Question about 2000 Hyundai Accent

Open Question

Hyundai p1210 Everything i know its fail code that says p1210 the model is 2000-2001

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi I have a 2005 hyundai elantra. abt 2 dys after oil chg started stalling. Mechanic has checked everything. no check eng light. No codes

Pump pressure and "volume" were both tested ? How about the ignition module ? Crank sensor heat failing .

Aug 17, 2017 | Hyundai Cars & Trucks

2 Answers

How does this code P1210 DTC Definition mean?

P1210 is not a Toyota code. Use different scanner to read the code. Some scanner don't work on specific cars. Use advance scanner with Toyota software to read and post the new code
I will be happy to help
Good luck

Mar 02, 2015 | 1997 Toyota Camry

1 Answer

The airbag light in my 2004 Hyundai Santa Fe light is on but has never been deployed. At first it flashed on and off but now it stays on. Do you have any ideas to what the problem is?

It may just be a bad seat belt buckle, the switch breaks but is inside the buckle and you would need to replace the buckle, the coorect way to know for sure is to have the airbag computer scanned and there will be stored codes, the code will tell you what part of the system is failing or failed,hope this helps.

Dec 09, 2010 | 2004 Hyundai Santa Fe

1 Answer

Failed emission test, presented code P0446, had canister and vent valve replaced, light still on, then had smoke test, they replaced the filler tube and check engine light came back on same day

A possible answer to your problem is that the Hyundai / Kia model lines have had extensive problems with the fuel tank pressure sensor. Most notably on the Sorento and Santa Fe lines. The car models have had problems with the leak detection pump. Sounds like you are describing a Sorento as this is the code they set and quickly, if so 99% sure the pressure sensor is reading slightly high at all times and setting the code.

Aug 22, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

Code unlock procedure for hyundai HM-5064 radio

You will have to know the radio MAKE and MODEL

Then look it up here

May 23, 2010 | 2002 Hyundai Accent

1 Answer

Got Check engine light. Read code P0203. Have

Probable cause
1. Injector failed
2. Open or shorted injector circuit, or loose connector
3. Engine control module failed

let me know

Sep 23, 2009 | 2000 Hyundai Sonata

1 Answer

My car failed emissions with the following Codes P2626 & P2231. What does the code stand for. My check engine light is on.

O2 Sensor in manifold has failed, replace it and have computer reset, hope this helps, let me know

Jun 03, 2009 | 2004 Hyundai Elantra

2 Answers

Diagnostic Trouble codes...Hyundai xg300

P1191 ETS Limp Home Valve On P1193 ETS Limp Home - Low Rpm
P1607 Vacuum Sol. Valve Stuck On or Vacuum Solenoid. Valve Stuck On,
I believe you have aproblem in the electronic throttle control motor/actuator, all three code's are related.

Mar 17, 2009 | 2001 Hyundai XG300

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides