the body, you may either have a bad latch assembly or you may need to move the striker pin that is sticking out of the door post. I believe yours has a torx socket opening in the end. loosen it and slide it around 'till the latch engages better (usually move it about 1/16 to 1/8" down)

Posted on Jan 06, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

96 JEEP cherekre Laredo. Inside drivers door latch is broken. I don't want to get a nrw door

Debbie, Go to the auto wreckers for replacement, they will have thew part and can install for you cheap.

Feb 27, 2016 | Jeep Cars & Trucks

1 Answer

Where can I download a Haynes Service and Repair Manual for a 2006 Jeep Grand Cherokee 3,0L Diesel Lerado-in PDF for free?

there is no free Haynes, why ask ?
Haynes , blocks them all now, fact.
why not buy one, like we do....
or better why not say what country your in.
as this is a USA site and we dont have books on your car.
our books are wrong for non usa cars.
I can tell you're not in usa with 3,0L we use 3.0L (that dot for decimal notation)
so where are you?, worlds a big place, be the first eva?????
as are EFI systems different and smog and safety laws.

we use haynes and chitons for doors stops here
they mix 10 years of cars in a book of toxic soup. junk.
why use that bad info.?
why not use real books, from JEEP, that are dead accurate.
call jeep,?

here is our 05 to 10 WK ( I own a 2010, and others)

this is a very complex car! is yours 4wd?
so using weak books on this car, is kinda, OVERTHETOP.
we dont have that Diesel either. IMO !!!

Feb 08, 2016 | Jeep Grand Cherokee Cars & Trucks

1 Answer

How do you remove door panel on 2015 compass

which door.?
inside door card and skins....
same as allcars... youtube that? watch 1000s do it first?

its under warranty, why do this.. risk killing that?
wild guess, DIY audio mods?
on most cars, remove by pulling (pry) with a plastic pry bar.
at lower edge of card, and hear that sound POP.
do that and remove anything that stops you from proceeding.
arm rests.
lock lever. and plates.
then when free, lift straight up, clearing the upper, lip seal.
most cars that does it.
or read the FSM ?
buy the FSM book and read the body chapter,
it covers this in every itty bitty step.
oops its missing, this is normal for in warranty cars.
they dont want you fiddling any in warranty car.

book will be out maybe in 2016, (call jeep and ask)
go to dealer, walk to the parts counter and say
name of car and factory service manual, (CD)

Oct 24, 2015 | 2015 Jeep Compass

1 Answer

I need a diagram for the firing order to this 1996 jeep Cherokee 4.3 or straight six engine don't know what it is call

all i6 are some
you change out spark plug wires not marking cap first?
the 96 , is 4.0L and 2.5L not 4.3. so.....
why use wrong engine name?
they made 5 million 4.0L

rtm , the book shows how to replace parts and not make errors
and not get hurt.

XJ jeep it is 1996 , if not in usa say so, as jeep does make export models, and uses different parts. so......................?

Mar 12, 2015 | 1996 Jeep Cherokee

3 Answers

How do i find the engine number of my suzuki samurai

this is easy, and i dont need to guess.
first off we, dont know what engine you have
G 16 what>? many sammi are swaps now, huge that is.
the FSM covers this. a free book,
here Ill post that. (why not post a photo of yours?)

25513060-xcqoluy0r3kgpc4qbsqstagz-4-0.jpg my G16 is here, very clear, outside USA< they dont have year code !
all this is reg. by law. of your country

that is the lower left mount bolt on bell housing, below master cylinder, G16T is 96' year T = 96

Mar 04, 2015 | 1994 Suzuki Samurai

1 Answer

Dont know what year my jeep is

The Jeep is a 1996...all companies start producing they're vehicles 3 or 4 months in advance for the following year

Mar 29, 2014 | 1996 Jeep Cherokee Country

1 Answer

What years would work for a driver door on a 2dr. 1992 jeep cherokee

junkyards have part interchange information. find one in the phone book, call them and ask what years will interchange and do they have one. if they don't have one they can get you one. every jeep I ever saw had crappy hinges, so do yourself a favor and put new hinges on the door when you find it before you put it on. you get hinges from the dealer, they are still around. getting a door lined up takes a knack, i would pay a body man 20 bucks for a half hour of his time sticking the thing on right.

for a small fee you can do a parts request online through many member recyclers. google it. i have never found a part nearby with that method, means a lot when you are thinking about shipping something like a door. The old fashioned phone still works for some things.

Oct 19, 2010 | 1992 Jeep Cherokee Sport

1 Answer

'96 Jeep Grand Cherokee -driver door shows ajar, dome light is on

remove the door switch, clean and reinsert. It switched ground to a black cable, which goes to the PCM.

Mar 25, 2009 | 1996 Jeep Grand Cherokee

2 Answers

Wipers and pump motor don't work

Go to your local car dealer to get a diagram for free. If this is helpful, please post as such.

Jan 17, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Info panel by gear shifter is not working anymore 96 grand cherok

the info center was not working in my 96 jeep when i got it. it serves no major purpose other than a clock and to let you know when your doors are open. i replaced mine the part itself can be found at junkyards fairly cheap. i paid $65 for mine. and now i wish i had left it alone. constant annoyances and chimes.

Dec 06, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Cherokee Country Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides