Question about 2005 GMC Envoy

1 Answer

Fuel sensor/fuel pump diagram

I would like to see a diagram of the Envoy's fuel sensor and fuel pump.

Posted by on

  • 1 more comment 
  • Jim Evans Mar 30, 2014

    Anytime i purchase a vehicle, i go to the local auto parts store and purchase a manuel for it.

  • jerry1938 Mar 30, 2014

    The dealer should be able to help you with that, but some of them will not give it to you. Even though the factory says you can get it from them. The hard way is to trace it out youself by starting at the tank write down the colors of the wires trace the wires to where you want to go. Sometimes you may have to cut the tap to see and find the wires looking for. Not the easest of doing it. Good luck Jerry

  • Sandy Mar 30, 2014

    Thank you!


1 Answer

Google the question & look on the internet

I bet your going to drop the fuel tank, if you have
issue with either

Better use a professional scan tool & smoke the evap
system, to do the proper testing before, you do a hard
job for no reason or no testing to find a problem

Get the codes then google them

Posted on Mar 30, 2014

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Go to free wiring diagrams ! Enter vehicle info. Then click on engine under systems , then fuel controls under subsystem . There you will find fuel pump electrical circuit diagram ! Here is a testing GM fuel system video ! GM Fuel Pump Relay Testing

Sep 21, 2016 | GMC Cars & Trucks

1 Answer

Changed plugs 04 envoy still hesitant between 20&30mph acceleration after that is slow too. Any answers?????

Wires, distributor, rotor, vacuum leak, O2 sensors, air filter, fuel filter, bad gas. old gas. Throttle positioning sensor, fuel regulator, weak fuel pump, dirty throttle body. Knock out all of the routine maintenance items, check for codes at advanced auto(even if your engine light is not on) and then re-evaluate it from there. And clean your fuel system at your next fill up with a can of B-12 Chem Tool from the additives section at Walmarts auto section.

May 09, 2015 | 2004 GMC Envoy

1 Answer

I need a wiring diagram for a 1998 Chevy Blazer fuel pump

The fuel pump assembly consists of fuel pump relay,fuel sensor,the fuel pump controlling fuse,its ECM B fuse. The fuel pump and oil pressure switch. ----------- For its wiring diagram, click the link below and refer the diagram:--- ----------- This should help.Thanks.Helpmech.

Oct 06, 2011 | 1998 Chevrolet Blazer

1 Answer

Where is the fuel level sensor on my 2007 Envoy?

Enovy fuel level sensor is integrate into the in-tank fuel pump.
It's the connector with 4 pins (square).
You can inspect the cable loom for damage.

Here's the LINK to view the fuel assembly unut. The square is on the top right.

Jul 29, 2011 | 2007 GMC Envoy Denali

1 Answer

Need wiring diagram for spectra premium fuel pump for a 98 gmc envoy

I have diagram for 99 jimmy, but diagram is showing incorrect labels on stock wires, so I;m stuck until I can get in touch with there tech.
Tech Support 1-800-363-8533

Feb 05, 2011 | GMC Envoy Cars & Trucks

1 Answer

I have a 2006 envoy and the fuel light is indicating that my tank is empty and it's full. How do I fix it?

This is controlled by the fuel pump/level module in the tank. The fuel tank needs to be dropped and the module replace. This is the only thing that will trigger that light is the level indicator in the tank. The module runs about $350 just so this doesn't suprise you. Let me know if you need anything else like instructions or diagrams.

Jul 06, 2010 | 2004 GMC Envoy

1 Answer

My gmc envoy having proble with gas guage always reading empty even when i fill it up

The problem is probably the fuel level sensor in the fuel tank.It can be replaced separately.You don`t have to replace the fuel pump and the level sensor.Hope this helps.Good luck.

Feb 24, 2010 | 2006 GMC Envoy

1 Answer

My 2006 Envoy gas empty light stays on even when full. What causes this?

It’s a very common problem.
The problem is the fuel level sensor, and it's attached to the fuel pump module, but can be replaced separately.
If you have less than 36,000 miles, then it's covered by GM. Just go to any GMC dealer closest to you.


Feb 15, 2010 | 2006 GMC Envoy

1 Answer

I think the gas gage in my 2004 GMC Envoy is reading too low. How can I tell and and what could the problem be?

most likely need a fuel level sensor
you need to remove the fuel tank then remove
remove the fuel pump module
the sensor is on the side of the fuel pump module (the float is part of the sensor)
hope this helps

Jan 04, 2010 | 2006 GMC Envoy

1 Answer

2006 Envoy fuel sensor failure

the sending unit for the gas gauge is in the fuel tank and part of the fule pump module, it is not sold seperately. price around $350.00, 2 hours labor to install the part. see photo

Apr 10, 2009 | 2006 GMC Envoy Xl

Not finding what you are looking for?
2005 GMC Envoy Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

75807 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides